Russell King - ARM Linux Admin wrote:
>
> Dave Baukus writes:
> > > Stupid question:
> > > Has anybody booted 2.2.10-rmk2 on an ebsa285 w/ a 21285 serail console ?
> > It appears that the ebsa285/footbridge configuration now assumes more
> > hardware than I have available. Namely,
>
> It does /not/ assume more hardware is available, but it does test for some
> additional hardware.
>
> The probing works correctly with my EBSA285 without the southbridge card
> plugged in - maybe you have some additional PCI devices in your backplane
> which are causing the PCI bus grief?
Semantics aside (you say test I say assume) I have:
NCR53c8xxx scsi card pluged into slot 3 and maped into PCI memory
at offset 0x1000 and 3com 3c905 card pluged into slot 2 and maped into
PCI
IO space at offset 0x2000. All this is on a DEC PCI development
backplane.
--
[EMAIL PROTECTED]
Inet Technologies Inc.
Plano, Texas
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
