Richard Cochran <[email protected]> writes:
> +struct ixp46x_channel_ctl {
> + u32 Ch_Control; /* 0x40 Time Synchronization Channel Control */
> + u32 Ch_Event; /* 0x44 Time Synchronization Channel Event */
> + u32 TxSnapLo; /* 0x48 Transmit Snapshot Low Register */
> + u32 TxSnapHi; /* 0x4C Transmit Snapshot High Register */
> + u32 RxSnapLo; /* 0x50 Receive Snapshot Low Register */
> + u32 RxSnapHi; /* 0x54 Receive Snapshot High Register */
> + u32 SrcUUIDLo; /* 0x58 Source UUID0 Low Register */
> + u32 SrcUUIDHi; /* 0x5C Sequence Identifier/Source UUID0 High */
I don't like these XxxYyyZzz either :-(
> +static void do_tx_timestamp(struct port *port, struct sk_buff *skb)
> +{
> +#ifdef __ARMEB__
> + struct skb_shared_hwtstamps shhwtstamps;
> + struct ixp46x_ts_regs *regs;
> + struct skb_shared_info *shtx;
> + u64 ns;
> + u32 ch, cnt, hi, lo, val;
> +
> + shtx = skb_shinfo(skb);
> + if (unlikely(shtx->tx_flags & SKBTX_HW_TSTAMP && port->hwts_tx_en))
> + shtx->tx_flags |= SKBTX_IN_PROGRESS;
> + else
> + return;
> +
> + ch = PORT2CHANNEL(port);
> +
> + regs = (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT;
> +
> + /*
> + * This really stinks, but we have to poll for the Tx time stamp.
> + * Usually, the time stamp is ready after 4 to 6 microseconds.
> + */
> + for (cnt = 0; cnt < 100; cnt++) {
> + val = __raw_readl(®s->channel[ch].Ch_Event);
> + if (val & TX_SNAPSHOT_LOCKED)
> + break;
> + udelay(1);
> + }
> + if (!(val & TX_SNAPSHOT_LOCKED)) {
> + shtx->tx_flags &= ~SKBTX_IN_PROGRESS;
> + return;
> + }
> +
> + lo = __raw_readl(®s->channel[ch].TxSnapLo);
> + hi = __raw_readl(®s->channel[ch].TxSnapHi);
> + ns = ((u64) hi) << 32;
> + ns |= lo;
> + ns <<= TICKS_NS_SHIFT;
> +
> + memset(&shhwtstamps, 0, sizeof(shhwtstamps));
> + shhwtstamps.hwtstamp = ns_to_ktime(ns);
> + skb_tstamp_tx(skb, &shhwtstamps);
> +
> + __raw_writel(TX_SNAPSHOT_LOCKED, ®s->channel[ch].Ch_Event);
> +#endif
> +}
And what if we're little-endian? Why does it depend on BE?
> @@ -1171,6 +1357,11 @@ static int __devinit eth_init_one(struct
> platform_device *pdev)
> char phy_id[MII_BUS_ID_SIZE + 3];
> int err;
>
> + if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
> + pr_err("ixp4xx_eth: bad ptp filter\n");
> + return -EINVAL;
> + }
> +
> if (!(dev = alloc_etherdev(sizeof(struct port))))
> return -ENOMEM;
Shouldn't it depend on CPU type?
BTW which CPU is required? IXP46x (455/460/465)? Does it work on 43x?
> + if (NO_IRQ == irq)
> + return NO_IRQ;
Don't like these either :-(
Not showstoppers but...
Also I don't like the ixp_read/ixp_write() trivial macros. Why not
simply call __raw_readl() and __raw_writel()?
--
Krzysztof Halasa
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
