Lars Brinkhoff wrote:
> I don't know if this is at all related, but here goes:
>
> I'm getting this message every now and then:
> PCI: parity error detected:
The most likely cause of this is the cyberpro video chip - due to design
problems in this chip, you'll get occasional parity errors from it even
when there is no real error. The problem is that certain registers are
not buffered, eg. you read them "live" as the hardware changes them, and
the parity generator is always one clock cycle behind.
-Ralph
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
