-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Acho que voc� est� com problemas, pois esse patch � para o kernel 2.2, e voc� est� usando o 2.4. Tente entrar no site do fabricante e pegar um driver para o 2.4.
Abra�os Rafael Diniz On Monday 26 November 2001 22:11, F�bio Esp�sito wrote: > Pessoal, junto com o cd de driver da minha controladora IDE SCSI Promise > ATA 100 UltraDMA veio um patch pra instal�-la no linux, s� que diz q > funciona apenas no rh6.1 e 6.2 e se, caso o meu sistema fosse diferente pra > que eu fizesse as altera��es...por favor me ajudem... > > segue abaixo o readme... (eu uso cl7 kernel 2.4.5) > ULTRA100/66 LINUX Driver (1.00) Installation note [06.JUL.2000] > > > The Device Driver only support RedHat Linux 6.1/6.2 . > If your Linux system version is different from RH6.1/6.2. > Please, modify the patch file , rh61-u100.pat or rh62-u100.pat , > for your Linux system . > > > INSTALL ULTRA100/66 DRIVER INTO AN EXISTING SYSTEM > > 1. Make sure you have an unmodified source tree under /usr/src/linux. > 2. Patch the Linux source under source tree /usr/src : > #patch -p0 < [path]/rh61-u100.pat (RH6.1) > #patch -p0 < [path]/rh62-u100.pat (RH6.2) > 3. Make Kernel under /usr/src/linux to create new Linux Kernel with the > Promise information embedded. > #make (menu)config : enable items as follow : > Block devices/ > (enable) Generic PCI IDE chipset support/ > (enable) Generic PCI bus-master DMA support/ > (enable) PROMISE PDC202xx chipset support > #make dep > #make clean > #make bzImage > 4. Copy the newly compiled kernel into the boot directory : > cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-u100 > 5. Inform the boot loader about the new kernel to edit /etc/lilo.conf as > such : > boot=/dev/hda > map=/boot/map > install=/boot/boot.b > prompt > timeout=50 > **** ADD THIS PART ***** > image=/boot/vmlinuz-u100 > label=Ultra100 > root=/dev/hda1 > read-only > ************************ > 6. Also, update LILO by typing 'lilo' you should see an asterisk next to > the label "Ultra100" indicating that LILO is now aware of the new kernel. > 7. Reboot. The Promise Patch will be automatically included in the bootable > kernel. > > > BOOTING FROM ULTRA100/66 > > 1. Physically install the Ultra100/66 card into the Linux PC. > 2. Attach the drive which includes the new kernel to primary channel of > Ultra100/66 card. > 3. Power on PC. > 4. Set "HDD Sequence SCSI First" on BIOS and save it . > 5. Reboot. > 6. At "boot:" prompt enter : "Ultra100" > > > BOOTING FROM Mother-Board > > If you want to boot from mother-board, > Please remove Promise Ultra100/66 card from mother-board, and > attach the drive which includes the new kernel to primary channel > of mother-board,and then run the new kernel. > > > ps: > If you would like to install two Ultra100/66 cards into the Linux PC , > You can issue commands "mknod /dev/DEV b major minor" to create > device files "hdix,hdjx,hdkx,hdlx" for IDE4,IDE5 by yourself. > IDE0 : first Ultra100/66 primary channel > IDE1 : first Ultra100/66 secondary channel > IDE2 : second Ultra100/66 primary channel > IDE3 : second Ultra100/66 secondary channel > IDE4 : mother-board primary channel (major number = 56) > IDE5 : mother-board secondary channel (major number = 57) ================================================ Debian GNU/Linux 3.0 (2.2.20pre12) XFree86-4.1.0 PII 233mhz 96Mb ram SB16, USR56k, S3 VirgeDX/GX 4Mb vram, CD creative48X HDa 10Gb Quantum HDb 10Gb WD MSX2.0 256k MegaRam 256k Mapper v9938 128k Vram Uzix 1.0 -- "Hasta la victoria siempre" -- Che ==================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8A/ixHEI00U1vD6ARAofVAJkBVvbbQfgcaULysqR9qHxWHNX67ACfbo4A jygg+zX6vmCeeR6bxhD0oCg= =L3A4 -----END PGP SIGNATURE----- Assinantes em 27/11/2001: 2398 Mensagens recebidas desde 07/01/1999: 143609 Historico e [des]cadastramento: http://linux-br.conectiva.com.br Assuntos administrativos e problemas com a lista: mailto:[EMAIL PROTECTED]
