Hi,
Andre Hedrick wrote:
> ARE ANY OF YA'LL USING THE NEW "SHARED PCI INTERRUPTS" option?
>
> Yelling to get attention to go and find and try it out..........
Sure, I'm using that since several months now... ;-))
lxi013:1 18:48:45 # uname -a
Linux lxi013 2.3.99-pre2 #10 SMP Mon Mar 20 18:10:18 MET 2000 i686 unknown
lxi013:1 18:58:05 # cat /proc/interrupts
CPU0 CPU1
0: 129794 147990 IO-APIC-edge timer
1: 2 1 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
5: 0 4 IO-APIC-edge wvlan_cs
8: 1 0 IO-APIC-edge rtc
9: 0 0 XT-PIC acpi
12: 14 10 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 4166 5347 IO-APIC-edge ide0
15: 3 5 IO-APIC-edge ide1
16: 0 0 IO-APIC-level es1371
17: 34403 34559 IO-APIC-level eth0
18: 415 415 IO-APIC-level ide2, ide3, sym53c8xx
19: 0 0 IO-APIC-level bttv
NMI: 277655 277655
LOC: 277725 277735
ERR: 25
lxi013:1 18:58:41 #
BP6 with 2 * 366@571:
..... CPU clock speed is 571.9092 MHz.
..... host bus clock speed is 103.9833 MHz.
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:DMA, hdf:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xe400-0xe407, BIOS settings: hdg:DMA, hdh:pio
hda: IBM-DJNA-351520, ATA DISK drive
hdb: LS-120 VER4 07 UHD Floppy, ATAPI FLOPPY drive
hdc: QUANTUM FIREBALL SE4.3A, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CDROM drive
hde: IBM-DJNA-352030, ATA DISK drive
hdf: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdg: IBM-DTTA-351010, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd000-0xd007,0xd402 on irq 18
ide3 at 0xdc00-0xdc07,0xe002 on irq 18
hda: IBM-DJNA-351520, 14664MB w/430kB Cache, CHS=1869/255/63, UDMA(33)
hdc: QUANTUM FIREBALL SE4.3A, 4110MB w/80kB Cache, CHS=14848/9/63, UDMA(33)
hde: IBM-DJNA-352030, 19470MB w/1966kB Cache, CHS=39560/16/63, UDMA(66)
hdg: IBM-DTTA-351010, 9671MB w/466kB Cache, CHS=19650/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3 hda4
hdc: [PTBL] [524/255/63] hdc3
hde: [PTBL] [2482/255/63] hde1 hde2 hde3 hde4
hdg: [PTBL] [1232/255/63] hdg1 hdg2 hdg3 hdg4
Cheers -e
--
Eberhard Moenkeberg ([EMAIL PROTECTED], [EMAIL PROTECTED])
--
=- To unsubscribe, email [EMAIL PROTECTED] with the -=
=- body of "unsubscribe linux-abit". -=
