hi all, i have a custom board based on SA1110 . i have connected igs cyberpro to static chip select 5. The most of the register sets of cyberpro 5000 contains odd address like (3CE, 3CF....). According to the reference manual they are telling while using linear mode (which we are using ) the 32 bit address should be 0xHHLLXXXX we have enabled hardware enable linear mode (MOD26 is pulled up). As per the cyberpro , we made HH as physical address LL as ( 0x80 ) enabling memory port access and enabling little endian mode when i tried to write (0x18 ) in 46E8 . i am not getting ready signal from the VGA . and system gets hanged for sometime and automatically gets reseted. i have checked the address lines, data lines, clock, reset and power. since the SA1110 which is not accecpting the address which is not on the 4 byte boundry he himself changing the address to 4 byte boundry by rotating the address. how to address the cyber pro. can any one please help me in this.
_______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
