Hi,
I've had problems with a btrfs filesystem on a usb disk. I made a
successfull backup of all data and created the filesystem from scratch.
I'm not able to restore all backuped data because of a kernel oops.
The problem is reproducible.
I've checked my RAM alreayd with memtest86 for 8h without any problems
found.
Could you be so kind to provide any information to solve the problem?
Thanks for you help.
Andreas
uname -a
========
Linux fatblock 4.12.0-0.bpo.2-amd64 #1 SMP Debian 4.12.13-1~bpo9+1
(2017-09-28) x86_64 GNU/Linux
btrfs --version
===============
btrfs-progs v4.9.1
btrfs fi df /mnt/archive/
=========================
Data, single: total=1.20TiB, used=1.20TiB
System, DUP: total=40.00MiB, used=160.00KiB
Metadata, DUP: total=3.50GiB, used=2.79GiB
GlobalReserve, single: total=512.00MiB, used=0.00B
smartctl -a /dev/sdf
====================
andi@fatblock:/etc/initramfs-tools$ sudo smartctl -a /dev/sdf
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.12.0-0.bpo.2-amd64] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST4000VN000-1H4168
Serial Number: Z300MKYZ
LU WWN Device Id: 5 000c50 063dd0357
Firmware Version: SC43
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Oct 25 14:03:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 117) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 517) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail
Always - 23673928
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 078 078 020 Old_age
Always - 23040
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail
Always - 218165830
9 Power_On_Hours 0x0032 059 059 000 Old_age
Always - 36667
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 31
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always
- 21475164165
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always
- 1479
190 Airflow_Temperature_Cel 0x0022 074 056 045 Old_age Always
- 26 (Min/Max 21/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 30
193 Load_Cycle_Count 0x0032 058 058 000 Old_age Always
- 85601
194 Temperature_Celsius 0x0022 026 044 000 Old_age Always
- 26 (0 20 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
dmesg
=====
[ 0.000000] microcode: microcode updated early to revision 0x22, date
= 2017-01-27
[ 0.000000] Linux version 4.12.0-0.bpo.2-amd64
(debian-ker...@lists.debian.org) (gcc version 6.3.0 20170516 (Debian
6.3.0-18) ) #1 SMP Debian 4.12.13-1~bpo9+1 (2017-09-28)
[ 0.000000] Command line:
BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-0.bpo.2-amd64
root=UUID=9208425d-8927-4ca1-83f6-a946adb13588 ro rootflags=subvol=@
cgroup_enable=memory swappaccount=1 pcie_aspm.policy=powersave
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832
bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6c80fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6c81000-0x00000000c6c87fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6c88000-0x00000000c70cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c70cb000-0x00000000c765bfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c765c000-0x00000000d8da7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8da8000-0x00000000d8e3efff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8e3f000-0x00000000d8e90fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8e91000-0x00000000d8fc7fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d8fc8000-0x00000000d9ffefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7823/H87M-G43 (MS-7823), BIOS V1.9 05/30/2015
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 011F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 011EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC-
WT
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped
at [ffff9dad800fd7d0]
[ 0.000000] Base memory trampoline at [ffff9dad80097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x20754000, 0x20754fff] PGTABLE
[ 0.000000] BRK [0x20755000, 0x20755fff] PGTABLE
[ 0.000000] BRK [0x20756000, 0x20756fff] PGTABLE
[ 0.000000] BRK [0x20757000, 0x20757fff] PGTABLE
[ 0.000000] BRK [0x20758000, 0x20758fff] PGTABLE
[ 0.000000] BRK [0x20759000, 0x20759fff] PGTABLE
[ 0.000000] BRK [0x2075a000, 0x2075afff] PGTABLE
[ 0.000000] BRK [0x2075b000, 0x2075bfff] PGTABLE
[ 0.000000] BRK [0x2075c000, 0x2075cfff] PGTABLE
[ 0.000000] BRK [0x2075d000, 0x2075dfff] PGTABLE
[ 0.000000] BRK [0x2075e000, 0x2075efff] PGTABLE
[ 0.000000] BRK [0x2075f000, 0x2075ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x345bb000-0x362d4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8F99080 000084 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8FA69E0 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8F991A0 00D839 (v02 ALASKA A M I
00000036 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000D8FC7F80 000040
[ 0.000000] ACPI: APIC 0x00000000D8FA6AF0 000092 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D8FA6B88 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D8FA6BD0 000539 (v01 PmRef Cpu0Ist
00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D8FA7110 000AD8 (v01 PmRef CpuPm
00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000D8FA7BE8 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D8FA7C28 000038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8FA7C60 00036D (v01 SataRe SataTabl
00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D8FA7FD0 003528 (v01 SaSsdt SaSsdt
00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 0x00000000D8FAB4F8 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x00000000D8FAB5A0 0000B8 (v01 INTEL HSW
00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000D8FAB658 000A26 (v01 Intel_ IsctTabl
00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11edfb000-0x11edfffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011edfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6c80fff]
[ 0.000000] node 0: [mem 0x00000000c6c88000-0x00000000c70cafff]
[ 0.000000] node 0: [mem 0x00000000c765c000-0x00000000d8da7fff]
[ 0.000000] node 0: [mem 0x00000000d8e3f000-0x00000000d8e90fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011edfffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000011edfffff]
[ 0.000000] On node 0 totalpages: 1013247
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13794 pages used for memmap
[ 0.000000] DMA32 zone: 882787 pages, LIFO batch:31
[ 0.000000] Normal zone: 1976 pages used for memmap
[ 0.000000] Normal zone: 126464 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at
0x00000000db200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6c81000-0xc6c87fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc70cb000-0xc765bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8da8000-0xd8e3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8e91000-0xd8fc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8fc8000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9dae9ea00000 s114840
r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s114840 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 997392
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-0.bpo.2-amd64
root=UUID=9208425d-8927-4ca1-83f6-a946adb13588 ro rootflags=subvol=@
cgroup_enable=memory swappaccount=1 pcie_aspm.policy=powersave
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3874576K/4052988K available (6485K kernel code,
1145K rwdata, 2908K rodata, 1468K init, 704K bss, 178412K reserved, 0K
cma-reserved)
[ 0.000000] ftrace: allocating 28157 entries in 110 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3399.816 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6799.63 BogoMIPS (lpj=13599264)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170303
[ 0.012103] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.012192] Security Framework initialized
[ 0.012247] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012309] AppArmor: AppArmor disabled by boot time parameter
[ 0.012495] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.013124] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.013462] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.013523] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes)
[ 0.013734] CPU: Physical Processor ID: 0
[ 0.013789] CPU: Processor Core ID: 0
[ 0.013845] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.013903] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.013964] mce: CPU supports 9 MCE banks
[ 0.014025] CPU0: Thermal monitoring enabled (TM1)
[ 0.014089] process: using mwait in idle threads
[ 0.014146] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.014204] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.014347] Freeing SMP alternatives memory: 24K
[ 0.016053] smpboot: Max logical packages: 2
[ 0.016110] DMAR: Host address width 39
[ 0.016164] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020017] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
c0000020660462 ecap f0101a
[ 0.020088] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.020146] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008020660462 ecap f010da
[ 0.020218] DMAR: RMRR base: 0x000000d9ea4000 end: 0x000000d9eb2fff
[ 0.020277] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.020336] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.020393] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.020450] DMAR-IR: Queued invalidation will be enabled to support
x2apic and Intr-remapping.
[ 0.020788] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.020845] x2apic enabled
[ 0.020899] Switched APIC routing to cluster x2apic.
[ 0.021368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061167] TSC deadline timer enabled
[ 0.061170] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz
(family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.061286] Performance Events: PEBS fmt2+, Haswell events, 16-deep
LBR, full-width counters, Intel PMU driver.
[ 0.062124] ... version: 3
[ 0.062178] ... bit width: 48
[ 0.062232] ... generic registers: 4
[ 0.062287] ... value mask: 0000ffffffffffff
[ 0.062343] ... max period: 00007fffffffffff
[ 0.062399] ... fixed-purpose events: 3
[ 0.062453] ... event mask: 000000070000000f
[ 0.062913] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.062995] smp: Bringing up secondary CPUs ...
[ 0.063104] x86: Booting SMP configuration:
[ 0.063158] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.620014] smp: Brought up 1 node, 8 CPUs
[ 0.620114] smpboot: Total of 8 processors activated (54404.80 BogoMIPS)
[ 0.624109] sched_clock: Marking stable (624000000, 0)->(626588257,
-2588257)
[ 0.624339] devtmpfs: initialized
[ 0.624429] x86/mm: Memory block size: 128MB
[ 0.625695] PM: Registering ACPI NVS region [mem
0xc6c81000-0xc6c87fff] (28672 bytes)
[ 0.625769] PM: Registering ACPI NVS region [mem
0xd8e91000-0xd8fc7fff] (1273856 bytes)
[ 0.625897] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.625981] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.626085] pinctrl core: initialized pinctrl subsystem
[ 0.626215] NET: Registered protocol family 16
[ 0.626390] cpuidle: using governor ladder
[ 0.626460] cpuidle: using governor menu
[ 0.626517] PCCT header not found.
[ 0.626597] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.626669] ACPI: bus type PCI registered
[ 0.626723] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.626825] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.626900] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.626962] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000]
with a huge-page mapping due to MTRR override.
[ 0.627082] PCI: Using configuration type 1 for base access
[ 0.627179] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.627858] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.627917] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.628130] ACPI: Added _OSI(Module Device)
[ 0.628186] ACPI: Added _OSI(Processor Device)
[ 0.628241] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.628297] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.628488] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.631523] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.632192] ACPI: Dynamic OEM Table Load:
[ 0.632251] ACPI: SSDT 0xFFFF9DAE9907C000 0003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20120711)
[ 0.632587] ACPI: Dynamic OEM Table Load:
[ 0.632645] ACPI: SSDT 0xFFFF9DAE9921B000 0005AA (v01 PmRef ApIst
00003000 INTL 20120711)
[ 0.633009] ACPI: Dynamic OEM Table Load:
[ 0.633067] ACPI: SSDT 0xFFFF9DAE9928E000 000119 (v01 PmRef ApCst
00003000 INTL 20120711)
[ 0.634425] ACPI: Interpreter enabled
[ 0.634500] ACPI: (supports S0 S3 S4 S5)
[ 0.634554] ACPI: Using IOAPIC for interrupt routing
[ 0.634627] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.641764] ACPI: Power Resource [FN00] (off)
[ 0.641871] ACPI: Power Resource [FN01] (off)
[ 0.641975] ACPI: Power Resource [FN02] (off)
[ 0.642076] ACPI: Power Resource [FN03] (off)
[ 0.642177] ACPI: Power Resource [FN04] (off)
[ 0.642728] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.642789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.643017] acpi PNP0A08:00: _OSC: platform does not support
[PCIeHotplug PME]
[ 0.643175] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.643234] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.643577] PCI host bridge to bus 0000:00
[ 0.643632] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.643691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.643750] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.643822] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff window]
[ 0.643894] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff window]
[ 0.643965] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff window]
[ 0.644038] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff window]
[ 0.644110] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff window]
[ 0.644182] pci_bus 0000:00: root bus resource [mem
0x000e4000-0x000e7fff window]
[ 0.644253] pci_bus 0000:00: root bus resource [mem
0xdf200000-0xfeafffff window]
[ 0.644325] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.644386] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
[ 0.644447] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000
[ 0.644454] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.644458] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.644460] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.644514] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.644519] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.644592] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.644606] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.644655] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.644683] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.644764] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.644778] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[ 0.644830] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.644884] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.644898] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[ 0.644967] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.645007] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.645087] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.645100] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.645157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.645189] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.645267] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.645327] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.645384] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.645465] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.645519] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.645570] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.645649] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.645702] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.645752] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.645833] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.645848] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.645917] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.645955] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.646034] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[ 0.646164] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.646174] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.646180] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.646186] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.646192] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.646197] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.646203] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.646232] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.646275] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.646287] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.646303] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.646404] acpiphp: Slot [1] registered
[ 0.646462] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.646577] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.646599] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.646625] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.646640] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff
64bit pref]
[ 0.646726] pci 0000:02:00.0: supports D1 D2
[ 0.646726] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.646765] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.656059] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.656117] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.656119] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.656123] pci 0000:00:1c.4: bridge window [mem
0xf0000000-0xf00fffff 64bit pref]
[ 0.656183] pci 0000:03:00.0: [dd01:0003] type 00 class 0x048000
[ 0.656214] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.656354] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.668057] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.668115] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.668660] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.668753] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.668843] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.668934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.669023] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.669128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.669232] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.669322] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.669619] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.669736] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.669795] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.669869] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.669925] vgaarb: loaded
[ 0.670000] EDAC MC: Ver: 3.0.0
[ 0.670127] PCI: Using ACPI for IRQ routing
[ 0.671326] PCI: pci_cache_line_size set to 64 bytes
[ 0.671358] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.671359] e820: reserve RAM buffer [mem 0xc6c81000-0xc7ffffff]
[ 0.671360] e820: reserve RAM buffer [mem 0xc70cb000-0xc7ffffff]
[ 0.671360] e820: reserve RAM buffer [mem 0xd8da8000-0xdbffffff]
[ 0.671361] e820: reserve RAM buffer [mem 0xd8e91000-0xdbffffff]
[ 0.671362] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.671362] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff]
[ 0.671463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.671524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.673597] clocksource: Switched to clocksource hpet
[ 0.679243] VFS: Disk quotas dquot_6.6.0
[ 0.679309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.679412] pnp: PnP ACPI init
[ 0.679511] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.679572] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.679691] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.679749] system 00:01: [io 0xffff] has been reserved
[ 0.679806] system 00:01: [io 0xffff] has been reserved
[ 0.679863] system 00:01: [io 0xffff] has been reserved
[ 0.679919] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.679976] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.680034] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.680091] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.680149] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.680207] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.680265] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.680278] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.680308] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.680366] system 00:03: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.680437] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.680494] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.680552] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.680653] pnp 00:05: [dma 0 disabled]
[ 0.680679] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.680835] pnp 00:06: [dma 0 disabled]
[ 0.680890] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.680919] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.680979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.681253] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.681312] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.681371] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.681430] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.681489] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.681549] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.681617] system 00:08: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.681676] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.681734] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.681793] system 00:08: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.681852] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.681910] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.681970] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.682115] pnp: PnP ACPI: found 9 devices
[ 0.687863] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.687947] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to
[bus 01] add_size 1000
[ 0.687949] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align
100000
[ 0.687950] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.687965] pci 0000:00:1c.0: BAR 14: assigned [mem
0xdf200000-0xdf3fffff]
[ 0.688028] pci 0000:00:1c.0: BAR 15: assigned [mem
0xdf400000-0xdf5fffff 64bit pref]
[ 0.688101] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.688159] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.688215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.688275] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.688335] pci 0000:00:1c.0: bridge window [mem
0xdf400000-0xdf5fffff 64bit pref]
[ 0.688411] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.688467] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.688526] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.688587] pci 0000:00:1c.4: bridge window [mem
0xf0000000-0xf00fffff 64bit pref]
[ 0.688662] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.688721] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.688784] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.688785] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.688785] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.688786] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff
window]
[ 0.688787] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff
window]
[ 0.688787] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff
window]
[ 0.688788] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff
window]
[ 0.688788] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff
window]
[ 0.688789] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff
window]
[ 0.688790] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff
window]
[ 0.688790] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.688791] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.688792] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff
64bit pref]
[ 0.688792] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.688793] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.688794] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff
64bit pref]
[ 0.688794] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.688867] NET: Registered protocol family 2
[ 0.689018] TCP established hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.689880] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.690009] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.690091] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.690159] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.690258] NET: Registered protocol family 1
[ 0.690320] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.690720] PCI: CLS 64 bytes, default 64
[ 0.690743] Unpacking initramfs...
[ 1.028870] Freeing initrd memory: 29800K
[ 1.028965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.029025] software IO TLB [mem 0xd4da8000-0xd8da8000] (64MB) mapped
at [ffff9dae54da8000-ffff9dae58da7fff]
[ 1.029421] audit: initializing netlink subsys (disabled)
[ 1.029527] audit: type=2000 audit(1508909884.027:1):
state=initialized audit_enabled=0 res=1
[ 1.029769] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.029887] zbud: loaded
[ 1.245581] Key type asymmetric registered
[ 1.245643] Asymmetric key parser 'x509' registered
[ 1.245708] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 1.245804] io scheduler noop registered
[ 1.245859] io scheduler deadline registered
[ 1.245919] io scheduler cfq registered (default)
[ 1.245975] io scheduler mq-deadline registered
[ 1.246400] intel_idle: MWAIT substates: 0x42120
[ 1.246401] intel_idle: v0.4.1 model 0x3C
[ 1.246604] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.246732] GHES: HEST is not enabled!
[ 1.246826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.267290] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 1.267621] Linux agpgart interface v0.103
[ 1.267722] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 1.267780] AMD IOMMUv2 functionality not available on this system
[ 1.268258] i8042: PNP: No PS/2 controller found.
[ 1.268353] mousedev: PS/2 mouse device common for all mice
[ 1.268432] rtc_cmos 00:02: RTC can wake from S4
[ 1.268582] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.268664] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 1.268743] intel_pstate: Intel P-state driver initializing
[ 1.269211] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.270308] NET: Registered protocol family 10
[ 1.270860] Segment Routing with IPv6
[ 1.270977] mip6: Mobile IPv6
[ 1.271061] NET: Registered protocol family 17
[ 1.271151] mpls_gso: MPLS GSO support
[ 1.272384] microcode: sig=0x306c3, pf=0x2, revision=0x22
[ 1.272779] microcode: Microcode Update Driver: v2.2.
[ 1.273222] registered taskstats version 1
[ 1.273439] zswap: loaded using pool lzo/zbud
[ 1.273807] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.274765] rtc_cmos 00:02: setting system clock to 2017-10-25
05:38:05 UTC (1508909885)
[ 1.275005] PM: Hibernation image not present or could not be loaded.
[ 1.278313] Freeing unused kernel memory: 1468K
[ 1.278402] Write protecting the kernel read-only data: 12288k
[ 1.279576] Freeing unused kernel memory: 1692K
[ 1.282963] Freeing unused kernel memory: 1188K
[ 1.283817] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.292098] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.292226] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.292296] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.292368] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.292767] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.292855] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.293776] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.293880] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.293980] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.294077] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.307606] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.307695] ACPI: Power Button [PWRB]
[ 1.307795] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.307881] ACPI: Power Button [PWRF]
[ 1.310186] wmi: Mapper loaded
[ 1.314358] (NULL device *): hwmon_device_register() is deprecated.
Please convert the driver to use hwmon_device_register_with_info().
[ 1.314573] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.314642] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.314994] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.315065] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.315564] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.315633] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have
ASPM control
[ 1.315863] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.315954] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.316158] ACPI: bus type USB registered
[ 1.316251] usbcore: registered new interface driver usbfs
[ 1.316338] usbcore: registered new interface driver hub
[ 1.316435] usbcore: registered new device driver usb
[ 1.316904] SCSI subsystem initialized
[ 1.317125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.317672] ehci-pci: EHCI PCI platform driver
[ 1.317826] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.317899] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.317984] ehci-pci 0000:00:1a.0: debug port 2
[ 1.319584] AVX2 version of gcm_enc/dec engaged.
[ 1.319677] AES CTR mode by8 optimization enabled
[ 1.321940] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.321963] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
[ 1.322068] libata version 3.00 loaded.
[ 1.326542] r8169 0000:02:00.0 eth0: RTL8168g/8111g at
0xffffbf5200659000, d4:3d:7e:da:35:2c, XID 0c000800 IRQ 26
[ 1.326635] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 1.337659] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.338019] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.338092] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.338166] usb usb1: Product: EHCI Host Controller
[ 1.338224] usb usb1: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 ehci_hcd
[ 1.338285] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.338541] hub 1-0:1.0: USB hub found
[ 1.338637] hub 1-0:1.0: 2 ports detected
[ 1.339102] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.339164] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 1.339247] ehci-pci 0000:00:1d.0: debug port 2
[ 1.343208] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.343219] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 1.357714] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.357831] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.357896] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.357975] usb usb2: Product: EHCI Host Controller
[ 1.358036] usb usb2: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 ehci_hcd
[ 1.358100] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.358381] hub 2-0:1.0: USB hub found
[ 1.358445] hub 2-0:1.0: 2 ports detected
[ 1.358817] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.358890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 3
[ 1.360064] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x100 quirks 0x00009810
[ 1.360155] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.360267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.360335] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.360417] usb usb3: Product: xHCI Host Controller
[ 1.360480] usb usb3: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 xhci-hcd
[ 1.360547] usb usb3: SerialNumber: 0000:00:14.0
[ 1.360805] hub 3-0:1.0: USB hub found
[ 1.360885] hub 3-0:1.0: 14 ports detected
[ 1.363154] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.363222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 4
[ 1.363342] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.363409] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.363491] usb usb4: Product: xHCI Host Controller
[ 1.363553] usb usb4: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 xhci-hcd
[ 1.363620] usb usb4: SerialNumber: 0000:00:14.0
[ 1.363889] hub 4-0:1.0: USB hub found
[ 1.363966] hub 4-0:1.0: 6 ports detected
[ 1.364588] ahci 0000:00:1f.2: version 3.0
[ 1.364841] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x3d impl SATA mode
[ 1.364928] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
part ems apst
[ 1.411354] scsi host0: ahci
[ 1.411801] scsi host1: ahci
[ 1.412207] scsi host2: ahci
[ 1.412623] scsi host3: ahci
[ 1.412938] scsi host4: ahci
[ 1.413205] scsi host5: ahci
[ 1.413342] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port
0xf7e1a100 irq 28
[ 1.413452] ata2: DUMMY
[ 1.413524] ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port
0xf7e1a200 irq 28
[ 1.413630] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port
0xf7e1a280 irq 28
[ 1.413750] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port
0xf7e1a300 irq 28
[ 1.413854] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port
0xf7e1a380 irq 28
[ 1.414496] [drm] Memory usable by graphics device = 2048M
[ 1.414581] [drm] Replacing VGA console driver
[ 1.415471] Console: switching to colour dummy device 80x25
[ 1.422280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.422288] [drm] Driver supports precise vblank timestamp query.
[ 1.425041] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.432259] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on
minor 0
[ 1.434877] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 1.435786] acpi device:62: registered as cooling_device13
[ 1.435914] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.533225] fbcon: inteldrmfb (fb0) is primary device
[ 1.603498] Console: switching to colour frame buffer device 128x48
[ 1.623924] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.665764] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.685762] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.689949] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.711288] usb 4-1: New USB device found, idVendor=174c, idProduct=5106
[ 1.711354] usb 4-1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 1.711409] usb 4-1: Product: AS2105
[ 1.711439] usb 4-1: Manufacturer: ASMedia
[ 1.711473] usb 4-1: SerialNumber: Z300MKYZ
[ 1.715264] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1.715546] scsi host6: usb-storage 4-1:1.0
[ 1.715698] usbcore: registered new interface driver usb-storage
[ 1.716317] usbcore: registered new interface driver uas
[ 1.729508] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.729594] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.729651] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.729749] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.729804] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.731284] ata5.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133
[ 1.731354] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.731449] ata1.00: supports DRM functions and may not be fully
accessible
[ 1.731502] ata3.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133
[ 1.732683] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.733926] ata4.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133
[ 1.736150] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.738467] ata6.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133
[ 1.739563] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.740692] ata1.00: NCQ Send/Recv Log not supported
[ 1.741558] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max
UDMA/133
[ 1.742391] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 1.743634] ata1.00: supports DRM functions and may not be fully
accessible
[ 1.744370] ata5.00: configured for UDMA/133
[ 1.745099] ata3.00: configured for UDMA/133
[ 1.745895] ata4.00: configured for UDMA/133
[ 1.746745] ata1.00: NCQ Send/Recv Log not supported
[ 1.747468] ata6.00: configured for UDMA/133
[ 1.748115] ata1.00: configured for UDMA/133
[ 1.748795] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850
1B6Q PQ: 0 ANSI: 5
[ 1.786119] scsi 2:0:0:0: Direct-Access ATA ST4000VN000-2AH1
SC60 PQ: 0 ANSI: 5
[ 1.814182] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.814749] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.815524] hub 1-1:1.0: USB hub found
[ 1.816122] hub 1-1:1.0: 6 ports detected
[ 1.822099] scsi 3:0:0:0: Direct-Access ATA ST4000VN000-2AH1
SC60 PQ: 0 ANSI: 5
[ 1.829747] usb 3-5: new high-speed USB device number 2 using xhci_hcd
[ 1.838146] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.838804] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 1.839788] hub 2-1:1.0: USB hub found
[ 1.840521] hub 2-1:1.0: 8 ports detected
[ 1.858252] scsi 4:0:0:0: Direct-Access ATA ST4000VN000-2AH1
SC60 PQ: 0 ANSI: 5
[ 1.902245] scsi 5:0:0:0: Direct-Access ATA ST4000VN000-2AH1
SC60 PQ: 0 ANSI: 5
[ 1.945262] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 1.945276] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 1.945279] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.945287] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/233 GiB)
[ 1.945298] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.945301] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.945306] sd 0:0:0:0: [sda] Write Protect is off
[ 1.945308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.945328] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.945337] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 1.945338] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 1.945354] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.945361] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.945364] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.945408] sd 4:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.945417] sd 5:0:0:0: [sde] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 1.945419] sd 5:0:0:0: [sde] 4096-byte physical blocks
[ 1.945442] sd 5:0:0:0: [sde] Write Protect is off
[ 1.945445] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.945483] sd 5:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.947552] sda: sda1 sda2 sda3
[ 1.948134] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.954787] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.955246] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.955686] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.955691] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.969990] usb 3-5: New USB device found, idVendor=1a40, idProduct=0101
[ 1.970491] usb 3-5: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.970983] usb 3-5: Product: USB 2.0 Hub
[ 1.971849] hub 3-5:1.0: USB hub found
[ 1.972346] hub 3-5:1.0: 4 ports detected
[ 1.998772] sdc: sdc1
[ 1.999946] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.001103] sdd: sdd1
[ 2.001145] sde: sde1
[ 2.001596] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.003237] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.015202] sdb: sdb1
[ 2.016264] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.027569] random: fast init done
[ 2.045728] tsc: Refined TSC clocksource calibration: 3399.997 MHz
[ 2.046176] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x31024bd20a6, max_idle_ns: 440795346804 ns
[ 2.089713] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.110323] usb 4-2: New USB device found, idVendor=174c, idProduct=55aa
[ 2.110822] usb 4-2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 2.111314] usb 4-2: Product: ICY BOX IB-366StU3+B
[ 2.111767] usb 4-2: Manufacturer: ICY BOX
[ 2.112200] usb 4-2: SerialNumber: 123456789012
[ 2.113206] usb 4-2: UAS is blacklisted for this device, using
usb-storage instead
[ 2.113713] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 2.114291] usb-storage 4-2:1.0: Quirks match for vid 174c pid 55aa:
400000
[ 2.114783] scsi host7: usb-storage 4-2:1.0
[ 2.209692] raid6: sse2x1 gen() 11397 MB/s
[ 2.229697] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 2.277703] raid6: sse2x1 xor() 8990 MB/s
[ 2.345708] raid6: sse2x2 gen() 15314 MB/s
[ 2.371613] usb 3-6: New USB device found, idVendor=03eb, idProduct=204b
[ 2.372063] usb 3-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.372516] usb 3-6: Product: CUL868
[ 2.372957] usb 3-6: Manufacturer: busware.de
[ 2.413712] raid6: sse2x2 xor() 10270 MB/s
[ 2.469722] usb 3-5.1: new full-speed USB device number 4 using xhci_hcd
[ 2.481716] raid6: sse2x4 gen() 17531 MB/s
[ 2.549718] raid6: sse2x4 xor() 12342 MB/s
[ 2.591436] usb 3-5.1: New USB device found, idVendor=10c4,
idProduct=ea60
[ 2.591876] usb 3-5.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.592313] usb 3-5.1: Product: CP2104 USB to UART Bridge Controller
[ 2.592751] usb 3-5.1: Manufacturer: Silicon Labs
[ 2.593185] usb 3-5.1: SerialNumber: 0079E5E9
[ 2.617720] raid6: avx2x1 gen() 23365 MB/s
[ 2.685725] raid6: avx2x1 xor() 17266 MB/s
[ 2.709733] usb 3-14: new low-speed USB device number 5 using xhci_hcd
[ 2.753730] raid6: avx2x2 gen() 27424 MB/s
[ 2.821735] raid6: avx2x2 xor() 18620 MB/s
[ 2.868017] usb 3-14: New USB device found, idVendor=04f2, idProduct=0402
[ 2.868440] usb 3-14: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.868856] usb 3-14: Product: USB Keyboard
[ 2.869270] usb 3-14: Manufacturer: Chicony
[ 2.871799] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.889732] raid6: avx2x4 gen() 30856 MB/s
[ 2.896436] usbcore: registered new interface driver usbhid
[ 2.897230] usbhid: USB HID core driver
[ 2.898575] input: Chicony USB Keyboard as
/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:04F2:0402.0001/input/input3
[ 2.949749] usb 3-5.2: new full-speed USB device number 6 using xhci_hcd
[ 2.957742] raid6: avx2x4 xor() 21374 MB/s
[ 2.957862] hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID
v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-14/input0
[ 2.957967] input: Chicony USB Keyboard as
/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:04F2:0402.0002/input/input4
[ 2.960146] raid6: using algorithm avx2x4 gen() 30856 MB/s
[ 2.960631] raid6: .... xor() 21374 MB/s, rmw enabled
[ 2.961113] raid6: using avx2x2 recovery algorithm
[ 2.961747] xor: automatically using best checksumming function avx
[ 2.961856] scsi 6:0:0:0: Direct-Access ST4000VN 000-1H4168
SC43 PQ: 0 ANSI: 5
[ 2.962460] sd 6:0:0:0: [sdf] Very big device. Trying to use READ
CAPACITY(16).
[ 2.962580] sd 6:0:0:0: [sdf] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 2.962779] sd 6:0:0:0: [sdf] Write Protect is off
[ 2.962779] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 2.962979] sd 6:0:0:0: [sdf] No Caching mode page found
[ 2.962979] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 2.963235] sd 6:0:0:0: [sdf] Very big device. Trying to use READ
CAPACITY(16).
[ 2.966280] async_tx: api initialized (async)
[ 2.967778] md/raid:md1: device sdd1 operational as raid disk 2
[ 2.968298] md/raid:md1: device sde1 operational as raid disk 0
[ 2.968808] md/raid:md1: device sdc1 operational as raid disk 3
[ 2.969311] md/raid:md1: device sdb1 operational as raid disk 1
[ 2.970023] md/raid:md1: raid level 5 active with 4 out of 4 devices,
algorithm 2
[ 2.990152] sdf: sdf1
[ 2.991515] sd 6:0:0:0: [sdf] Very big device. Trying to use READ
CAPACITY(16).
[ 2.993377] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 2.995952] md1: detected capacity change from 0 to 12001954234368
[ 3.017896] hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1:
USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-14/input1
[ 3.070027] clocksource: Switched to clocksource tsc
[ 3.072781] usb 3-5.2: New USB device found, idVendor=10c4,
idProduct=ea60
[ 3.073691] usb 3-5.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.074607] usb 3-5.2: Product: CP2104 USB to UART Bridge Controller
[ 3.075512] usb 3-5.2: Manufacturer: Silicon Labs
[ 3.076421] usb 3-5.2: SerialNumber: 0079E4D7
[ 3.083055] device-mapper: uevent: version 1.0.3
[ 3.083671] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-de...@redhat.com
[ 3.134293] scsi 7:0:0:0: Direct-Access ICY BOX IB-366StU3+B
0 PQ: 0 ANSI: 6
[ 3.135256] sd 7:0:0:0: [sdg] 15628053168 512-byte logical blocks:
(8.00 TB/7.28 TiB)
[ 3.135907] sd 7:0:0:0: [sdg] 4096-byte physical blocks
[ 3.136683] sd 7:0:0:0: [sdg] Write Protect is off
[ 3.137212] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 3.137409] sd 7:0:0:0: [sdg] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.138893] random: crng init done
[ 3.166444] sdg: sdg1
[ 3.167846] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 3.241972] VFIO - User Level meta-driver version: 0.3
[ 3.259027] Btrfs loaded, crc32c=crc32c-intel
[ 3.355038] BTRFS: device fsid 630137c3-6dd8-416c-b730-f47f99f2701d
devid 1 transid 4833 /dev/sdg1
[ 3.355966] BTRFS: device label backup devid 1 transid 1611 /dev/sdf1
[ 3.356572] BTRFS: device fsid 9208425d-8927-4ca1-83f6-a946adb13588
devid 1 transid 2013825 /dev/sda2
[ 34.320773] BTRFS info (device sda2): disk space caching is enabled
[ 34.323048] BTRFS info (device sda2): bdev /dev/sda2 errs: wr 0, rd
0, flush 0, corrupt 14, gen 0
[ 34.374291] BTRFS info (device sda2): detected SSD devices, enabling
SSD mode
[ 34.533779] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 34.539611] systemd[1]: systemd 232 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 34.541571] systemd[1]: Detected architecture x86-64.
[ 34.542921] systemd[1]: Set hostname to <fatblock>.
[ 34.619773] systemd[1]: Created slice User and Session Slice.
[ 34.620240] systemd[1]: Listening on Journal Audit Socket.
[ 34.620677] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 34.621425] systemd[1]: Listening on LVM2 poll daemon socket.
[ 34.622267] systemd[1]: Listening on udev Control Socket.
[ 34.623169] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 34.624114] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 34.638473] BTRFS info (device sda2): disk space caching is enabled
[ 34.641356] loop: module loaded
[ 34.684689] systemd-journald[719]: Received request to flush runtime
journal from PID 1
[ 34.711403] parport_pc 00:06: reported by Plug and Play ACPI
[ 34.712019] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 34.724858] EDAC ie31200: No ECC support
[ 34.730477] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.731976] cdc_acm 3-6:1.0: ttyACM0: USB ACM device
[ 34.732909] usbcore: registered new interface driver cdc_acm
[ 34.733613] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 34.734798] usbcore: registered new interface driver usbserial
[ 34.734837] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 34.736233] usbcore: registered new interface driver usbserial_generic
[ 34.737052] usbserial: USB Serial support registered for generic
[ 34.739205] dvb_core: loading out-of-tree module taints kernel.
[ 34.740314] usbcore: registered new interface driver cp210x
[ 34.741348] usbserial: USB Serial support registered for cp210x
[ 34.741383] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.741436] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 34.741462] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 34.741489] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 34.741515] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 34.741786] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 34.741817] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 34.747092] cp210x 3-5.1:1.0: cp210x converter detected
[ 34.748047] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters,
655360 ms ovfl timer
[ 34.748756] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 34.749336] usb 3-5.1: cp210x converter now attached to ttyUSB0
[ 34.749358] cp210x 3-5.2:1.0: cp210x converter detected
[ 34.750412] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 34.750876] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 34.751056] usb 3-5.2: cp210x converter now attached to ttyUSB1
[ 34.751850] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 34.771571] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 34.772236] ACPI Warning: SystemIO range
0x0000000000001828-0x000000000000182F conflicts with OpRegion
0x0000000000001800-0x000000000000187F (\PMIO) (20170303/utaddress-247)
[ 34.773623] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 34.774281] ACPI Warning: SystemIO range
0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 34.775529] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 34.776640] ACPI Warning: SystemIO range
0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion
0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
[ 34.778244] ACPI Warning: SystemIO range
0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 34.779834] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 34.780890] ACPI Warning: SystemIO range
0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion
0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247)
[ 34.783028] ACPI Warning: SystemIO range
0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion
0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247)
[ 34.785246] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 34.786390] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 34.800550] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 34.801094] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892:
line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 34.801096] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 34.801097] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 34.801097] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 34.801098] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 34.801099] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 34.801100] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 34.801101] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 34.801102] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 34.809322] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 34.809419] Digital Devices PCIE bridge driver 0.9.32, Copyright (C)
2010-17 Digital Devices GmbH
[ 34.809626] ddbridge 0000:03:00.0: device name: Digital Devices Cine
S2 V6.5 DVB adapter
[ 34.809657] ddbridge 0000:03:00.0: HW 0001000d REGMAP 00010004
[ 34.809675] ddbridge 0000:03:00.0: link 0 vendor dd01 device 0003
subvendor dd01 subdevice 0021
[ 34.813864] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 34.814675] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 34.814703] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 34.814731] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 34.814757] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 34.814785] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 34.814812] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 34.814840] input: HDA Intel PCH Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 34.814850] input: HDA Intel HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 34.814867] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 34.814938] input: HDA Intel HDMI HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 34.830278] intel_rapl: Found RAPL domain package
[ 34.830279] intel_rapl: Found RAPL domain core
[ 34.830280] intel_rapl: Found RAPL domain uncore
[ 34.830280] intel_rapl: Found RAPL domain dram
[ 34.831535] ppdev: user-space parallel port driver
[ 34.842490] iTCO_vendor_support: vendor-support=0
[ 34.844431] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 34.844466] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 34.844528] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 35.576751] EXT4-fs (dm-0): mounted filesystem with ordered data
mode. Opts: user_xattr
[ 35.593313] EXT4-fs (dm-1): mounted filesystem with ordered data
mode. Opts: user_xattr
[ 36.289534] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB
1): DUAL DVB-S2
[ 36.290028] ddbridge 0000:03:00.0: init link 0, input 0, regs 00000200
[ 36.290515] ddbridge 0000:03:00.0: init link 0, input 0, handler 8
[ 36.290991] ddbridge 0000:03:00.0: init link 0, io 0, dma 0, dmaregs
00000300 bufregs 00002000
[ 36.291459] ddbridge 0000:03:00.0: init link 0, input 1, regs 00000210
[ 36.291927] ddbridge 0000:03:00.0: init link 0, input 1, handler 9
[ 36.292007] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 36.293048] ddbridge 0000:03:00.0: init link 0, io 1, dma 1, dmaregs
00000310 bufregs 00002100
[ 36.293525] ddbridge 0000:03:00.0: init link 0, output 0, regs 00000280
[ 36.293993] ddbridge 0000:03:00.0: init link 0, io 0, dma 0, dmaregs
00000380 bufregs 00002800
[ 36.295540] ddbridge 0000:03:00.0: Port 1: Link 0, Link Port 1 (TAB
2): NO MODULE
[ 36.296563] ddbridge 0000:03:00.0: Port 2: Link 0, Link Port 2 (TAB
3): NO MODULE
[ 36.297557] ddbridge 0000:03:00.0: Port 3: Link 0, Link Port 3 (TAB
4): NO MODULE
[ 36.297661] ddbridge 0000:03:00.0: 0 netstream channels
[ 36.297662] DVB: registering new adapter (DDBridge)
[ 36.297663] DVB: registering new adapter (DDBridge)
[ 36.309773] r8169 0000:02:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168g-2.fw
[ 36.354101] r8169 0000:02:00.0 eth0: link down
[ 36.354101] r8169 0000:02:00.0 eth0: link down
[ 36.354164] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.483584] stv090x_attach: Attaching STV0900 demodulator(1) Cut=0x30
[ 36.484389] STV0900 version 0x30
[ 36.489245] LNBx2x attached on addr=a
[ 36.492113] stv6110x_attach: Attaching STV6110x
[ 36.492945] ddbridge 0000:03:00.0: attach tuner input 0 adr 60
[ 36.493767] ddbridge 0000:03:00.0: DVB: registering adapter 0
frontend 0 (STV090x Multistandard)...
[ 36.535580] stv090x_attach: Attaching STV0900 demodulator(2) Cut=0x30
[ 36.536389] STV0900 version 0x30
[ 36.537478] LNBx2x attached on addr=8
[ 36.538280] stv6110x_attach: Attaching STV6110x
[ 36.539069] ddbridge 0000:03:00.0: attach tuner input 1 adr 63
[ 36.539990] ddbridge 0000:03:00.0: DVB: registering adapter 1
frontend 0 (STV090x Multistandard)...
[ 36.576840] 8021q: 802.1Q VLAN Support v1.8
[ 36.587148] IPv6: ADDRCONF(NETDEV_UP): eth0.20: link is not ready
[ 36.596388] bridge: filtering via arp/ip/ip6tables is no longer
available by default. Update your scripts to load br_netfilter if you
need this.
[ 36.600029] vlan20: port 1(eth0.20) entered blocking state
[ 36.600662] vlan20: port 1(eth0.20) entered disabled state
[ 36.601324] device eth0.20 entered promiscuous mode
[ 36.601956] device eth0 entered promiscuous mode
[ 36.604725] IPv6: ADDRCONF(NETDEV_UP): vlan20: link is not ready
[ 36.615671] IPv6: ADDRCONF(NETDEV_UP): eth0.40: link is not ready
[ 36.620475] br1: port 1(eth0.40) entered blocking state
[ 36.621212] br1: port 1(eth0.40) entered disabled state
[ 36.622055] device eth0.40 entered promiscuous mode
[ 36.624417] IPv6: ADDRCONF(NETDEV_UP): br1: link is not ready
[ 36.634231] br0: port 1(eth0) entered blocking state
[ 36.634782] br0: port 1(eth0) entered disabled state
[ 36.636961] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 38.864930] r8169 0000:02:00.0 eth0: link up
[ 38.866719] br0: port 1(eth0) entered blocking state
[ 38.868297] br0: port 1(eth0) entered forwarding state
[ 38.870096] vlan20: port 1(eth0.20) entered blocking state
[ 38.871651] vlan20: port 1(eth0.20) entered listening state
[ 38.873390] br1: port 1(eth0.40) entered blocking state
[ 38.874878] br1: port 1(eth0.40) entered listening state
[ 38.876390] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 53.984506] br1: port 1(eth0.40) entered learning state
[ 53.986476] vlan20: port 1(eth0.20) entered learning state
[ 69.089310] vlan20: port 1(eth0.20) entered forwarding state
[ 69.093249] vlan20: topology change detected, propagating
[ 69.095242] br1: port 1(eth0.40) entered forwarding state
[ 69.097249] br1: topology change detected, propagating
[ 69.099302] IPv6: ADDRCONF(NETDEV_CHANGE): vlan20: link becomes ready
[ 69.101362] IPv6: ADDRCONF(NETDEV_CHANGE): br1: link becomes ready
[ 126.759572] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 126.774129] Ebtables v2.0 registered
[ 1893.789841] Bluetooth: Core ver 2.22
[ 1893.789873] NET: Registered protocol family 31
[ 1893.789885] Bluetooth: HCI device and connection manager initialized
[ 1893.789903] Bluetooth: HCI socket layer initialized
[ 1893.789916] Bluetooth: L2CAP socket layer initialized
[ 1893.789932] Bluetooth: SCO socket layer initialized
[ 2012.818753] BTRFS info (device sdf1): disk space caching is enabled
[ 2012.818833] BTRFS info (device sdf1): has skinny extents
[ 6526.725676] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 6526.725703] IP: __list_del_entry_valid+0x0/0x90
[ 6526.725714] PGD 0
[ 6526.725715] P4D 0
[ 6526.725732] Oops: 0000 [#1] SMP
[ 6526.725741] Modules linked in: bluetooth ecdh_generic rfkill msr
ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter
binfmt_misc cpufreq_userspace cpufreq_powersave cpufreq_conservative
bridge 8021q garp mrp stp llc stv6110x(O) lnbp21(O) stv090x(O) nct6775
hwmon_vid ext4 crc16 jbd2 fscrypto ecb mbcache iTCO_wdt
iTCO_vendor_support ppdev intel_rapl x86_pkg_temp_thermal
intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel ddbridge(O) intel_cstate snd_hda_codec_realtek
snd_hda_codec_hdmi cxd2099(O) intel_uncore lpc_ich snd_hda_codec_generic
pcspkr intel_rapl_perf dvb_core(O) sg mfd_core cp210x usbserial
snd_hda_intel cdc_acm snd_hda_codec shpchp snd_hda_core snd_hwdep
snd_pcm snd_timer snd ie31200_edac soundcore mei_me mei battery
parport_pc parport tpm_infineon
[ 6526.725896] evdev intel_smartconnect eeprom coretemp loop ip_tables
x_tables autofs4 btrfs raid10 raid1 raid0 multipath linear vfio_pci
irqbypass vfio_virqfd vfio_iommu_type1 vfio dm_mod raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx xor
hid_generic usbhid hid raid6_pq libcrc32c crc32c_generic md_mod sd_mod
uas usb_storage crc32c_intel mxm_wmi ahci libahci i915 aesni_intel
aes_x86_64 crypto_simd cryptd i2c_algo_bit glue_helper xhci_pci ehci_pci
libata drm_kms_helper xhci_hcd ehci_hcd scsi_mod i2c_i801 r8169 mii
usbcore drm usb_common fan thermal wmi video button
[ 6526.726013] CPU: 0 PID: 5763 Comm: rsync Tainted: G O
4.12.0-0.bpo.2-amd64 #1 Debian 4.12.13-1~bpo9+1
[ 6526.726034] Hardware name: MSI MS-7823/H87M-G43 (MS-7823), BIOS V1.9
05/30/2015
[ 6526.726049] task: ffff9dae191d6080 task.stack: ffffbf52032a4000
[ 6526.726063] RIP: 0010:__list_del_entry_valid+0x0/0x90
[ 6526.726074] RSP: 0018:ffffbf52032a77e0 EFLAGS: 00010206
[ 6526.726087] RAX: 0000000000000093 RBX: 0000000000000015 RCX:
ffff9dae191d6080
[ 6526.726102] RDX: 0000000000000000 RSI: 0000000000000200 RDI:
0000000000000000
[ 6526.726117] RBP: ffffffffc0783bc8 R08: 0000000000000008 R09:
ffffffff88715fc0
[ 6526.726132] R10: ffffffff88715f80 R11: 0000000000000000 R12:
ffffffffc0783720
[ 6526.726147] R13: ffffffffc0783bb8 R14: 0000000000000008 R15:
ffffffffc0783bd8
[ 6526.726162] FS: 00007f9c6ac05e80(0000) GS:ffff9dae9ea00000(0000)
knlGS:0000000000000000
[ 6526.726178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6526.726191] CR2: 0000000000000000 CR3: 00000000991d8000 CR4:
00000000001406f0
[ 6526.726206] Call Trace:
[ 6526.726233] ? find_workspace+0x1de/0x240 [btrfs]
[ 6526.726254] ? btrfs_get_token_64+0x103/0x120 [btrfs]
[ 6526.726274] ? btrfs_decompress+0x2a/0x70 [btrfs]
[ 6526.726294] ? uncompress_inline.isra.59+0xdf/0x139 [btrfs]
[ 6526.726315] ? btrfs_get_extent+0x875/0xbf0 [btrfs]
[ 6526.726899] ? __set_extent_bit+0x3fb/0x590 [btrfs]
[ 6526.727463] ? __do_readpage+0x1a9/0x800 [btrfs]
[ 6526.728026] ? btrfs_releasepage+0x20/0x20 [btrfs]
[ 6526.728588] ? __extent_readpages.constprop.51+0x2ea/0x320 [btrfs]
[ 6526.729171] ? btrfs_releasepage+0x20/0x20 [btrfs]
[ 6526.729754] ? extent_readpages+0x1de/0x200 [btrfs]
[ 6526.730334] ? btrfs_releasepage+0x20/0x20 [btrfs]
[ 6526.730887] ? __alloc_pages_nodemask+0xe1/0x240
[ 6526.731459] ? alloc_pages_current+0x91/0x140
[ 6526.732025] ? __do_page_cache_readahead+0x1fe/0x2d0
[ 6526.732590] ? ondemand_readahead+0x171/0x290
[ 6526.733151] ? ondemand_readahead+0x171/0x290
[ 6526.733705] ? pagecache_get_page+0x30/0x220
[ 6526.734257] ? generic_file_read_iter+0x81c/0x950
[ 6526.734832] ? cp_new_stat+0x150/0x180
[ 6526.735390] ? new_sync_read+0xd7/0x120
[ 6526.735946] ? vfs_read+0x91/0x130
[ 6526.736482] ? SyS_read+0x52/0xc0
[ 6526.737010] ? system_call_fast_compare_end+0xc/0x97
[ 6526.737527] Code: e8 1c 7a e1 ff 0f 0b 48 89 f2 48 89 c1 48 89 fe 48
c7 c7 78 10 43 88 e8 05 7a e1 ff 0f 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00
00 00 <48> 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 39 c8 74
[ 6526.738592] RIP: __list_del_entry_valid+0x0/0x90 RSP: ffffbf52032a77e0
[ 6526.739113] CR2: 0000000000000000
[ 6526.739639] ---[ end trace cdae7e7173d5079a ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
