Viktor, Hendrik, Thanks for the replies.
I go to https://wiki.ubuntu.com/S390X/InstallationGuide and see some info on preseeding, but not much on s390x type networking values. What are the netcfg variables for these questions? Please choose the type of your primary network interface thatt you will need for installing the Debian system (via NFS or HTTP). Only the listed devices are supported. Network device type: 1: ctc: Channel to Channel (CTC) or ESCON connection, 2: qeth: OSA-Express in QDIO mode / HiperSockets, 3: iucv: Inter-User Communication Vehicle - available for VM guest 4: virtio: KVM VirtIO, ... Please select the OSA-Express QDIO / HiperSockets device. Device: 1: 0.0.0350-0.0.0351-0.0.0352 [*], ... By default OSA-Express cards use layer3 mode. In that mode LL removed from incoming IPv4 packets. Using the card in layer2 keep the MAC addresses of IPv4 packets. Use this device in layer2 mode? 1: Yes [*] 2: No ... Please enter a relative port for this connection. Port: 1 An example of a CMS parmfile would be great. Thanks. -Mike M ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
