I don't know anything about your architecture , so
please forgive if this is a silly question. It is not clear to
me if wvdial is running on your arm device or your pc device.
Is the arm device initiating a ppp connection to the x86 device,
or vice versa? Which one is running what?
Do you have gettys spawning on that serial device? Does it
think there is a mouse there?
> -----Original Message-----
> From: Zhao Bingqi-w19411 [EMAIL PROTECTED] [iderscam/Linux-arm
> (general)] [mailto:[EMAIL PROTECTED]]
> Sent: Monday, September 17, 2001 12:55 PM
> To: [EMAIL PROTECTED]
> Subject: Help for assabet(SA1110) dialing network!
>
>
> Hello Dear all :
>
> Now I want to connect my SA1110 to internet by
> ppp , wvdial and modem.
> And I am sure that WvDial can work well on my host
> PC Red Hat 6.2.
> When I dial by wvdial , I got the message :
> --> wvdial :Internet dailer version 1.42
> --> Cannot open device /dev/ttyS0 :Device or resource busy
> --> Cannot open device /dev/ttyS0 :Device or resource busy
> --> Cannot open device /dev/ttyS0 :Device or resource busy
>
> I have compiled the kernel with linux generic serial
> driver (serial.c and serial.h)
> And deleted the kernel support option : virtual terminal
> on serial.
> I can telnet into the assabet.
> And ttyS0's major and minor is 4 and 64.
> IRQ is 4 , ioports is 0x03f8.
>
> Please help me to solve the problem.
>
> Thanks.
>
> Best Regards.
>
> Tim Zhao.
>
> _______________________________________________
> http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
> Please visit the above address for information on this list.
>
>
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
