Hi Paul,
Thanks for the tip - the rtl8139 card works fine for me too...must be
something wierd as I have tried 3 different Tulip cards and none work.
BTW I have sort-of ported Russell King's boot loader to Integrator, but now I
suppose I have to write a rtl8139 module to make it boot :-(
Regards,
Simon
In message <000901c1e50d$0119fb20$[EMAIL PROTECTED]>
"Paul Chiang" <[EMAIL PROTECTED]> wrote:
> I use RTL8139 PCI on Integrator ARM920T and linux 2.4.18rkm3
> It is fine to telnet and ftp.
> ------------
> Paul Chiang ���T�s
> ICP Electronics Inc. (IEI)
> Software Engineer
> T e l : 886-2-26902098 ext 878
> F a x : 886-2-26425617
> Email: [EMAIL PROTECTED]
> Addr : 5F-7, No.22, Chung-Hsing Rd.,
> Shi-Chi City, Taipei Hsien, 221,
> Taiwan, R.O.C
> ----- Original Message -----
> From: "Linux" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, April 16, 2002 1:31 PM
> Subject: Tulip ethernet with Integrator/AP
>
>
> > Hi,
> >
> > I'm having fun getting the Tulip 21143 ethernet chip to work with an
> > Integrator/AP board. Seems I can kick start the transmission of the setup
> > frame, but it sets the first word of my TDESC area to 0x7fffffff (using
> bus
> > master of PCI) which looks wrong to me. After that, it refuses to transmit
> > anything, just saying that the transmit descriptor not available, even if
> I
> > set TDESC0 to 0x80000000 again.
> >
> > Has anyone had this going? Anything I should know? Any problems with PCI
> on
> > Integrator?
> >
> > Regards,
> > Simon
> >
> > --
> > Bluewater Systems Ltd - ARM Technology Specialists
> >
> > Simon Glass Bluewater Systems Ltd
> > Phone: +64 3 3779127 Level 17, 119 Armagh St
> > Fax: +64 3 3779135 PO Box 13889
> > Email: [EMAIL PROTECTED] Christchurch
> > Web: http://www.bluewaternz.com New Zealand
> >
> >
> > _______________________________________________
> > http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
> > http://www.arm.linux.org.uk/armlinux/mailinglists.php
> > Please visit the above addresses for information on this list.
> >
>
>
--
Bluewater Systems Ltd - ARM Technology Specialists
Simon Glass Bluewater Systems Ltd
Phone: +64 3 3779127 Level 17, 119 Armagh St
Fax: +64 3 3779135 PO Box 13889
Email: [EMAIL PROTECTED] Christchurch
Web: http://www.bluewaternz.com New Zealand
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
http://www.arm.linux.org.uk/armlinux/mailinglists.php
Please visit the above addresses for information on this list.
