On Wed, Oct 25, 2017 at 02:05:48PM +0200, andreas.bt...@diezwickers.de wrote: > Hi, > > I've had problems with a btrfs filesystem on a usb disk. I made a > successfull backup of all data and created the filesystem from scratch. > I'm not able to restore all backuped data because of a kernel oops. > The problem is reproducible. > > I've checked my RAM alreayd with memtest86 for 8h without any problems > found. > > Could you be so kind to provide any information to solve the problem? > > Thanks for you help. > > Andreas > > uname -a > ======== > Linux fatblock 4.12.0-0.bpo.2-amd64 #1 SMP Debian 4.12.13-1~bpo9+1 > (2017-09-28) x86_64 GNU/Linux > > btrfs --version > =============== > btrfs-progs v4.9.1 > > btrfs fi df /mnt/archive/ > ========================= > Data, single: total=1.20TiB, used=1.20TiB > System, DUP: total=40.00MiB, used=160.00KiB > Metadata, DUP: total=3.50GiB, used=2.79GiB > GlobalReserve, single: total=512.00MiB, used=0.00B > > smartctl -a /dev/sdf > ==================== > andi@fatblock:/etc/initramfs-tools$ sudo smartctl -a /dev/sdf > smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.12.0-0.bpo.2-amd64] (local > build) > Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org > > === START OF INFORMATION SECTION === > Model Family: Seagate NAS HDD > Device Model: ST4000VN000-1H4168 > Serial Number: Z300MKYZ > LU WWN Device Id: 5 000c50 063dd0357 > Firmware Version: SC43 > User Capacity: 4.000.787.030.016 bytes [4,00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Rotation Rate: 5900 rpm > Form Factor: 3.5 inches > Device is: In smartctl database [for details use: -P show] > ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b > SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) > Local Time is: Wed Oct 25 14:03:51 2017 CEST > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 117) seconds. > Offline data collection > capabilities: (0x73) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > No Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 1) minutes. > Extended self-test routine > recommended polling time: ( 517) minutes. > Conveyance self-test routine > recommended polling time: ( 2) minutes. > SCT capabilities: (0x10bd) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 109 099 006 Pre-fail Always > - 23673928 > 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always > - 0 > 4 Start_Stop_Count 0x0032 078 078 020 Old_age Always > - 23040 > 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always > - 0 > 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always > - 218165830 > 9 Power_On_Hours 0x0032 059 059 000 Old_age Always > - 36667 > 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always > - 31 > 184 End-to-End_Error 0x0032 100 100 099 Old_age Always > - 0 > 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always > - 0 > 188 Command_Timeout 0x0032 100 099 000 Old_age Always > - 21475164165 > 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always > - 1479 > 190 Airflow_Temperature_Cel 0x0022 074 056 045 Old_age Always > - 26 (Min/Max 21/40) > 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always > - 0 > 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always > - 30 > 193 Load_Cycle_Count 0x0032 058 058 000 Old_age Always > - 85601 > 194 Temperature_Celsius 0x0022 026 044 000 Old_age Always > - 26 (0 20 0 0 0) > 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always > - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > > dmesg > ===== > [ 0.000000] microcode: microcode updated early to revision 0x22, date = > 2017-01-27 > [ 0.000000] Linux version 4.12.0-0.bpo.2-amd64 > (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170516 (Debian > 6.3.0-18) ) #1 SMP Debian 4.12.13-1~bpo9+1 (2017-09-28) > [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-0.bpo.2-amd64 > root=UUID=9208425d-8927-4ca1-83f6-a946adb13588 ro rootflags=subvol=@ > cgroup_enable=memory swappaccount=1 pcie_aspm.policy=powersave > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point > registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' > [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 > [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 > bytes, using 'standard' format. > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6c80fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000c6c81000-0x00000000c6c87fff] ACPI > NVS > [ 0.000000] BIOS-e820: [mem 0x00000000c6c88000-0x00000000c70cafff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000c70cb000-0x00000000c765bfff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000c765c000-0x00000000d8da7fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000d8da8000-0x00000000d8e3efff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000d8e3f000-0x00000000d8e90fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000d8e91000-0x00000000d8fc7fff] ACPI > NVS > [ 0.000000] BIOS-e820: [mem 0x00000000d8fc8000-0x00000000d9ffefff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.8 present. > [ 0.000000] DMI: MSI MS-7823/H87M-G43 (MS-7823), BIOS V1.9 05/30/2015 > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] e820: last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-CFFFF write-protect > [ 0.000000] D0000-E7FFF uncachable > [ 0.000000] E8000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 0000000000 mask 7F00000000 write-back > [ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back > [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable > [ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable > [ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable > [ 0.000000] 5 base 011F000000 mask 7FFF000000 uncachable > [ 0.000000] 6 base 011EE00000 mask 7FFFE00000 uncachable > [ 0.000000] 7 disabled > [ 0.000000] 8 disabled > [ 0.000000] 9 disabled > [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT > [ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved > [ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000fd7d0-0x000fd7df] mapped at > [ffff9dad800fd7d0] > [ 0.000000] Base memory trampoline at [ffff9dad80097000] 97000 size 24576 > [ 0.000000] Using GB pages for direct mapping > [ 0.000000] BRK [0x20754000, 0x20754fff] PGTABLE > [ 0.000000] BRK [0x20755000, 0x20755fff] PGTABLE > [ 0.000000] BRK [0x20756000, 0x20756fff] PGTABLE > [ 0.000000] BRK [0x20757000, 0x20757fff] PGTABLE > [ 0.000000] BRK [0x20758000, 0x20758fff] PGTABLE > [ 0.000000] BRK [0x20759000, 0x20759fff] PGTABLE > [ 0.000000] BRK [0x2075a000, 0x2075afff] PGTABLE > [ 0.000000] BRK [0x2075b000, 0x2075bfff] PGTABLE > [ 0.000000] BRK [0x2075c000, 0x2075cfff] PGTABLE > [ 0.000000] BRK [0x2075d000, 0x2075dfff] PGTABLE > [ 0.000000] BRK [0x2075e000, 0x2075efff] PGTABLE > [ 0.000000] BRK [0x2075f000, 0x2075ffff] PGTABLE > [ 0.000000] RAMDISK: [mem 0x345bb000-0x362d4fff] > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) > [ 0.000000] ACPI: XSDT 0x00000000D8F99080 000084 (v01 ALASKA A M I > 01072009 AMI 00010013) > [ 0.000000] ACPI: FACP 0x00000000D8FA69E0 00010C (v05 ALASKA A M I > 01072009 AMI 00010013) > [ 0.000000] ACPI: DSDT 0x00000000D8F991A0 00D839 (v02 ALASKA A M I > 00000036 INTL 20120711) > [ 0.000000] ACPI: FACS 0x00000000D8FC7F80 000040 > [ 0.000000] ACPI: APIC 0x00000000D8FA6AF0 000092 (v03 ALASKA A M I > 01072009 AMI 00010013) > [ 0.000000] ACPI: FPDT 0x00000000D8FA6B88 000044 (v01 ALASKA A M I > 01072009 AMI 00010013) > [ 0.000000] ACPI: SSDT 0x00000000D8FA6BD0 000539 (v01 PmRef Cpu0Ist > 00003000 INTL 20120711) > [ 0.000000] ACPI: SSDT 0x00000000D8FA7110 000AD8 (v01 PmRef CpuPm > 00003000 INTL 20120711) > [ 0.000000] ACPI: MCFG 0x00000000D8FA7BE8 00003C (v01 ALASKA A M I > 01072009 MSFT 00000097) > [ 0.000000] ACPI: HPET 0x00000000D8FA7C28 000038 (v01 ALASKA A M I > 01072009 AMI. 00000005) > [ 0.000000] ACPI: SSDT 0x00000000D8FA7C60 00036D (v01 SataRe SataTabl > 00001000 INTL 20120711) > [ 0.000000] ACPI: SSDT 0x00000000D8FA7FD0 003528 (v01 SaSsdt SaSsdt > 00003000 INTL 20091112) > [ 0.000000] ACPI: ASF! 0x00000000D8FAB4F8 0000A5 (v32 INTEL HCG > 00000001 TFSM 000F4240) > [ 0.000000] ACPI: DMAR 0x00000000D8FAB5A0 0000B8 (v01 INTEL HSW 00000001 > INTL 00000001) > [ 0.000000] ACPI: SSDT 0x00000000D8FAB658 000A26 (v01 Intel_ IsctTabl > 00001000 INTL 20120711) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] > [ 0.000000] NODE_DATA(0) allocated [mem 0x11edfb000-0x11edfffff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > [ 0.000000] Normal [mem 0x0000000100000000-0x000000011edfffff] > [ 0.000000] Device empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] > [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c6c80fff] > [ 0.000000] node 0: [mem 0x00000000c6c88000-0x00000000c70cafff] > [ 0.000000] node 0: [mem 0x00000000c765c000-0x00000000d8da7fff] > [ 0.000000] node 0: [mem 0x00000000d8e3f000-0x00000000d8e90fff] > [ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff] > [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011edfffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000000001000-0x000000011edfffff] > [ 0.000000] On node 0 totalpages: 1013247 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 21 pages reserved > [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 13794 pages used for memmap > [ 0.000000] DMA32 zone: 882787 pages, LIFO batch:31 > [ 0.000000] Normal zone: 1976 pages used for memmap > [ 0.000000] Normal zone: 126464 pages, LIFO batch:31 > [ 0.000000] Reserving Intel graphics memory at > 0x00000000db200000-0x00000000df1fffff > [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] > [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] > [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xc6c81000-0xc6c87fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xc70cb000-0xc765bfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xd8da8000-0xd8e3efff] > [ 0.000000] PM: Registered nosave memory: [mem 0xd8e91000-0xd8fc7fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xd8fc8000-0xd9ffefff] > [ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] > [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] > [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] > [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645519600211568 ns > [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 > nr_node_ids:1 > [ 0.000000] percpu: Embedded 38 pages/cpu @ffff9dae9ea00000 s114840 r8192 > d32616 u262144 > [ 0.000000] pcpu-alloc: s114840 r8192 d32616 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total > pages: 997392 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: > BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-0.bpo.2-amd64 > root=UUID=9208425d-8927-4ca1-83f6-a946adb13588 ro rootflags=subvol=@ > cgroup_enable=memory swappaccount=1 pcie_aspm.policy=powersave > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] Memory: 3874576K/4052988K available (6485K kernel code, 1145K > rwdata, 2908K rodata, 1468K init, 704K bss, 178412K reserved, 0K > cma-reserved) > [ 0.000000] ftrace: allocating 28157 entries in 110 pages > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 > [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 > [ 0.000000] spurious 8259A interrupt: IRQ7. > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 133484882848 ns > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.004000] tsc: Detected 3399.816 MHz processor > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 6799.63 BogoMIPS (lpj=13599264) > [ 0.004000] pid_max: default: 32768 minimum: 301 > [ 0.004000] ACPI: Core revision 20170303 > [ 0.012103] ACPI: 6 ACPI AML tables successfully acquired and loaded > [ 0.012192] Security Framework initialized > [ 0.012247] Yama: disabled by default; enable with sysctl kernel.yama.* > [ 0.012309] AppArmor: AppArmor disabled by boot time parameter > [ 0.012495] Dentry cache hash table entries: 524288 (order: 10, 4194304 > bytes) > [ 0.013124] Inode-cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 0.013462] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > [ 0.013523] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 > bytes) > [ 0.013734] CPU: Physical Processor ID: 0 > [ 0.013789] CPU: Processor Core ID: 0 > [ 0.013845] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.013903] ENERGY_PERF_BIAS: View and update with > x86_energy_perf_policy(8) > [ 0.013964] mce: CPU supports 9 MCE banks > [ 0.014025] CPU0: Thermal monitoring enabled (TM1) > [ 0.014089] process: using mwait in idle threads > [ 0.014146] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 > [ 0.014204] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 > [ 0.014347] Freeing SMP alternatives memory: 24K > [ 0.016053] smpboot: Max logical packages: 2 > [ 0.016110] DMAR: Host address width 39 > [ 0.016164] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 > [ 0.020017] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap > c0000020660462 ecap f0101a > [ 0.020088] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 > [ 0.020146] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap > d2008020660462 ecap f010da > [ 0.020218] DMAR: RMRR base: 0x000000d9ea4000 end: 0x000000d9eb2fff > [ 0.020277] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff > [ 0.020336] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 > [ 0.020393] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 > [ 0.020450] DMAR-IR: Queued invalidation will be enabled to support > x2apic and Intr-remapping. > [ 0.020788] DMAR-IR: Enabled IRQ remapping in x2apic mode > [ 0.020845] x2apic enabled > [ 0.020899] Switched APIC routing to cluster x2apic. > [ 0.021368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.061167] TSC deadline timer enabled > [ 0.061170] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1245 v3 @ 3.40GHz > (family: 0x6, model: 0x3c, stepping: 0x3) > [ 0.061286] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, > full-width counters, Intel PMU driver. > [ 0.062124] ... version: 3 > [ 0.062178] ... bit width: 48 > [ 0.062232] ... generic registers: 4 > [ 0.062287] ... value mask: 0000ffffffffffff > [ 0.062343] ... max period: 00007fffffffffff > [ 0.062399] ... fixed-purpose events: 3 > [ 0.062453] ... event mask: 000000070000000f > [ 0.062913] NMI watchdog: enabled on all CPUs, permanently consumes one > hw-PMU counter. > [ 0.062995] smp: Bringing up secondary CPUs ... > [ 0.063104] x86: Booting SMP configuration: > [ 0.063158] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 > [ 0.620014] smp: Brought up 1 node, 8 CPUs > [ 0.620114] smpboot: Total of 8 processors activated (54404.80 BogoMIPS) > [ 0.624109] sched_clock: Marking stable (624000000, 0)->(626588257, > -2588257) > [ 0.624339] devtmpfs: initialized > [ 0.624429] x86/mm: Memory block size: 128MB > [ 0.625695] PM: Registering ACPI NVS region [mem 0xc6c81000-0xc6c87fff] > (28672 bytes) > [ 0.625769] PM: Registering ACPI NVS region [mem 0xd8e91000-0xd8fc7fff] > (1273856 bytes) > [ 0.625897] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.625981] futex hash table entries: 2048 (order: 5, 131072 bytes) > [ 0.626085] pinctrl core: initialized pinctrl subsystem > [ 0.626215] NET: Registered protocol family 16 > [ 0.626390] cpuidle: using governor ladder > [ 0.626460] cpuidle: using governor menu > [ 0.626517] PCCT header not found. > [ 0.626597] ACPI FADT declares the system doesn't support PCIe ASPM, so > disable it > [ 0.626669] ACPI: bus type PCI registered > [ 0.626723] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.626825] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem > 0xf8000000-0xfbffffff] (base 0xf8000000) > [ 0.626900] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > [ 0.626962] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with > a huge-page mapping due to MTRR override. > [ 0.627082] PCI: Using configuration type 1 for base access > [ 0.627179] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on > [ 0.627858] HugeTLB registered 1 GB page size, pre-allocated 0 pages > [ 0.627917] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.628130] ACPI: Added _OSI(Module Device) > [ 0.628186] ACPI: Added _OSI(Processor Device) > [ 0.628241] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.628297] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.628488] ACPI: Executed 1 blocks of module-level executable AML code > [ 0.631523] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored > [ 0.632192] ACPI: Dynamic OEM Table Load: > [ 0.632251] ACPI: SSDT 0xFFFF9DAE9907C000 0003D3 (v01 PmRef Cpu0Cst > 00003001 INTL 20120711) > [ 0.632587] ACPI: Dynamic OEM Table Load: > [ 0.632645] ACPI: SSDT 0xFFFF9DAE9921B000 0005AA (v01 PmRef ApIst > 00003000 INTL 20120711) > [ 0.633009] ACPI: Dynamic OEM Table Load: > [ 0.633067] ACPI: SSDT 0xFFFF9DAE9928E000 000119 (v01 PmRef ApCst > 00003000 INTL 20120711) > [ 0.634425] ACPI: Interpreter enabled > [ 0.634500] ACPI: (supports S0 S3 S4 S5) > [ 0.634554] ACPI: Using IOAPIC for interrupt routing > [ 0.634627] PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > [ 0.641764] ACPI: Power Resource [FN00] (off) > [ 0.641871] ACPI: Power Resource [FN01] (off) > [ 0.641975] ACPI: Power Resource [FN02] (off) > [ 0.642076] ACPI: Power Resource [FN03] (off) > [ 0.642177] ACPI: Power Resource [FN04] (off) > [ 0.642728] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) > [ 0.642789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > ClockPM Segments MSI] > [ 0.643017] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug > PME] > [ 0.643175] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] > [ 0.643234] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using > BIOS configuration > [ 0.643577] PCI host bridge to bus 0000:00 > [ 0.643632] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] > [ 0.643691] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > [ 0.643750] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff > window] > [ 0.643822] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff > window] > [ 0.643894] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff > window] > [ 0.643965] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff > window] > [ 0.644038] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff > window] > [ 0.644110] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff > window] > [ 0.644182] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff > window] > [ 0.644253] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff > window] > [ 0.644325] pci_bus 0000:00: root bus resource [bus 00-3e] > [ 0.644386] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 > [ 0.644447] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 > [ 0.644454] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] > [ 0.644458] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit > pref] > [ 0.644460] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] > [ 0.644514] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 > [ 0.644519] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] > [ 0.644592] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 > [ 0.644606] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] > [ 0.644655] pci 0000:00:14.0: PME# supported from D3hot D3cold > [ 0.644683] pci 0000:00:14.0: System wakeup disabled by ACPI > [ 0.644764] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 > [ 0.644778] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit] > [ 0.644830] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 0.644884] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 > [ 0.644898] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff] > [ 0.644967] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > [ 0.645007] pci 0000:00:1a.0: System wakeup disabled by ACPI > [ 0.645087] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 > [ 0.645100] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] > [ 0.645157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.645189] pci 0000:00:1b.0: System wakeup disabled by ACPI > [ 0.645267] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 > [ 0.645327] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.645384] pci 0000:00:1c.0: System wakeup disabled by ACPI > [ 0.645465] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 > [ 0.645519] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.645570] pci 0000:00:1c.4: System wakeup disabled by ACPI > [ 0.645649] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 > [ 0.645702] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > [ 0.645752] pci 0000:00:1c.5: System wakeup disabled by ACPI > [ 0.645833] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 > [ 0.645848] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] > [ 0.645917] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > [ 0.645955] pci 0000:00:1d.0: System wakeup disabled by ACPI > [ 0.646034] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100 > [ 0.646164] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 > [ 0.646174] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] > [ 0.646180] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] > [ 0.646186] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] > [ 0.646192] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] > [ 0.646197] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] > [ 0.646203] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] > [ 0.646232] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.646275] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 > [ 0.646287] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] > [ 0.646303] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] > [ 0.646404] acpiphp: Slot [1] registered > [ 0.646462] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.646577] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.646599] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] > [ 0.646625] pci 0000:02:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit] > [ 0.646640] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit > pref] > [ 0.646726] pci 0000:02:00.0: supports D1 D2 > [ 0.646726] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.646765] pci 0000:02:00.0: System wakeup disabled by ACPI > [ 0.656059] pci 0000:00:1c.4: PCI bridge to [bus 02] > [ 0.656117] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] > [ 0.656119] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] > [ 0.656123] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff > 64bit pref] > [ 0.656183] pci 0000:03:00.0: [dd01:0003] type 00 class 0x048000 > [ 0.656214] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit] > [ 0.656354] pci 0000:03:00.0: System wakeup disabled by ACPI > [ 0.668057] pci 0000:00:1c.5: PCI bridge to [bus 03] > [ 0.668115] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff] > [ 0.668660] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 > 15) > [ 0.668753] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 > 15) > [ 0.668843] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 > 15) > [ 0.668934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 > 15) > [ 0.669023] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) > *0, disabled. > [ 0.669128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) > *0, disabled. > [ 0.669232] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 > 15) > [ 0.669322] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 > 15) > [ 0.669619] ACPI: Enabled 4 GPEs in block 00 to 3F > [ 0.669736] pci 0000:00:02.0: vgaarb: setting as boot VGA device > [ 0.669795] pci 0000:00:02.0: vgaarb: VGA device added: > decodes=io+mem,owns=io+mem,locks=none > [ 0.669869] pci 0000:00:02.0: vgaarb: bridge control possible > [ 0.669925] vgaarb: loaded > [ 0.670000] EDAC MC: Ver: 3.0.0 > [ 0.670127] PCI: Using ACPI for IRQ routing > [ 0.671326] PCI: pci_cache_line_size set to 64 bytes > [ 0.671358] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] > [ 0.671359] e820: reserve RAM buffer [mem 0xc6c81000-0xc7ffffff] > [ 0.671360] e820: reserve RAM buffer [mem 0xc70cb000-0xc7ffffff] > [ 0.671360] e820: reserve RAM buffer [mem 0xd8da8000-0xdbffffff] > [ 0.671361] e820: reserve RAM buffer [mem 0xd8e91000-0xdbffffff] > [ 0.671362] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff] > [ 0.671362] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] > [ 0.671463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > [ 0.671524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter > [ 0.673597] clocksource: Switched to clocksource hpet > [ 0.679243] VFS: Disk quotas dquot_6.6.0 > [ 0.679309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.679412] pnp: PnP ACPI init > [ 0.679511] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved > [ 0.679572] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.679691] system 00:01: [io 0x0680-0x069f] has been reserved > [ 0.679749] system 00:01: [io 0xffff] has been reserved > [ 0.679806] system 00:01: [io 0xffff] has been reserved > [ 0.679863] system 00:01: [io 0xffff] has been reserved > [ 0.679919] system 00:01: [io 0x1c00-0x1cfe] has been reserved > [ 0.679976] system 00:01: [io 0x1d00-0x1dfe] has been reserved > [ 0.680034] system 00:01: [io 0x1e00-0x1efe] has been reserved > [ 0.680091] system 00:01: [io 0x1f00-0x1ffe] has been reserved > [ 0.680149] system 00:01: [io 0x1800-0x18fe] has been reserved > [ 0.680207] system 00:01: [io 0x164e-0x164f] has been reserved > [ 0.680265] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.680278] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.680308] system 00:03: [io 0x1854-0x1857] has been reserved > [ 0.680366] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 > (active) > [ 0.680437] system 00:04: [io 0x0a00-0x0a0f] has been reserved > [ 0.680494] system 00:04: [io 0x0a10-0x0a1f] has been reserved > [ 0.680552] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.680653] pnp 00:05: [dma 0 disabled] > [ 0.680679] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.680835] pnp 00:06: [dma 0 disabled] > [ 0.680890] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) > [ 0.680919] system 00:07: [io 0x04d0-0x04d1] has been reserved > [ 0.680979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.681253] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved > [ 0.681312] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved > [ 0.681371] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved > [ 0.681430] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved > [ 0.681489] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.681549] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved > [ 0.681617] system 00:08: [mem 0xfed90000-0xfed93fff] could not be > reserved > [ 0.681676] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved > [ 0.681734] system 00:08: [mem 0xff000000-0xffffffff] has been reserved > [ 0.681793] system 00:08: [mem 0xfee00000-0xfeefffff] could not be > reserved > [ 0.681852] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved > [ 0.681910] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved > [ 0.681970] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.682115] pnp: PnP ACPI: found 9 devices > [ 0.687863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, > max_idle_ns: 2085701024 ns > [ 0.687947] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus > 01] add_size 1000 > [ 0.687949] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff > 64bit pref] to [bus 01] add_size 200000 add_align 100000 > [ 0.687950] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] > to [bus 01] add_size 200000 add_align 100000 > [ 0.687965] pci 0000:00:1c.0: BAR 14: assigned [mem > 0xdf200000-0xdf3fffff] > [ 0.688028] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff > 64bit pref] > [ 0.688101] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] > [ 0.688159] pci 0000:00:1c.0: PCI bridge to [bus 01] > [ 0.688215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] > [ 0.688275] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff] > [ 0.688335] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff > 64bit pref] > [ 0.688411] pci 0000:00:1c.4: PCI bridge to [bus 02] > [ 0.688467] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] > [ 0.688526] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] > [ 0.688587] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff > 64bit pref] > [ 0.688662] pci 0000:00:1c.5: PCI bridge to [bus 03] > [ 0.688721] pci 0000:00:1c.5: bridge window [mem 0xf7c00000-0xf7cfffff] > [ 0.688784] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] > [ 0.688785] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] > [ 0.688785] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff > window] > [ 0.688786] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff > window] > [ 0.688787] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff > window] > [ 0.688787] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff > window] > [ 0.688788] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff > window] > [ 0.688788] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff > window] > [ 0.688789] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff > window] > [ 0.688790] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff > window] > [ 0.688790] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] > [ 0.688791] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff] > [ 0.688792] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit > pref] > [ 0.688792] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] > [ 0.688793] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] > [ 0.688794] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit > pref] > [ 0.688794] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] > [ 0.688867] NET: Registered protocol family 2 > [ 0.689018] TCP established hash table entries: 32768 (order: 6, 262144 > bytes) > [ 0.689880] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) > [ 0.690009] TCP: Hash tables configured (established 32768 bind 32768) > [ 0.690091] UDP hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.690159] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.690258] NET: Registered protocol family 1 > [ 0.690320] pci 0000:00:02.0: Video device with shadowed ROM at [mem > 0x000c0000-0x000dffff] > [ 0.690720] PCI: CLS 64 bytes, default 64 > [ 0.690743] Unpacking initramfs... > [ 1.028870] Freeing initrd memory: 29800K > [ 1.028965] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 1.029025] software IO TLB [mem 0xd4da8000-0xd8da8000] (64MB) mapped at > [ffff9dae54da8000-ffff9dae58da7fff] > [ 1.029421] audit: initializing netlink subsys (disabled) > [ 1.029527] audit: type=2000 audit(1508909884.027:1): state=initialized > audit_enabled=0 res=1 > [ 1.029769] workingset: timestamp_bits=40 max_order=20 bucket_order=0 > [ 1.029887] zbud: loaded > [ 1.245581] Key type asymmetric registered > [ 1.245643] Asymmetric key parser 'x509' registered > [ 1.245708] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 249) > [ 1.245804] io scheduler noop registered > [ 1.245859] io scheduler deadline registered > [ 1.245919] io scheduler cfq registered (default) > [ 1.245975] io scheduler mq-deadline registered > [ 1.246400] intel_idle: MWAIT substates: 0x42120 > [ 1.246401] intel_idle: v0.4.1 model 0x3C > [ 1.246604] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 1.246732] GHES: HEST is not enabled! > [ 1.246826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.267290] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a > 16550A > [ 1.267621] Linux agpgart interface v0.103 > [ 1.267722] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de> > [ 1.267780] AMD IOMMUv2 functionality not available on this system > [ 1.268258] i8042: PNP: No PS/2 controller found. > [ 1.268353] mousedev: PS/2 mouse device common for all mice > [ 1.268432] rtc_cmos 00:02: RTC can wake from S4 > [ 1.268582] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > [ 1.268664] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, > hpet irqs > [ 1.268743] intel_pstate: Intel P-state driver initializing > [ 1.269211] ledtrig-cpu: registered to indicate activity on CPUs > [ 1.270308] NET: Registered protocol family 10 > [ 1.270860] Segment Routing with IPv6 > [ 1.270977] mip6: Mobile IPv6 > [ 1.271061] NET: Registered protocol family 17 > [ 1.271151] mpls_gso: MPLS GSO support > [ 1.272384] microcode: sig=0x306c3, pf=0x2, revision=0x22 > [ 1.272779] microcode: Microcode Update Driver: v2.2. > [ 1.273222] registered taskstats version 1 > [ 1.273439] zswap: loaded using pool lzo/zbud > [ 1.273807] ima: No TPM chip found, activating TPM-bypass! (rc=-19) > [ 1.274765] rtc_cmos 00:02: setting system clock to 2017-10-25 05:38:05 > UTC (1508909885) > [ 1.275005] PM: Hibernation image not present or could not be loaded. > [ 1.278313] Freeing unused kernel memory: 1468K > [ 1.278402] Write protecting the kernel read-only data: 12288k > [ 1.279576] Freeing unused kernel memory: 1692K > [ 1.282963] Freeing unused kernel memory: 1188K > [ 1.283817] x86/mm: Checked W+X mappings: passed, no W+X pages found. > [ 1.292098] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 1.292226] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 1.292296] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 1.292368] random: systemd-udevd: uninitialized urandom read (16 bytes > read) > [ 1.292767] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.292855] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.293776] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.293880] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.293980] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.294077] random: udevadm: uninitialized urandom read (16 bytes read) > [ 1.307606] input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 1.307695] ACPI: Power Button [PWRB] > [ 1.307795] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 1.307881] ACPI: Power Button [PWRF] > [ 1.310186] wmi: Mapper loaded > [ 1.314358] (NULL device *): hwmon_device_register() is deprecated. > Please convert the driver to use hwmon_device_register_with_info(). > [ 1.314573] thermal LNXTHERM:00: registered as thermal_zone0 > [ 1.314642] ACPI: Thermal Zone [TZ00] (28 C) > [ 1.314994] thermal LNXTHERM:01: registered as thermal_zone1 > [ 1.315065] ACPI: Thermal Zone [TZ01] (30 C) > [ 1.315564] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.315633] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM > control > [ 1.315863] i801_smbus 0000:00:1f.3: SPD Write Disable is set > [ 1.315954] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt > [ 1.316158] ACPI: bus type USB registered > [ 1.316251] usbcore: registered new interface driver usbfs > [ 1.316338] usbcore: registered new interface driver hub > [ 1.316435] usbcore: registered new device driver usb > [ 1.316904] SCSI subsystem initialized > [ 1.317125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.317672] ehci-pci: EHCI PCI platform driver > [ 1.317826] ehci-pci 0000:00:1a.0: EHCI Host Controller > [ 1.317899] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus > number 1 > [ 1.317984] ehci-pci 0000:00:1a.0: debug port 2 > [ 1.319584] AVX2 version of gcm_enc/dec engaged. > [ 1.319677] AES CTR mode by8 optimization enabled > [ 1.321940] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported > [ 1.321963] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 > [ 1.322068] libata version 3.00 loaded. > [ 1.326542] r8169 0000:02:00.0 eth0: RTL8168g/8111g at > 0xffffbf5200659000, d4:3d:7e:da:35:2c, XID 0c000800 IRQ 26 > [ 1.326635] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, > tx checksumming: ko] > [ 1.337659] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 1.338019] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.338092] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.338166] usb usb1: Product: EHCI Host Controller > [ 1.338224] usb usb1: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 ehci_hcd > [ 1.338285] usb usb1: SerialNumber: 0000:00:1a.0 > [ 1.338541] hub 1-0:1.0: USB hub found > [ 1.338637] hub 1-0:1.0: 2 ports detected > [ 1.339102] ehci-pci 0000:00:1d.0: EHCI Host Controller > [ 1.339164] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus > number 2 > [ 1.339247] ehci-pci 0000:00:1d.0: debug port 2 > [ 1.343208] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported > [ 1.343219] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 > [ 1.357714] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 1.357831] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.357896] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.357975] usb usb2: Product: EHCI Host Controller > [ 1.358036] usb usb2: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 ehci_hcd > [ 1.358100] usb usb2: SerialNumber: 0000:00:1d.0 > [ 1.358381] hub 2-0:1.0: USB hub found > [ 1.358445] hub 2-0:1.0: 2 ports detected > [ 1.358817] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.358890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus > number 3 > [ 1.360064] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version > 0x100 quirks 0x00009810 > [ 1.360155] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported > [ 1.360267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.360335] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.360417] usb usb3: Product: xHCI Host Controller > [ 1.360480] usb usb3: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 xhci-hcd > [ 1.360547] usb usb3: SerialNumber: 0000:00:14.0 > [ 1.360805] hub 3-0:1.0: USB hub found > [ 1.360885] hub 3-0:1.0: 14 ports detected > [ 1.363154] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.363222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus > number 4 > [ 1.363342] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 > [ 1.363409] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.363491] usb usb4: Product: xHCI Host Controller > [ 1.363553] usb usb4: Manufacturer: Linux 4.12.0-0.bpo.2-amd64 xhci-hcd > [ 1.363620] usb usb4: SerialNumber: 0000:00:14.0 > [ 1.363889] hub 4-0:1.0: USB hub found > [ 1.363966] hub 4-0:1.0: 6 ports detected > [ 1.364588] ahci 0000:00:1f.2: version 3.0 > [ 1.364841] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps > 0x3d impl SATA mode > [ 1.364928] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part > ems apst > [ 1.411354] scsi host0: ahci > [ 1.411801] scsi host1: ahci > [ 1.412207] scsi host2: ahci > [ 1.412623] scsi host3: ahci > [ 1.412938] scsi host4: ahci > [ 1.413205] scsi host5: ahci > [ 1.413342] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 > irq 28 > [ 1.413452] ata2: DUMMY > [ 1.413524] ata3: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a200 > irq 28 > [ 1.413630] ata4: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a280 > irq 28 > [ 1.413750] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 > irq 28 > [ 1.413854] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 > irq 28 > [ 1.414496] [drm] Memory usable by graphics device = 2048M > [ 1.414581] [drm] Replacing VGA console driver > [ 1.415471] Console: switching to colour dummy device 80x25 > [ 1.422280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 1.422288] [drm] Driver supports precise vblank timestamp query. > [ 1.425041] i915 0000:00:02.0: vgaarb: changed VGA decodes: > olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 1.432259] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on > minor 0 > [ 1.434877] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [ 1.435786] acpi device:62: registered as cooling_device13 > [ 1.435914] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 > [ 1.533225] fbcon: inteldrmfb (fb0) is primary device > [ 1.603498] Console: switching to colour frame buffer device 128x48 > [ 1.623924] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 1.665764] usb 1-1: new high-speed USB device number 2 using ehci-pci > [ 1.685762] usb 2-1: new high-speed USB device number 2 using ehci-pci > [ 1.689949] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd > [ 1.711288] usb 4-1: New USB device found, idVendor=174c, idProduct=5106 > [ 1.711354] usb 4-1: New USB device strings: Mfr=2, Product=3, > SerialNumber=1 > [ 1.711409] usb 4-1: Product: AS2105 > [ 1.711439] usb 4-1: Manufacturer: ASMedia > [ 1.711473] usb 4-1: SerialNumber: Z300MKYZ > [ 1.715264] usb-storage 4-1:1.0: USB Mass Storage device detected > [ 1.715546] scsi host6: usb-storage 4-1:1.0 > [ 1.715698] usbcore: registered new interface driver usb-storage > [ 1.716317] usbcore: registered new interface driver uas > [ 1.729508] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.729594] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.729651] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.729749] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.729804] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.731284] ata5.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133 > [ 1.731354] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 1.731449] ata1.00: supports DRM functions and may not be fully > accessible > [ 1.731502] ata3.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133 > [ 1.732683] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 1.733926] ata4.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133 > [ 1.736150] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 1.738467] ata6.00: ATA-10: ST4000VN000-2AH166, SC60, max UDMA/133 > [ 1.739563] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 1.740692] ata1.00: NCQ Send/Recv Log not supported > [ 1.741558] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max > UDMA/133 > [ 1.742391] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), > AA > [ 1.743634] ata1.00: supports DRM functions and may not be fully > accessible > [ 1.744370] ata5.00: configured for UDMA/133 > [ 1.745099] ata3.00: configured for UDMA/133 > [ 1.745895] ata4.00: configured for UDMA/133 > [ 1.746745] ata1.00: NCQ Send/Recv Log not supported > [ 1.747468] ata6.00: configured for UDMA/133 > [ 1.748115] ata1.00: configured for UDMA/133 > [ 1.748795] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q > PQ: 0 ANSI: 5 > [ 1.786119] scsi 2:0:0:0: Direct-Access ATA ST4000VN000-2AH1 > SC60 PQ: 0 ANSI: 5 > [ 1.814182] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 > [ 1.814749] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 1.815524] hub 1-1:1.0: USB hub found > [ 1.816122] hub 1-1:1.0: 6 ports detected > [ 1.822099] scsi 3:0:0:0: Direct-Access ATA ST4000VN000-2AH1 > SC60 PQ: 0 ANSI: 5 > [ 1.829747] usb 3-5: new high-speed USB device number 2 using xhci_hcd > [ 1.838146] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 > [ 1.838804] usb 2-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 1.839788] hub 2-1:1.0: USB hub found > [ 1.840521] hub 2-1:1.0: 8 ports detected > [ 1.858252] scsi 4:0:0:0: Direct-Access ATA ST4000VN000-2AH1 > SC60 PQ: 0 ANSI: 5 > [ 1.902245] scsi 5:0:0:0: Direct-Access ATA ST4000VN000-2AH1 > SC60 PQ: 0 ANSI: 5 > [ 1.945262] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 > TB/3.64 TiB) > [ 1.945276] sd 3:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 > TB/3.64 TiB) > [ 1.945279] sd 3:0:0:0: [sdc] 4096-byte physical blocks > [ 1.945287] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 > GB/233 GiB) > [ 1.945298] sd 3:0:0:0: [sdc] Write Protect is off > [ 1.945301] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > [ 1.945306] sd 0:0:0:0: [sda] Write Protect is off > [ 1.945308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.945328] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.945337] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 > TB/3.64 TiB) > [ 1.945338] sd 4:0:0:0: [sdd] 4096-byte physical blocks > [ 1.945354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.945361] sd 4:0:0:0: [sdd] Write Protect is off > [ 1.945364] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > [ 1.945408] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.945417] sd 5:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 > TB/3.64 TiB) > [ 1.945419] sd 5:0:0:0: [sde] 4096-byte physical blocks > [ 1.945442] sd 5:0:0:0: [sde] Write Protect is off > [ 1.945445] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 > [ 1.945483] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.947552] sda: sda1 sda2 sda3 > [ 1.948134] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.954787] sd 2:0:0:0: [sdb] 4096-byte physical blocks > [ 1.955246] sd 2:0:0:0: [sdb] Write Protect is off > [ 1.955686] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 1.955691] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.969990] usb 3-5: New USB device found, idVendor=1a40, idProduct=0101 > [ 1.970491] usb 3-5: New USB device strings: Mfr=0, Product=1, > SerialNumber=0 > [ 1.970983] usb 3-5: Product: USB 2.0 Hub > [ 1.971849] hub 3-5:1.0: USB hub found > [ 1.972346] hub 3-5:1.0: 4 ports detected > [ 1.998772] sdc: sdc1 > [ 1.999946] sd 3:0:0:0: [sdc] Attached SCSI disk > [ 2.001103] sdd: sdd1 > [ 2.001145] sde: sde1 > [ 2.001596] sd 5:0:0:0: [sde] Attached SCSI disk > [ 2.003237] sd 4:0:0:0: [sdd] Attached SCSI disk > [ 2.015202] sdb: sdb1 > [ 2.016264] sd 2:0:0:0: [sdb] Attached SCSI disk > [ 2.027569] random: fast init done > [ 2.045728] tsc: Refined TSC clocksource calibration: 3399.997 MHz > [ 2.046176] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: > 0x31024bd20a6, max_idle_ns: 440795346804 ns > [ 2.089713] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd > [ 2.110323] usb 4-2: New USB device found, idVendor=174c, idProduct=55aa > [ 2.110822] usb 4-2: New USB device strings: Mfr=2, Product=3, > SerialNumber=1 > [ 2.111314] usb 4-2: Product: ICY BOX IB-366StU3+B > [ 2.111767] usb 4-2: Manufacturer: ICY BOX > [ 2.112200] usb 4-2: SerialNumber: 123456789012 > [ 2.113206] usb 4-2: UAS is blacklisted for this device, using > usb-storage instead > [ 2.113713] usb-storage 4-2:1.0: USB Mass Storage device detected > [ 2.114291] usb-storage 4-2:1.0: Quirks match for vid 174c pid 55aa: > 400000 > [ 2.114783] scsi host7: usb-storage 4-2:1.0 > [ 2.209692] raid6: sse2x1 gen() 11397 MB/s > [ 2.229697] usb 3-6: new full-speed USB device number 3 using xhci_hcd > [ 2.277703] raid6: sse2x1 xor() 8990 MB/s > [ 2.345708] raid6: sse2x2 gen() 15314 MB/s > [ 2.371613] usb 3-6: New USB device found, idVendor=03eb, idProduct=204b > [ 2.372063] usb 3-6: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 2.372516] usb 3-6: Product: CUL868 > [ 2.372957] usb 3-6: Manufacturer: busware.de > [ 2.413712] raid6: sse2x2 xor() 10270 MB/s > [ 2.469722] usb 3-5.1: new full-speed USB device number 4 using xhci_hcd > [ 2.481716] raid6: sse2x4 gen() 17531 MB/s > [ 2.549718] raid6: sse2x4 xor() 12342 MB/s > [ 2.591436] usb 3-5.1: New USB device found, idVendor=10c4, > idProduct=ea60 > [ 2.591876] usb 3-5.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2.592313] usb 3-5.1: Product: CP2104 USB to UART Bridge Controller > [ 2.592751] usb 3-5.1: Manufacturer: Silicon Labs > [ 2.593185] usb 3-5.1: SerialNumber: 0079E5E9 > [ 2.617720] raid6: avx2x1 gen() 23365 MB/s > [ 2.685725] raid6: avx2x1 xor() 17266 MB/s > [ 2.709733] usb 3-14: new low-speed USB device number 5 using xhci_hcd > [ 2.753730] raid6: avx2x2 gen() 27424 MB/s > [ 2.821735] raid6: avx2x2 xor() 18620 MB/s > [ 2.868017] usb 3-14: New USB device found, idVendor=04f2, idProduct=0402 > [ 2.868440] usb 3-14: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 2.868856] usb 3-14: Product: USB Keyboard > [ 2.869270] usb 3-14: Manufacturer: Chicony > [ 2.871799] hidraw: raw HID events driver (C) Jiri Kosina > [ 2.889732] raid6: avx2x4 gen() 30856 MB/s > [ 2.896436] usbcore: registered new interface driver usbhid > [ 2.897230] usbhid: USB HID core driver > [ 2.898575] input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:04F2:0402.0001/input/input3 > [ 2.949749] usb 3-5.2: new full-speed USB device number 6 using xhci_hcd > [ 2.957742] raid6: avx2x4 xor() 21374 MB/s > [ 2.957862] hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 > Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-14/input0 > [ 2.957967] input: Chicony USB Keyboard as > /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:04F2:0402.0002/input/input4 > [ 2.960146] raid6: using algorithm avx2x4 gen() 30856 MB/s > [ 2.960631] raid6: .... xor() 21374 MB/s, rmw enabled > [ 2.961113] raid6: using avx2x2 recovery algorithm > [ 2.961747] xor: automatically using best checksumming function avx > > [ 2.961856] scsi 6:0:0:0: Direct-Access ST4000VN 000-1H4168 SC43 PQ: > 0 ANSI: 5 > [ 2.962460] sd 6:0:0:0: [sdf] Very big device. Trying to use READ > CAPACITY(16). > [ 2.962580] sd 6:0:0:0: [sdf] 7814037168 512-byte logical blocks: (4.00 > TB/3.64 TiB) > [ 2.962779] sd 6:0:0:0: [sdf] Write Protect is off > [ 2.962779] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00 > [ 2.962979] sd 6:0:0:0: [sdf] No Caching mode page found > [ 2.962979] sd 6:0:0:0: [sdf] Assuming drive cache: write through > [ 2.963235] sd 6:0:0:0: [sdf] Very big device. Trying to use READ > CAPACITY(16). > [ 2.966280] async_tx: api initialized (async) > [ 2.967778] md/raid:md1: device sdd1 operational as raid disk 2 > [ 2.968298] md/raid:md1: device sde1 operational as raid disk 0 > [ 2.968808] md/raid:md1: device sdc1 operational as raid disk 3 > [ 2.969311] md/raid:md1: device sdb1 operational as raid disk 1 > [ 2.970023] md/raid:md1: raid level 5 active with 4 out of 4 devices, > algorithm 2 > [ 2.990152] sdf: sdf1 > [ 2.991515] sd 6:0:0:0: [sdf] Very big device. Trying to use READ > CAPACITY(16). > [ 2.993377] sd 6:0:0:0: [sdf] Attached SCSI disk > [ 2.995952] md1: detected capacity change from 0 to 12001954234368 > [ 3.017896] hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB > HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-14/input1 > [ 3.070027] clocksource: Switched to clocksource tsc > [ 3.072781] usb 3-5.2: New USB device found, idVendor=10c4, > idProduct=ea60 > [ 3.073691] usb 3-5.2: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 3.074607] usb 3-5.2: Product: CP2104 USB to UART Bridge Controller > [ 3.075512] usb 3-5.2: Manufacturer: Silicon Labs > [ 3.076421] usb 3-5.2: SerialNumber: 0079E4D7 > [ 3.083055] device-mapper: uevent: version 1.0.3 > [ 3.083671] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: > dm-de...@redhat.com > [ 3.134293] scsi 7:0:0:0: Direct-Access ICY BOX IB-366StU3+B 0 > PQ: 0 ANSI: 6 > [ 3.135256] sd 7:0:0:0: [sdg] 15628053168 512-byte logical blocks: (8.00 > TB/7.28 TiB) > [ 3.135907] sd 7:0:0:0: [sdg] 4096-byte physical blocks > [ 3.136683] sd 7:0:0:0: [sdg] Write Protect is off > [ 3.137212] sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00 > [ 3.137409] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 3.138893] random: crng init done > [ 3.166444] sdg: sdg1 > [ 3.167846] sd 7:0:0:0: [sdg] Attached SCSI disk > [ 3.241972] VFIO - User Level meta-driver version: 0.3 > [ 3.259027] Btrfs loaded, crc32c=crc32c-intel > [ 3.355038] BTRFS: device fsid 630137c3-6dd8-416c-b730-f47f99f2701d devid > 1 transid 4833 /dev/sdg1 > [ 3.355966] BTRFS: device label backup devid 1 transid 1611 /dev/sdf1 > [ 3.356572] BTRFS: device fsid 9208425d-8927-4ca1-83f6-a946adb13588 devid > 1 transid 2013825 /dev/sda2 > [ 34.320773] BTRFS info (device sda2): disk space caching is enabled > [ 34.323048] BTRFS info (device sda2): bdev /dev/sda2 errs: wr 0, rd 0, > flush 0, corrupt 14, gen 0 > [ 34.374291] BTRFS info (device sda2): detected SSD devices, enabling SSD > mode > [ 34.533779] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 34.539611] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT > +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT > +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 34.541571] systemd[1]: Detected architecture x86-64. > [ 34.542921] systemd[1]: Set hostname to <fatblock>. > [ 34.619773] systemd[1]: Created slice User and Session Slice. > [ 34.620240] systemd[1]: Listening on Journal Audit Socket. > [ 34.620677] systemd[1]: Listening on /dev/initctl Compatibility Named > Pipe. > [ 34.621425] systemd[1]: Listening on LVM2 poll daemon socket. > [ 34.622267] systemd[1]: Listening on udev Control Socket. > [ 34.623169] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ 34.624114] systemd[1]: Listening on RPCbind Server Activation Socket. > [ 34.638473] BTRFS info (device sda2): disk space caching is enabled > [ 34.641356] loop: module loaded > [ 34.684689] systemd-journald[719]: Received request to flush runtime > journal from PID 1 > [ 34.711403] parport_pc 00:06: reported by Plug and Play ACPI > [ 34.712019] parport0: PC-style at 0x378, irq 5 [PCSPP] > [ 34.724858] EDAC ie31200: No ECC support > [ 34.730477] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 34.731976] cdc_acm 3-6:1.0: ttyACM0: USB ACM device > [ 34.732909] usbcore: registered new interface driver cdc_acm > [ 34.733613] cdc_acm: USB Abstract Control Model driver for USB modems and > ISDN adapters > [ 34.734798] usbcore: registered new interface driver usbserial > [ 34.734837] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops > i915_audio_component_bind_ops [i915]) > [ 34.736233] usbcore: registered new interface driver usbserial_generic > [ 34.737052] usbserial: USB Serial support registered for generic > [ 34.739205] dvb_core: loading out-of-tree module taints kernel. > [ 34.740314] usbcore: registered new interface driver cp210x > [ 34.741348] usbserial: USB Serial support registered for cp210x > [ 34.741383] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 34.741436] sd 2:0:0:0: Attached scsi generic sg1 type 0 > [ 34.741462] sd 3:0:0:0: Attached scsi generic sg2 type 0 > [ 34.741489] sd 4:0:0:0: Attached scsi generic sg3 type 0 > [ 34.741515] sd 5:0:0:0: Attached scsi generic sg4 type 0 > [ 34.741786] sd 6:0:0:0: Attached scsi generic sg5 type 0 > [ 34.741817] sd 7:0:0:0: Attached scsi generic sg6 type 0 > [ 34.747092] cp210x 3-5.1:1.0: cp210x converter detected > [ 34.748047] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 > ms ovfl timer > [ 34.748756] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules > [ 34.749336] usb 3-5.1: cp210x converter now attached to ttyUSB0 > [ 34.749358] cp210x 3-5.2:1.0: cp210x converter detected > [ 34.750412] RAPL PMU: hw unit of domain package 2^-14 Joules > [ 34.750876] RAPL PMU: hw unit of domain dram 2^-14 Joules > [ 34.751056] usb 3-5.2: cp210x converter now attached to ttyUSB1 > [ 34.751850] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules > [ 34.771571] input: PC Speaker as /devices/platform/pcspkr/input/input5 > [ 34.772236] ACPI Warning: SystemIO range > 0x0000000000001828-0x000000000000182F conflicts with OpRegion > 0x0000000000001800-0x000000000000187F (\PMIO) (20170303/utaddress-247) > [ 34.773623] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 34.774281] ACPI Warning: SystemIO range > 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion > 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) > [ 34.775529] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 34.776640] ACPI Warning: SystemIO range > 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion > 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247) > [ 34.778244] ACPI Warning: SystemIO range > 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion > 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) > [ 34.779834] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 34.780890] ACPI Warning: SystemIO range > 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion > 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170303/utaddress-247) > [ 34.783028] ACPI Warning: SystemIO range > 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion > 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170303/utaddress-247) > [ 34.785246] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 34.786390] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 34.800550] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input6 > [ 34.801094] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: > line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line > [ 34.801096] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 > (0x0/0x0/0x0/0x0/0x0) > [ 34.801097] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 > (0x1b/0x0/0x0/0x0/0x0) > [ 34.801097] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 34.801098] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 > [ 34.801099] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 34.801100] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 > [ 34.801101] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 > [ 34.801102] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a > [ 34.809322] input: HDA Intel HDMI HDMI/DP,pcm=7 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input7 > [ 34.809419] Digital Devices PCIE bridge driver 0.9.32, Copyright (C) > 2010-17 Digital Devices GmbH > [ 34.809626] ddbridge 0000:03:00.0: device name: Digital Devices Cine S2 > V6.5 DVB adapter > [ 34.809657] ddbridge 0000:03:00.0: HW 0001000d REGMAP 00010004 > [ 34.809675] ddbridge 0000:03:00.0: link 0 vendor dd01 device 0003 > subvendor dd01 subdevice 0021 > [ 34.813864] input: HDA Intel HDMI HDMI/DP,pcm=8 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input8 > [ 34.814675] input: HDA Intel PCH Front Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 > [ 34.814703] input: HDA Intel PCH Rear Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 > [ 34.814731] input: HDA Intel PCH Line as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 > [ 34.814757] input: HDA Intel PCH Line Out Front as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 > [ 34.814785] input: HDA Intel PCH Line Out Surround as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 > [ 34.814812] input: HDA Intel PCH Line Out CLFE as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 > [ 34.814840] input: HDA Intel PCH Line Out Side as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 > [ 34.814850] input: HDA Intel HDMI HDMI/DP,pcm=9 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input9 > [ 34.814867] input: HDA Intel PCH Front Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 > [ 34.814938] input: HDA Intel HDMI HDMI/DP,pcm=10 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input10 > [ 34.830278] intel_rapl: Found RAPL domain package > [ 34.830279] intel_rapl: Found RAPL domain core > [ 34.830280] intel_rapl: Found RAPL domain uncore > [ 34.830280] intel_rapl: Found RAPL domain dram > [ 34.831535] ppdev: user-space parallel port driver > [ 34.842490] iTCO_vendor_support: vendor-support=0 > [ 34.844431] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 > [ 34.844466] iTCO_wdt: Found a Lynx Point TCO device (Version=2, > TCOBASE=0x1860) > [ 34.844528] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 35.576751] EXT4-fs (dm-0): mounted filesystem with ordered data mode. > Opts: user_xattr > [ 35.593313] EXT4-fs (dm-1): mounted filesystem with ordered data mode. > Opts: user_xattr > [ 36.289534] ddbridge 0000:03:00.0: Port 0: Link 0, Link Port 0 (TAB 1): > DUAL DVB-S2 > [ 36.290028] ddbridge 0000:03:00.0: init link 0, input 0, regs 00000200 > [ 36.290515] ddbridge 0000:03:00.0: init link 0, input 0, handler 8 > [ 36.290991] ddbridge 0000:03:00.0: init link 0, io 0, dma 0, dmaregs > 00000300 bufregs 00002000 > [ 36.291459] ddbridge 0000:03:00.0: init link 0, input 1, regs 00000210 > [ 36.291927] ddbridge 0000:03:00.0: init link 0, input 1, handler 9 > [ 36.292007] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00 > [ 36.293048] ddbridge 0000:03:00.0: init link 0, io 1, dma 1, dmaregs > 00000310 bufregs 00002100 > [ 36.293525] ddbridge 0000:03:00.0: init link 0, output 0, regs 00000280 > [ 36.293993] ddbridge 0000:03:00.0: init link 0, io 0, dma 0, dmaregs > 00000380 bufregs 00002800 > [ 36.295540] ddbridge 0000:03:00.0: Port 1: Link 0, Link Port 1 (TAB 2): > NO MODULE > [ 36.296563] ddbridge 0000:03:00.0: Port 2: Link 0, Link Port 2 (TAB 3): > NO MODULE > [ 36.297557] ddbridge 0000:03:00.0: Port 3: Link 0, Link Port 3 (TAB 4): > NO MODULE > [ 36.297661] ddbridge 0000:03:00.0: 0 netstream channels > [ 36.297662] DVB: registering new adapter (DDBridge) > [ 36.297663] DVB: registering new adapter (DDBridge) > [ 36.309773] r8169 0000:02:00.0: firmware: direct-loading firmware > rtl_nic/rtl8168g-2.fw > [ 36.354101] r8169 0000:02:00.0 eth0: link down > [ 36.354101] r8169 0000:02:00.0 eth0: link down > [ 36.354164] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 36.483584] stv090x_attach: Attaching STV0900 demodulator(1) Cut=0x30 > [ 36.484389] STV0900 version 0x30 > [ 36.489245] LNBx2x attached on addr=a > [ 36.492113] stv6110x_attach: Attaching STV6110x > [ 36.492945] ddbridge 0000:03:00.0: attach tuner input 0 adr 60 > [ 36.493767] ddbridge 0000:03:00.0: DVB: registering adapter 0 frontend 0 > (STV090x Multistandard)... > [ 36.535580] stv090x_attach: Attaching STV0900 demodulator(2) Cut=0x30 > [ 36.536389] STV0900 version 0x30 > [ 36.537478] LNBx2x attached on addr=8 > [ 36.538280] stv6110x_attach: Attaching STV6110x > [ 36.539069] ddbridge 0000:03:00.0: attach tuner input 1 adr 63 > [ 36.539990] ddbridge 0000:03:00.0: DVB: registering adapter 1 frontend 0 > (STV090x Multistandard)... > [ 36.576840] 8021q: 802.1Q VLAN Support v1.8 > [ 36.587148] IPv6: ADDRCONF(NETDEV_UP): eth0.20: link is not ready > [ 36.596388] bridge: filtering via arp/ip/ip6tables is no longer available > by default. Update your scripts to load br_netfilter if you need this. > [ 36.600029] vlan20: port 1(eth0.20) entered blocking state > [ 36.600662] vlan20: port 1(eth0.20) entered disabled state > [ 36.601324] device eth0.20 entered promiscuous mode > [ 36.601956] device eth0 entered promiscuous mode > [ 36.604725] IPv6: ADDRCONF(NETDEV_UP): vlan20: link is not ready > [ 36.615671] IPv6: ADDRCONF(NETDEV_UP): eth0.40: link is not ready > [ 36.620475] br1: port 1(eth0.40) entered blocking state > [ 36.621212] br1: port 1(eth0.40) entered disabled state > [ 36.622055] device eth0.40 entered promiscuous mode > [ 36.624417] IPv6: ADDRCONF(NETDEV_UP): br1: link is not ready > [ 36.634231] br0: port 1(eth0) entered blocking state > [ 36.634782] br0: port 1(eth0) entered disabled state > [ 36.636961] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready > [ 38.864930] r8169 0000:02:00.0 eth0: link up > [ 38.866719] br0: port 1(eth0) entered blocking state > [ 38.868297] br0: port 1(eth0) entered forwarding state > [ 38.870096] vlan20: port 1(eth0.20) entered blocking state > [ 38.871651] vlan20: port 1(eth0.20) entered listening state > [ 38.873390] br1: port 1(eth0.40) entered blocking state > [ 38.874878] br1: port 1(eth0.40) entered listening state > [ 38.876390] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready > [ 53.984506] br1: port 1(eth0.40) entered learning state > [ 53.986476] vlan20: port 1(eth0.20) entered learning state > [ 69.089310] vlan20: port 1(eth0.20) entered forwarding state > [ 69.093249] vlan20: topology change detected, propagating > [ 69.095242] br1: port 1(eth0.40) entered forwarding state > [ 69.097249] br1: topology change detected, propagating > [ 69.099302] IPv6: ADDRCONF(NETDEV_CHANGE): vlan20: link becomes ready > [ 69.101362] IPv6: ADDRCONF(NETDEV_CHANGE): br1: link becomes ready > [ 126.759572] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 126.774129] Ebtables v2.0 registered > [ 1893.789841] Bluetooth: Core ver 2.22 > [ 1893.789873] NET: Registered protocol family 31 > [ 1893.789885] Bluetooth: HCI device and connection manager initialized > [ 1893.789903] Bluetooth: HCI socket layer initialized > [ 1893.789916] Bluetooth: L2CAP socket layer initialized > [ 1893.789932] Bluetooth: SCO socket layer initialized > [ 2012.818753] BTRFS info (device sdf1): disk space caching is enabled > [ 2012.818833] BTRFS info (device sdf1): has skinny extents > [ 6526.725676] BUG: unable to handle kernel NULL pointer dereference at > (null)
No "list_del corruption, blablabla" is shown here, so I guess it's the entry that is NULL, but that's against the list_empty() check above this list_del(). No idea what's it doing. Thanks, -liubo > [ 6526.725703] IP: __list_del_entry_valid+0x0/0x90 > [ 6526.725714] PGD 0 > [ 6526.725715] P4D 0 > > [ 6526.725732] Oops: 0000 [#1] SMP > [ 6526.725741] Modules linked in: bluetooth ecdh_generic rfkill msr > ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter > binfmt_misc cpufreq_userspace cpufreq_powersave cpufreq_conservative bridge > 8021q garp mrp stp llc stv6110x(O) lnbp21(O) stv090x(O) nct6775 hwmon_vid > ext4 crc16 jbd2 fscrypto ecb mbcache iTCO_wdt iTCO_vendor_support ppdev > intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm > crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ddbridge(O) intel_cstate > snd_hda_codec_realtek snd_hda_codec_hdmi cxd2099(O) intel_uncore lpc_ich > snd_hda_codec_generic pcspkr intel_rapl_perf dvb_core(O) sg mfd_core cp210x > usbserial snd_hda_intel cdc_acm snd_hda_codec shpchp snd_hda_core snd_hwdep > snd_pcm snd_timer snd ie31200_edac soundcore mei_me mei battery parport_pc > parport tpm_infineon > [ 6526.725896] evdev intel_smartconnect eeprom coretemp loop ip_tables > x_tables autofs4 btrfs raid10 raid1 raid0 multipath linear vfio_pci > irqbypass vfio_virqfd vfio_iommu_type1 vfio dm_mod raid456 async_raid6_recov > async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq > libcrc32c crc32c_generic md_mod sd_mod uas usb_storage crc32c_intel mxm_wmi > ahci libahci i915 aesni_intel aes_x86_64 crypto_simd cryptd i2c_algo_bit > glue_helper xhci_pci ehci_pci libata drm_kms_helper xhci_hcd ehci_hcd > scsi_mod i2c_i801 r8169 mii usbcore drm usb_common fan thermal wmi video > button > [ 6526.726013] CPU: 0 PID: 5763 Comm: rsync Tainted: G O > 4.12.0-0.bpo.2-amd64 #1 Debian 4.12.13-1~bpo9+1 > [ 6526.726034] Hardware name: MSI MS-7823/H87M-G43 (MS-7823), BIOS V1.9 > 05/30/2015 > [ 6526.726049] task: ffff9dae191d6080 task.stack: ffffbf52032a4000 > [ 6526.726063] RIP: 0010:__list_del_entry_valid+0x0/0x90 > [ 6526.726074] RSP: 0018:ffffbf52032a77e0 EFLAGS: 00010206 > [ 6526.726087] RAX: 0000000000000093 RBX: 0000000000000015 RCX: > ffff9dae191d6080 > [ 6526.726102] RDX: 0000000000000000 RSI: 0000000000000200 RDI: > 0000000000000000 > [ 6526.726117] RBP: ffffffffc0783bc8 R08: 0000000000000008 R09: > ffffffff88715fc0 > [ 6526.726132] R10: ffffffff88715f80 R11: 0000000000000000 R12: > ffffffffc0783720 > [ 6526.726147] R13: ffffffffc0783bb8 R14: 0000000000000008 R15: > ffffffffc0783bd8 > [ 6526.726162] FS: 00007f9c6ac05e80(0000) GS:ffff9dae9ea00000(0000) > knlGS:0000000000000000 > [ 6526.726178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 6526.726191] CR2: 0000000000000000 CR3: 00000000991d8000 CR4: > 00000000001406f0 > [ 6526.726206] Call Trace: > [ 6526.726233] ? find_workspace+0x1de/0x240 [btrfs] > [ 6526.726254] ? btrfs_get_token_64+0x103/0x120 [btrfs] > [ 6526.726274] ? btrfs_decompress+0x2a/0x70 [btrfs] > [ 6526.726294] ? uncompress_inline.isra.59+0xdf/0x139 [btrfs] > [ 6526.726315] ? btrfs_get_extent+0x875/0xbf0 [btrfs] > [ 6526.726899] ? __set_extent_bit+0x3fb/0x590 [btrfs] > [ 6526.727463] ? __do_readpage+0x1a9/0x800 [btrfs] > [ 6526.728026] ? btrfs_releasepage+0x20/0x20 [btrfs] > [ 6526.728588] ? __extent_readpages.constprop.51+0x2ea/0x320 [btrfs] > [ 6526.729171] ? btrfs_releasepage+0x20/0x20 [btrfs] > [ 6526.729754] ? extent_readpages+0x1de/0x200 [btrfs] > [ 6526.730334] ? btrfs_releasepage+0x20/0x20 [btrfs] > [ 6526.730887] ? __alloc_pages_nodemask+0xe1/0x240 > [ 6526.731459] ? alloc_pages_current+0x91/0x140 > [ 6526.732025] ? __do_page_cache_readahead+0x1fe/0x2d0 > [ 6526.732590] ? ondemand_readahead+0x171/0x290 > [ 6526.733151] ? ondemand_readahead+0x171/0x290 > [ 6526.733705] ? pagecache_get_page+0x30/0x220 > [ 6526.734257] ? generic_file_read_iter+0x81c/0x950 > [ 6526.734832] ? cp_new_stat+0x150/0x180 > [ 6526.735390] ? new_sync_read+0xd7/0x120 > [ 6526.735946] ? vfs_read+0x91/0x130 > [ 6526.736482] ? SyS_read+0x52/0xc0 > [ 6526.737010] ? system_call_fast_compare_end+0xc/0x97 > [ 6526.737527] Code: e8 1c 7a e1 ff 0f 0b 48 89 f2 48 89 c1 48 89 fe 48 c7 > c7 78 10 43 88 e8 05 7a e1 ff 0f 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 > <48> 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 39 c8 74 > [ 6526.738592] RIP: __list_del_entry_valid+0x0/0x90 RSP: ffffbf52032a77e0 > [ 6526.739113] CR2: 0000000000000000 > [ 6526.739639] ---[ end trace cdae7e7173d5079a ]--- > -- > To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
