On Mon, Jan 24, 2011 at 1:07 AM, <cac...@quantum-sci.com> wrote: > > On /dev/sda I have sda1 which is my / bootable filesystem for Debian > formatted ext4. This is 256MB on a 2TB drive.
Really? How do you know it's 256 MB? > # fdisk /dev/sda > WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk > doesn't support GPT. Use GNU Parted. > WARNING: DOS-compatible mode is deprecated. It's strongly recommended to > switch off the mode (command 'c') and change display units to > sectors (command 'u'). > Command (m for help): p > Disk /dev/sda: 2000.4 GB, 2000398934016 bytes > 255 heads, 63 sectors/track, 243201 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x00000000 > Device Boot Start End Blocks Id System > /dev/sda1 1 243202 1953514583+ ee GPT ... cause the fdisk output pretty much shows the first partition uses up all space. You can check again if you want, using "parted /dev/sda print" (just in case it's really fdisk problem). > Maybe it's possible that I just mkfs.btrfs /dev/sda and it will set up -only- > the remaining space, but I'm afraid that this may destroy my OS. You might be able to boot using a live CD and use gparted to resize the current ext4 partition. > > Also, what if I want to set up the whole drive as BTRFS? Could this be > bootable, and can the canned Debian kernel load the BTRFS driver for boot at > install? Or would I boot to the CD, mkfs.btrfs the drive, then install > Debian? Anyone tried this? Ubuntu Natty's grub2 has btrfs support, but It's still in alpha stage though. Don't know about Debian. At this point it's easiest if you use ext3/4 for /boot, and use btrfs only for "/". -- Fajar -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html