Okay.
So, the "bad dev id" has nothing to do with the ide. I'm okay with that,
except that I only got it when I included the IDE kernel modules.
In any case, can I assume then that my IDE interface is working properly?
If so, then what is the next step here? I don't really know what I
expected ... I guess maybe an hd0 entry in my /dev directory ... or do I
have to create that?
I'm a little lost here.
Thanks very much,
Phil
On Thu, 17 May 2001, Edmund Doxat wrote:
> On Thu, 17 May 2001, Philip Andrew Ferguson wrote:
>
> > When I compiled my kernel, I added the recommended IDE modules and it
> > compiled fine. However, when it booted, I got the following messages:
> >
> > (--cut--)
> > Starting kswapd v1.8
> > pty: 256 Unix98 ptys configured
> > block: queued sectors max/low 17661kB/5887kB, 64 slots per queue
> > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 50MHz system bus speed for PIO modes; override with
> > idebus=xx
> > eth0: BSE i82559ER 10/100 Ethernet at 0xc2800000, 00:50:15:02:00:59, IRQ
> > 0.
> > bad dev id: got 0x0, expected 0x12098086 (0)
> > RAMDISK: Compressed image found at block 0
> > (--cut--)
> >
> > The "bad dev id" worries me.
> >
> > Can anyone help me?
>
> I have the same message during the boot cycle on the nanoengine that I am
> using running kernel 2.4.2. This check is reading out the PCI device
> and vendor ID from the PCI configuration space on the network adapter
> chip and comparing it to what value it expects.
>
> For some reason that I have not investigated, this init routine in
> eepro100_bse.c is called twice, and the error message is generated on the
> second pass. In short, don't worry about it, network functionality is not
> affected.
>
>
> Ed Doxat
>
>
>
>
> *************************************************************************
> The information contained in this message or any of its
> attachments may be privileged and confidential and intended
> for the exclusive use of the addressee. If you are not the
> addressee any disclosure, reproduction, distribution or other
> dissemination or use of this communication is strictly prohibited
> **************************************************************************
>
> _______________________________________________
> http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
> Please visit the above address for information on this list.
>
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
