Hi all. I'm trying to figuring out why my btrfs file system doesn't
show all the available space. I currently have four 4TB drives set up
as a raid6 array, so I would expect to see a total available data size
slightly under 8TB (two drives for data + two drives for parity). The
'btrfs fi df' command consistently shows a total size of around 3TB, and
says that space is almost completely full. Here's my current system
information...
===
root@selene:~# uname -a
Linux selene.dhampton.net 3.19.0-32-generic #37~14.04.1-Ubuntu SMP Thu
Oct 22 09:41:40 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
root@selene:~# btrfs --version
Btrfs v3.12
root@selene:~# btrfs fi show /video
Label: none uuid: 74a4c4fa-9e83-465a-850d-cc089ecd00f6
Total devices 4 FS bytes used 3.12TiB
devid 1 size 3.64TiB used 1.58TiB path /dev/vdb
devid 2 size 3.64TiB used 1.58TiB path /dev/vda
devid 3 size 3.64TiB used 1.58TiB path /dev/vdc
devid 4 size 3.64TiB used 1.58TiB path /dev/vdd
Btrfs v3.12
root@selene:~# btrfs fi df /video
Data, RAID6: total=3.15TiB, used=3.11TiB
System, RAID6: total=64.00MiB, used=352.00KiB
Metadata, RAID6: total=5.00GiB, used=3.73GiB
unknown, single: total=512.00MiB, used=1.07MiB
root@selene:~# df -h /video
Filesystem Size Used Avail Use% Mounted on
/dev/vda 15T 3.2T 8.3T 28% /video
===
I have tried issuing the command "btrfs filesystem resize
<id>:max /video" on each devid in the array, and also tried balancing
the array. None of these commands changed the indication that the file
system is almost full. I'm wondering if the problem is because this
file system began as a two drive raid1 array, and I later added the
other two drives and used the 'btrfs balance' command to convert to
raid6. Any suggestions on what I can try to get the 'btrfs fi df'
command to show me more available space? Did I forget a command when I
converted the raid1 array to raid6?
Alternatively, can I trust the numbers in the standard df command? The
'used' number seems right but the 'avail' number seems high.
If i can provide any more information to help figure out what's
happening, please ask.
Thanks.
David
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-32-generic root=UUID=b9fb1104-f681-4664-b0c3-b17db28d9d68 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003fffe000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fffe max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f1ff0-0x000f1fff] mapped at [ffff8800000f1ff0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
[ 0.000000] [mem 0x3fc00000-0x3fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x3fbfffff]
[ 0.000000] [mem 0x20000000-0x3fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3fe00000-0x3fffdfff]
[ 0.000000] [mem 0x3fe00000-0x3fffdfff] page 4k
[ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3597e000-0x36cb6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1E50 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000003FFFFA9B 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000003FFFF177 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000003FFFE040 001137 (v01 BXPC BXDSDT 00000001 INTL 20140926)
[ 0.000000] ACPI: FACS 0x000000003FFFE000 000040
[ 0.000000] ACPI: SSDT 0x000000003FFFF1EB 000838 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x000000003FFFFA23 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffdfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3fff9000-0x3fffdfff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:3fff5001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0x3fffdfff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3fffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x3fffdfff]
[ 0.000000] On node 0 totalpages: 262044
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4032 pages used for memmap
[ 0.000000] DMA32 zone: 258046 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88003fc00000 s86144 r8192 d32640 u2097152
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 3fc0e100
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257927
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-32-generic root=UUID=b9fb1104-f681-4664-b0c3-b17db28d9d68 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 995380K/1048176K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 52796K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Detected 3499.996 MHz processor
[ 0.004000] Calibrating delay loop (skipped) preset value.. 6999.99 BogoMIPS (lpj=13999984)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20141107
[ 0.004000] ACPI: All ACPI Tables successfully acquired
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Yama: becoming mindful.
[ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004000] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.004000] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] Initializing cgroup subsys blkio
[ 0.004000] Initializing cgroup subsys perf_event
[ 0.004000] Initializing cgroup subsys net_prio
[ 0.004000] Initializing cgroup subsys hugetlb
[ 0.004000] mce: CPU supports 10 MCE banks
[ 0.004000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.004000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.010339] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.012839] ftrace: allocating 30021 entries in 118 pages
[ 0.024409] Enabling x2apic
[ 0.024420] Enabled x2apic
[ 0.024786] Switched APIC routing to physical x2apic.
[ 0.028851] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028853] smpboot: CPU0: Intel Core i7 9xx (Nehalem Class Core i7) (fam: 06, model: 1a, stepping: 03)
[ 0.032000] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
[ 0.032956] KVM setup paravirtual spinlock
[ 0.033709] x86: Booted up 1 node, 1 CPUs
[ 0.033711] smpboot: Total of 1 processors activated (6999.99 BogoMIPS)
[ 0.033968] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.035577] devtmpfs: initialized
[ 0.039347] evm: security.selinux
[ 0.039351] evm: security.SMACK64
[ 0.039353] evm: security.SMACK64EXEC
[ 0.039355] evm: security.SMACK64TRANSMUTE
[ 0.039356] evm: security.SMACK64MMAP
[ 0.039358] evm: security.ima
[ 0.039359] evm: security.capability
[ 0.039725] pinctrl core: initialized pinctrl subsystem
[ 0.040258] RTC time: 19:03:29, date: 12/07/15
[ 0.040436] NET: Registered protocol family 16
[ 0.040729] cpuidle: using governor ladder
[ 0.040734] cpuidle: using governor menu
[ 0.040814] ACPI: bus type PCI registered
[ 0.040817] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.041597] PCI: Using configuration type 1 for base access
[ 0.044696] ACPI: Added _OSI(Module Device)
[ 0.044700] ACPI: Added _OSI(Processor Device)
[ 0.044702] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.044704] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.047891] ACPI: Interpreter enabled
[ 0.047900] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.047906] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.047910] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
[ 0.047914] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20141107/hwxface-580)
[ 0.047922] ACPI: (supports S0 S5)
[ 0.047924] ACPI: Using IOAPIC for interrupt routing
[ 0.047943] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.051685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.051692] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.051699] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.051798] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.052248] acpiphp: Slot [3] registered
[ 0.052275] acpiphp: Slot [4] registered
[ 0.052314] acpiphp: Slot [6] registered
[ 0.052352] acpiphp: Slot [7] registered
[ 0.052388] acpiphp: Slot [8] registered
[ 0.052416] acpiphp: Slot [9] registered
[ 0.052441] acpiphp: Slot [10] registered
[ 0.052466] acpiphp: Slot [11] registered
[ 0.052491] acpiphp: Slot [12] registered
[ 0.052516] acpiphp: Slot [13] registered
[ 0.052548] acpiphp: Slot [14] registered
[ 0.052579] acpiphp: Slot [15] registered
[ 0.052615] acpiphp: Slot [16] registered
[ 0.052638] acpiphp: Slot [17] registered
[ 0.052661] acpiphp: Slot [18] registered
[ 0.052684] acpiphp: Slot [19] registered
[ 0.052712] acpiphp: Slot [20] registered
[ 0.052736] acpiphp: Slot [21] registered
[ 0.052765] acpiphp: Slot [22] registered
[ 0.052791] acpiphp: Slot [23] registered
[ 0.052814] acpiphp: Slot [24] registered
[ 0.052836] acpiphp: Slot [25] registered
[ 0.052859] acpiphp: Slot [26] registered
[ 0.052883] acpiphp: Slot [27] registered
[ 0.052912] acpiphp: Slot [28] registered
[ 0.052937] acpiphp: Slot [29] registered
[ 0.052960] acpiphp: Slot [30] registered
[ 0.052983] acpiphp: Slot [31] registered
[ 0.052994] PCI host bridge to bus 0000:00
[ 0.052999] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.053002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.053004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.053011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.053014] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.053058] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.053519] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.054145] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.076006] pci 0000:00:01.1: reg 0x20: [io 0xc4c0-0xc4cf]
[ 0.086205] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.086209] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.086211] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.086213] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.086397] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.086793] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.086803] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.087032] pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
[ 0.092021] pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
[ 0.100017] pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
[ 0.108018] pci 0000:00:02.0: reg 0x18: [mem 0xfc0d4000-0xfc0d5fff]
[ 0.116023] pci 0000:00:02.0: reg 0x1c: [io 0xc400-0xc41f]
[ 0.140013] pci 0000:00:02.0: reg 0x30: [mem 0xfc0c0000-0xfc0cffff pref]
[ 0.140305] pci 0000:00:03.0: [10ec:8139] type 00 class 0x020000
[ 0.148004] pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.152004] pci 0000:00:03.0: reg 0x14: [mem 0xfc0d6000-0xfc0d60ff]
[ 0.178385] pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
[ 0.178622] pci 0000:00:04.0: [8086:2668] type 00 class 0x040300
[ 0.181221] pci 0000:00:04.0: reg 0x10: [mem 0xfc0d0000-0xfc0d3fff]
[ 0.196190] pci 0000:00:05.0: [8086:2934] type 00 class 0x0c0300
[ 0.207322] pci 0000:00:05.0: reg 0x20: [io 0xc420-0xc43f]
[ 0.212211] pci 0000:00:05.1: [8086:2935] type 00 class 0x0c0300
[ 0.222167] pci 0000:00:05.1: reg 0x20: [io 0xc440-0xc45f]
[ 0.227380] pci 0000:00:05.2: [8086:2936] type 00 class 0x0c0300
[ 0.238138] pci 0000:00:05.2: reg 0x20: [io 0xc460-0xc47f]
[ 0.242366] pci 0000:00:05.7: [8086:293a] type 00 class 0x0c0320
[ 0.244003] pci 0000:00:05.7: reg 0x10: [mem 0xfc0d7000-0xfc0d7fff]
[ 0.257192] pci 0000:00:06.0: [1af4:1003] type 00 class 0x078000
[ 0.260003] pci 0000:00:06.0: reg 0x10: [io 0xc480-0xc49f]
[ 0.266102] pci 0000:00:06.0: reg 0x14: [mem 0xfc0d8000-0xfc0d8fff]
[ 0.286392] pci 0000:00:07.0: [1af4:1002] type 00 class 0x00ff00
[ 0.289080] pci 0000:00:07.0: reg 0x10: [io 0xc4a0-0xc4bf]
[ 0.302303] pci 0000:00:08.0: [10ec:8139] type 00 class 0x020000
[ 0.306113] pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc1ff]
[ 0.310109] pci 0000:00:08.0: reg 0x14: [mem 0xfc0d9000-0xfc0d90ff]
[ 0.332003] pci 0000:00:08.0: reg 0x30: [mem 0xfc040000-0xfc07ffff pref]
[ 0.332230] pci 0000:00:09.0: [10ec:8139] type 00 class 0x020000
[ 0.336003] pci 0000:00:09.0: reg 0x10: [io 0xc200-0xc2ff]
[ 0.340002] pci 0000:00:09.0: reg 0x14: [mem 0xfc0da000-0xfc0da0ff]
[ 0.362112] pci 0000:00:09.0: reg 0x30: [mem 0xfc080000-0xfc0bffff pref]
[ 0.362262] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000
[ 0.366118] pci 0000:00:0a.0: reg 0x10: [io 0xc300-0xc33f]
[ 0.370157] pci 0000:00:0a.0: reg 0x14: [mem 0xfc0db000-0xfc0dbfff]
[ 0.392256] pci 0000:00:0b.0: [1af4:1001] type 00 class 0x010000
[ 0.396003] pci 0000:00:0b.0: reg 0x10: [io 0xc340-0xc37f]
[ 0.400004] pci 0000:00:0b.0: reg 0x14: [mem 0xfc0dc000-0xfc0dcfff]
[ 0.420275] pci 0000:00:0c.0: [1af4:1001] type 00 class 0x010000
[ 0.426115] pci 0000:00:0c.0: reg 0x10: [io 0xc380-0xc3bf]
[ 0.430112] pci 0000:00:0c.0: reg 0x14: [mem 0xfc0dd000-0xfc0ddfff]
[ 0.452160] pci 0000:00:0d.0: [1af4:1001] type 00 class 0x010000
[ 0.456003] pci 0000:00:0d.0: reg 0x10: [io 0xc3c0-0xc3ff]
[ 0.460003] pci 0000:00:0d.0: reg 0x14: [mem 0xfc0de000-0xfc0defff]
[ 0.480538] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.480596] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.480650] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.480699] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.480724] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.480921] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.481053] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.481055] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.481057] vgaarb: loaded
[ 0.481058] vgaarb: bridge control possible 0000:00:02.0
[ 0.481265] SCSI subsystem initialized
[ 0.481323] libata version 3.00 loaded.
[ 0.481349] ACPI: bus type USB registered
[ 0.481380] usbcore: registered new interface driver usbfs
[ 0.481388] usbcore: registered new interface driver hub
[ 0.481396] usbcore: registered new device driver usb
[ 0.481524] PCI: Using ACPI for IRQ routing
[ 0.481525] PCI: pci_cache_line_size set to 64 bytes
[ 0.481690] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.481691] e820: reserve RAM buffer [mem 0x3fffe000-0x3fffffff]
[ 0.481779] NetLabel: Initializing
[ 0.481780] NetLabel: domain hash size = 128
[ 0.481780] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.481789] NetLabel: unlabeled traffic allowed by default
[ 0.481876] Switched to clocksource kvm-clock
[ 0.485471] AppArmor: AppArmor Filesystem Enabled
[ 0.485516] pnp: PnP ACPI init
[ 0.485804] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.485847] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.485875] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.485901] pnp 00:03: [dma 2]
[ 0.485916] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.485975] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.486088] pnp: PnP ACPI: found 5 devices
[ 0.492173] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.492175] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.492176] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.492177] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[ 0.492196] NET: Registered protocol family 2
[ 0.492813] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.492839] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.493566] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.495245] TCP: reno registered
[ 0.495251] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.495260] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.495565] NET: Registered protocol family 1
[ 0.495588] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.495624] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.495653] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.495706] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.496293] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.499888] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.503135] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.506020] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.508188] PCI: CLS 0 bytes, default 64
[ 0.508309] Trying to unpack rootfs image as initramfs...
[ 0.774378] Freeing initrd memory: 19684K (ffff88003597e000 - ffff880036cb7000)
[ 0.774545] microcode: CPU0 sig=0x106a3, pf=0x1, revision=0x1
[ 0.774582] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.774601] Scanning for low memory corruption every 60 seconds
[ 0.776365] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.776384] Initialise system trusted keyring
[ 0.776421] audit: initializing netlink subsys (disabled)
[ 0.776446] audit: type=2000 audit(1449515030.489:1): initialized
[ 0.776817] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.779227] zpool: loaded
[ 0.779234] zbud: loaded
[ 0.779487] VFS: Disk quotas dquot_6.5.2
[ 0.779551] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.780377] fuse init (API version 7.23)
[ 0.780602] Key type big_key registered
[ 0.780891] Key type asymmetric registered
[ 0.780896] Asymmetric key parser 'x509' registered
[ 0.780957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.780997] io scheduler noop registered
[ 0.781002] io scheduler deadline registered (default)
[ 0.781053] io scheduler cfq registered
[ 0.781212] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.781238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.781295] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.781297] vesafb: scrolling: redraw
[ 0.781300] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.781390] vesafb: framebuffer at 0xf4000000, mapped to 0xffffc90000200000, using 1216k, total 1216k
[ 0.781551] Console: switching to colour frame buffer device 80x30
[ 0.781565] fb0: VESA VGA frame buffer device
[ 0.781595] intel_idle: does not run on family 6 model 26
[ 0.781705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.781711] ACPI: Power Button [PWRF]
[ 0.781946] GHES: HEST is not enabled!
[ 0.798190] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.820468] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.912272] Linux agpgart interface v0.103
[ 0.913159] brd: module loaded
[ 0.913578] loop: module loaded
[ 0.924119] vda: unknown partition table
[ 0.938315] vdb: unknown partition table
[ 0.958461] vdc: unknown partition table
[ 0.966275] vdd: unknown partition table
[ 0.966612] ata_piix 0000:00:01.1: version 2.13
[ 0.970163] scsi host0: ata_piix
[ 0.970321] scsi host1: ata_piix
[ 0.970379] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc4c0 irq 14
[ 0.970382] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc4c8 irq 15
[ 0.970525] libphy: Fixed MDIO Bus: probed
[ 0.970530] tun: Universal TUN/TAP device driver, 1.6
[ 0.970532] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 0.971087] PPP generic driver version 2.4.2
[ 0.971188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.971194] ehci-pci: EHCI PCI platform driver
[ 0.973369] ehci-pci 0000:00:05.7: EHCI Host Controller
[ 0.973382] ehci-pci 0000:00:05.7: new USB bus registered, assigned bus number 1
[ 0.973559] ehci-pci 0000:00:05.7: irq 10, io mem 0xfc0d7000
[ 0.984090] ehci-pci 0000:00:05.7: USB 2.0 started, EHCI 1.00
[ 0.984167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.984171] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.984173] usb usb1: Product: EHCI Host Controller
[ 0.984176] usb usb1: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
[ 0.984178] usb usb1: SerialNumber: 0000:00:05.7
[ 0.984311] hub 1-0:1.0: USB hub found
[ 0.984318] hub 1-0:1.0: 6 ports detected
[ 0.984501] ehci-platform: EHCI generic platform driver
[ 0.984513] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.984518] ohci-pci: OHCI PCI platform driver
[ 0.984533] ohci-platform: OHCI generic platform driver
[ 0.984541] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.986961] uhci_hcd 0000:00:05.0: UHCI Host Controller
[ 0.986969] uhci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 2
[ 0.987005] uhci_hcd 0000:00:05.0: detected 2 ports
[ 0.987060] uhci_hcd 0000:00:05.0: irq 10, io base 0x0000c420
[ 0.987131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.987133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.987135] usb usb2: Product: UHCI Host Controller
[ 0.987137] usb usb2: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
[ 0.987139] usb usb2: SerialNumber: 0000:00:05.0
[ 0.987239] hub 2-0:1.0: USB hub found
[ 0.987244] hub 2-0:1.0: 2 ports detected
[ 0.989990] uhci_hcd 0000:00:05.1: UHCI Host Controller
[ 0.989999] uhci_hcd 0000:00:05.1: new USB bus registered, assigned bus number 3
[ 0.990017] uhci_hcd 0000:00:05.1: detected 2 ports
[ 0.990075] uhci_hcd 0000:00:05.1: irq 11, io base 0x0000c440
[ 0.990141] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.990144] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.990146] usb usb3: Product: UHCI Host Controller
[ 0.990147] usb usb3: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
[ 0.990149] usb usb3: SerialNumber: 0000:00:05.1
[ 0.990251] hub 3-0:1.0: USB hub found
[ 0.990256] hub 3-0:1.0: 2 ports detected
[ 0.993143] uhci_hcd 0000:00:05.2: UHCI Host Controller
[ 0.993152] uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 4
[ 0.993180] uhci_hcd 0000:00:05.2: detected 2 ports
[ 0.993244] uhci_hcd 0000:00:05.2: irq 11, io base 0x0000c460
[ 0.993330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.993333] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.993336] usb usb4: Product: UHCI Host Controller
[ 0.993338] usb usb4: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
[ 0.993340] usb usb4: SerialNumber: 0000:00:05.2
[ 0.993489] hub 4-0:1.0: USB hub found
[ 0.993498] hub 4-0:1.0: 2 ports detected
[ 0.993718] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.994489] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.994496] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.994632] mousedev: PS/2 mouse device common for all mice
[ 0.994910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.995165] rtc_cmos 00:00: RTC can wake from S4
[ 0.995441] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.995535] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram
[ 0.995545] i2c /dev entries driver
[ 0.995617] device-mapper: uevent: version 1.0.3
[ 0.995680] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-de...@redhat.com
[ 0.995702] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.995790] PCCT header not found.
[ 0.995792] ACPI PCC probe failed.
[ 0.995893] TCP: cubic registered
[ 0.996020] NET: Registered protocol family 10
[ 0.996188] NET: Registered protocol family 17
[ 0.996203] Key type dns_resolver registered
[ 0.996427] Loading compiled-in X.509 certificates
[ 0.997356] Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
[ 0.997377] registered taskstats version 1
[ 0.999020] Key type trusted registered
[ 1.001878] Key type encrypted registered
[ 1.001886] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.001899] ima: No TPM chip found, activating TPM-bypass!
[ 1.001919] evm: HMAC attrs: 0x1
[ 1.002343] Magic number: 11:92:91
[ 1.002461] rtc_cmos 00:00: setting system clock to 2015-12-07 19:03:30 UTC (1449515010)
[ 1.002512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.002514] EDD information not available.
[ 1.002563] PM: Hibernation image not present or could not be loaded.
[ 1.124961] ata1.00: ATA-7: QEMU HARDDISK, 1.5.3, max UDMA/100
[ 1.124968] ata1.00: 104857600 sectors, multi 16: LBA48
[ 1.124975] ata1.01: ATAPI: QEMU DVD-ROM, 1.5.3, max UDMA/100
[ 1.125621] ata1.00: configured for MWDMA2
[ 1.126109] ata1.01: configured for MWDMA2
[ 1.126462] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 3 PQ: 0 ANSI: 5
[ 1.126733] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.127150] scsi 0:0:1:0: CD-ROM QEMU QEMU DVD-ROM 1.5. PQ: 0 ANSI: 5
[ 1.132733] sd 0:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
[ 1.132749] sr 0:0:1:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.132769] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.132937] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.133165] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.133425] sd 0:0:0:0: [sda] Write Protect is off
[ 1.133429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.133447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.136257] sda: sda1 sda2 < sda5 >
[ 1.136590] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.136975] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 1.136978] Write protecting the kernel read-only data: 12288k
[ 1.137265] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 1.137433] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 1.156190] systemd-udevd[104]: starting version 204
[ 1.193651] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.204385] FDC 0 is a S82078B
[ 1.218085] 8139cp 0000:00:03.0 eth0: RTL-8139C+ at 0xffffc900001e2000, 52:54:00:fb:b3:5c, IRQ 11
[ 1.223131] 8139cp 0000:00:08.0 eth1: RTL-8139C+ at 0xffffc900001e6000, 52:54:00:26:fd:fb, IRQ 10
[ 1.238342] 8139cp 0000:00:09.0 eth2: RTL-8139C+ at 0xffffc900001ea000, 52:54:00:c9:4b:3b, IRQ 10
[ 1.246561] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.416012] raid6: sse2x1 9606 MB/s
[ 1.484007] raid6: sse2x2 13948 MB/s
[ 1.552006] raid6: sse2x4 16002 MB/s
[ 1.552008] raid6: using algorithm sse2x4 (16002 MB/s)
[ 1.552009] raid6: using ssse3x2 recovery algorithm
[ 1.553215] xor: measuring software checksum speed
[ 1.592005] prefetch64-sse: 17929.000 MB/sec
[ 1.632003] generic_sse: 16612.000 MB/sec
[ 1.632004] xor: using function: prefetch64-sse (17929.000 MB/sec)
[ 1.669084] Btrfs loaded
[ 1.792338] BTRFS: device fsid 74a4c4fa-9e83-465a-850d-cc089ecd00f6 devid 2 transid 98119 /dev/vda
[ 1.793210] BTRFS: device fsid 74a4c4fa-9e83-465a-850d-cc089ecd00f6 devid 1 transid 98119 /dev/vdb
[ 1.794161] BTRFS: device fsid 74a4c4fa-9e83-465a-850d-cc089ecd00f6 devid 3 transid 98119 /dev/vdc
[ 1.795205] BTRFS: device fsid 74a4c4fa-9e83-465a-850d-cc089ecd00f6 devid 4 transid 98119 /dev/vdd
[ 1.814134] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.909817] random: init urandom read with 64 bits of entropy available
[ 1.945395] init: plymouth-upstart-bridge main process (157) terminated with status 1
[ 1.945402] init: plymouth-upstart-bridge main process ended, respawning
[ 1.959224] init: plymouth-upstart-bridge main process (167) terminated with status 1
[ 1.959233] init: plymouth-upstart-bridge main process ended, respawning
[ 2.175756] Adding 1045500k swap on /dev/sda5. Priority:-1 extents:1 across:1045500k FS
[ 2.303629] systemd-udevd[292]: starting version 204
[ 2.367261] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.384977] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.408687] lp: driver loaded but no devices found
[ 2.524279] BTRFS info (device vdd): disk space caching is enabled
[ 2.533278] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 2.658899] [drm] Initialized drm 1.1.0 20060810
[ 2.661742] audit: type=1400 audit(1449515012.154:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=399 comm="apparmor_parser"
[ 2.661746] audit: type=1400 audit(1449515012.154:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
[ 2.661748] audit: type=1400 audit(1449515012.154:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[ 2.662061] audit: type=1400 audit(1449515012.154:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=399 comm="apparmor_parser"
[ 2.662065] audit: type=1400 audit(1449515012.154:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[ 2.663823] audit: type=1400 audit(1449515012.154:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=399 comm="apparmor_parser"
[ 2.678921] audit: type=1400 audit(1449515012.170:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=413 comm="apparmor_parser"
[ 2.727964] 8139cp 0000:00:03.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 2.757807] 8139cp 0000:00:08.0 eth1: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 2.768710] 8139cp 0000:00:09.0 eth2: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 2.821692] random: nonblocking pool is initialized
[ 3.167752] FS-Cache: Loaded
[ 3.168357] [drm] Device Version 0.0
[ 3.168359] [drm] Compression level 0 log level 0
[ 3.168360] [drm] Currently using mode #0, list at 0x488
[ 3.168360] [drm] 12286 io pages at offset 0x1000000
[ 3.168361] [drm] 16777216 byte draw area at offset 0x0
[ 3.168362] [drm] RAM header offset: 0x3ffe000
[ 3.168362] [drm] rom modes offset 0x488 for 128 modes
[ 3.180730] [TTM] Zone kernel: Available graphics memory: 508552 kiB
[ 3.180731] [TTM] Initializing pool allocator
[ 3.180735] [TTM] Initializing DMA pool allocator
[ 3.180742] [drm] qxl: 16M of VRAM memory size
[ 3.180743] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 3.180743] [drm] qxl: 64M of Surface memory size
[ 3.194516] RPC: Registered named UNIX socket transport module.
[ 3.194518] RPC: Registered udp transport module.
[ 3.194519] RPC: Registered tcp transport module.
[ 3.194519] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.231286] FS-Cache: Netfs 'nfs' registered for caching
[ 3.280673] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 3.315281] [drm] main mem slot 1 [f4000000,3ffe000]
[ 3.315283] [drm] surface mem slot 2 [f8000000,4000000]
[ 3.320159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.320161] [drm] No driver support for vblank timestamp query.
[ 3.320853] [drm] fb mappable at 0xF4000000, size 3145728
[ 3.320855] [drm] fb: depth 24, pitch 4096, width 1024, height 768
[ 3.320857] checking generic (f4000000 130000) vs hw (f4000000 1000000)
[ 3.320858] fb: switching to qxldrmfb from VESA VGA
[ 3.320874] Console: switching to colour dummy device 80x25
[ 3.333711] fbcon: qxldrmfb (fb0) is primary device
[ 3.333724] Console: switching to colour frame buffer device 128x48
[ 3.333734] qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[ 3.333736] qxl 0000:00:02.0: registered panic notifier
[ 3.333739] [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
[ 3.718614] init: avahi-cups-reload main process (793) terminated with status 1
[ 3.939374] ppdev: user-space parallel port driver
[ 4.048220] init: failsafe main process (838) killed by TERM signal
[ 4.104131] sound hdaudioC0D0: autoconfig: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
[ 4.104149] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.104151] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.104152] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.104153] sound hdaudioC0D0: inputs:
[ 4.104154] sound hdaudioC0D0: Line=0x5
[ 4.200342] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 4.759928] audit: type=1400 audit(1449515014.250:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1062 comm="apparmor_parser"
[ 4.759933] audit: type=1400 audit(1449515014.250:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1062 comm="apparmor_parser"
[ 5.596798] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 5.597664] NFSD: starting 90-second grace period (net ffffffff81cda040)
[ 6.222391] init: plymouth-upstart-bridge main process ended, respawning
[ 6.232735] init: plymouth-upstart-bridge main process ended, respawning
[ 7.428820] init: plymouth-stop pre-start process (1672) terminated with status 1
[ 11.282352] NFS: Registering the id_resolver key type
[ 11.282366] Key type id_resolver registered
[ 11.282368] Key type id_legacy registered
