Hi, I'm running kernel version 2.4.9-ac10-rmk2-np1. I'm using a xircom ce3-100BTX/M ethernet card for a pcmcia socket. If I startup, everything looks fine. The driver is installed, the cardmgr detects the right card. But after I gave it an IP-address with ifconfig, I can not ping the system from my host (also the reversed way is not possible). After startup the output is as follows (at the end):
ds_open(socket 0) ds_open(socket 1) ds_open(socket 2) ds_open(socket 2) xirc2ps_cs: attach() xirc2ps_cs: event(4) xirc2ps_cs: config(0xc0211000) xirc2ps_cs: found Xircom card xirc2ps_cs: cisrev=0a mediaid=01 prodid=43 eth0: Xircom: port 0xf6000300, irq 98, hwaddr 00:10:A4:8D:AC:08 Linux login: Do I forget something? TIA, Frank _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
