2 Qustions

1. Why is APIC not currently handling interupts when it has in the past, and
all I did was disable USB support in the kernel?

2. Has anyone else received "interupt lost on drive <device name here>" error,
when I receive them the system hangs and I'm forced to power cycle?
currently I'm not using DMA and have not seen the error, but this makes HD
access very slow.


 Also I want to say the using lm_sensors 2.4.4, works great and I would
strongly suggest it to anyone wanting to monitor system stats during load
tests.

System STATS
============
BIOS: NJ
CPU: Duel 366@533 using 96mhz bus 
  (both CPu have passed at this speed during seperate tests)
  Voltage 2.1 on each CPU
MPS 1.1
ACPI: disabled
APM: disabled
PM: No
No IRQ conflicts
kernel 2.3.29, with LVM, I2C, and lm_sensors patches.
netfilters 0.1.2 using ipchains

Cards:
  Adaptec 2940UW, 3COM 3c509, 3c590 (vortex), and RIVA 128
Drives:
  /dev/hda 17gig (ata33)
  /dev/hdc 17gig (ata33)
  /dev/hde 17gig (ata66)

kernel options begining:
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M686=y
# CONFIG_MK7 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y

lilo entry:
# Production DUAL CPU kernel LVM/btp366/SMP/SCSI/I2C/DHCP !test kernel!
image=/boot/vmlinuz-2.3.29lvm_htp366_smp_scsi_i2c_dhcp
  label=2.3.29current
  read-only
  root=/dev/hda2

cat /proc/interupts
           CPU0       CPU1       
  0:      78244          0          XT-PIC  timer
  1:          2          0          XT-PIC  keyboard
  2:          0          0          XT-PIC  cascade
  4:          4          0          XT-PIC  serial
  5:       1616          0          XT-PIC  ide2
  7:       2109          0          XT-PIC  eth1
  8:          1          0          XT-PIC  rtc
 10:       1167          0          XT-PIC  eth0
 11:         45          0          XT-PIC  aic7xxx
 13:          1          0          XT-PIC  fpu
 14:      54463          0          XT-PIC  ide0
 15:       1461          0          XT-PIC  ide1
NMI:          0          0 
LOC:      78181      78182 
ERR:          2
NOTE: the ERR are the standard "APIC error interrupt on CPU#<number here>"
errors



Eric Gandt
 [EMAIL PROTECTED] (primary Address)
 [EMAIL PROTECTED] (secondary Address)
 http://yuri/dirtypair.org/users/egandt (homepage)


____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at 
http://webmail.netscape.com.
--
=-          To unsubscribe, email [EMAIL PROTECTED] with the       -=
=-                body of "unsubscribe linux-abit".                 -=

Reply via email to