CP Query IPL gives you the parms used... You can use SAIPL to bring up z/VM the first time on new DASD (just specify correct PDVOL=) .. then run SALIPL on the IPL volume to make the parms stick and not need SAIPL next time..
Scott Rohling On Thu, Aug 16, 2018 at 2:17 PM Davis, Jim [PRI-1PP] < jim.da...@primerica.com> wrote: > I have been tasked with moving our z/VM and zlinux file system volume from > an old DASD system to a New DASD system. > All of my device numbers / unit addresses will change. > > I have been successful in moving all of the z/linux volumes. > > My problem is how to move the 6 VM volumes since the IPL text has unit > addresses in it. > > In z/vm 5.x I just zapped the 2 addresses in ipl text. > > In z/VM 6.4 the ipl text has all of 6 volume address in text and some in > hex. > > Can I use SALIPL to change these addresses? > > SALIPL was run under the covers when I installed VM6.4; Is there a way to > find out what was passed as parms to SALIPL. > > > > James Davis > jim.da...@primerica.com > 470-564-5061 > "quando omni flunkus moritati" > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
