On 10/31/2015 01:44 PM, Rob Herring wrote:
gmail thinks this is spam BTW.
Strange, the mailing lists do too.
On Sat, Oct 31, 2015 at 11:31 AM, Andrew F. Davis <a...@ti.com> wrote:
Add the TI afe4404 heart monitor DT bindings documentation.
Create health directory created under iio.
Signed-off-by: Andrew F. Davis <a...@ti.com>
---
.../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt
b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 0000000..d377033
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,27 @@
+* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible : Should be "ti,afe4404".
+ - reg : I2C address of the device.
+ - led-supply : Regulator supply to the device.
Is led correct name or copy-n-paste? The datasheet has tx_sup and
rx_sup for supplies.
Looking back at the data sheet it looks like it also has an io_sup.
rx_sup seems to be the supply that must be on to keep the device on.
io_sup and tx_sup can be disabled without losing register values and
reseting the device.
I'm not sure if it makes sense to list the needed supplies, so I may
just rename led-supply to tx_sup-supply and have the be the only one.
+ - interrupt-parent : Phandle to he parent interrupt controller.
+ - interrupts : The interrupt line the device ADC_RDY pin is
connected to.
+
+Optional properties:
+ - reset-gpios : GPIO used to reset the device.
+
+Example:
+
+&i2c2 {
+ heart_mon@58 {
+ compatible = "ti,afe4404";
+ reg = <0x58>;
+
+ led-supply = <&vbat>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
