Basic test case which triggers fsstress with dm-log-writes, and then
check the fs after each FUA writes.
With needed infrastructure and special handlers for journal based fs.
Signed-off-by: Qu Wenruo <w...@suse.com>
---
In my test, xfs and btrfs survives while ext4 would report error during fsck.
My current biggest concern is, we abuse $TEST_DEV and mkfs on it all by
ourselves. Not sure if it's allowed.
---
common/dmlogwrites | 119 ++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/481 | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/481.out | 2 +
tests/generic/group | 1 +
4 files changed, 246 insertions(+)
create mode 100755 tests/generic/481
create mode 100644 tests/generic/481.out
diff --git a/common/dmlogwrites b/common/dmlogwrites
index 467b872e..258f5887 100644
--- a/common/dmlogwrites
+++ b/common/dmlogwrites
@@ -126,3 +126,122 @@ _log_writes_cleanup()
$UDEV_SETTLE_PROG >/dev/null 2>&1
_log_writes_remove
}
+
+# Convert log writes mark to entry number
+# Result entry number is output to stdout, could be empty if not found
+_log_writes_mark_to_entry_number()
+{
+ local _mark=$1
+ local ret
+
+ [ -z "$_mark" ] && _fatal \
+ "mark must be given for _log_writes_mark_to_entry_number"
+
+ ret=$($here/src/log-writes/replay-log --find --log $LOGWRITES_DEV \
+ --end-mark $_mark 2> /dev/null)
+ [ -z "$ret" ] && return
+ ret=$(echo "$ret" | cut -f1 -d\@)
+ echo "mark $_mark has entry number $ret" >> $seqres.full
+ echo "$ret"
+}
+
+# Find next fua write entry number
+# Result entry number is output to stdout, could be empty if not found
+_log_writes_find_next_fua()
+{
+ local _start_entry=$1
+ local ret
+
+ [ -z "$_start_entry" ] && _start_entry=0
+ ret=$($here/src/log-writes/replay-log --find --log $LOGWRITES_DEV \
+ --next-fua --start-entry $_start_entry 2> /dev/null)
+ [ -z "$ret" ] && return
+
+ ret=$(echo "$ret" | cut -f1 -d\@)
+ echo "next fua is entry number $ret" >> $seqres.full
+ echo "$ret"
+}
+
+# Replay log range to specified entry
+# $1: End entry. The entry with this number *WILL* be replayed
+# $2: Start entry. If not specified, start from the first entry.
+# $3: Verbose. If set to 'y' do verbose output
+_log_writes_replay_log_entry_range()
+{
+ local _end=$1
+ local _start=$2
+ local _verbose=$3
+
+ [ -z "$_end" ] && _fatal \
+ "end entry must be specified for _log_writes_replay_log_entry_range"
+
+ [ "x$verbose" == "xy" ] && _verbose="-v"
+ [ -z "$_start" ] && _start=0
+ [ "$_start" -gt "$_end" ] && _fatal \
+ "wrong parameter order for
_log_writes_replay_log_entry_range:start=$_start end=$_end"
+
+ # To ensure we replay the last entry, for _start == 0 case,
+ # we need to manually increase the end entry number to ensure
+ # it's played
+ echo "=== replay from $_start to $_end ===" >> $seqres.full
+ $here/src/log-writes/replay-log --log $LOGWRITES_DEV \
+ --replay $SCRATCH_DEV --start-entry $_start \
+ --limit $(($_end - $_start + 1)) $_verbose \
+ >> $seqres.full 2>&1
+ [ $? -ne 0 ] && _fatal "replay failed"
+}
+
+_log_writes_cleanup_snapshot()
+{
+ $UDEV_SETTLE_PROG > /dev/null 2>&1
+ $DMSETUP_PROG remove "$DMLOGWRITES_SNAPSHOT_NAME" > /dev/null 2>&1
+ $DMSETUP_PROG remove "$DMLOGWRITES_ORIGIN_NAME" > /dev/null 2>&1
+}
+
+# Helper to create snapshot of a the replayed device
+# Useful for journal based filesystem such as XFS and Ext4 to replay
+# their journal without touching the replay device, so that we can
+# continue replaying other than replay from the beginning.
+# $1: Snapshot device
+_log_writes_create_snapshot()
+{
+ _require_dm_target snapshot
+
+ local snapshot_dev=$1
+ local cow_base=""
+
+ [ -z "$snapshot_dev" ] && _fatal \
+ "@device must be specified for _log_writes_create_snapshot"
+ local size=$(blockdev --getsz $SCRATCH_DEV)
+ [ -z "$size" ] && _fatal \
+ "failed to get device size for _log_writes_create_snapshot"
+
+ _log_writes_cleanup_snapshot
+
+ DMLOGWRITES_ORIGIN_NAME="log-writes-origin"
+ DMLOGWRITES_SNAPSHOT_NAME="log-writes-snapshot"
+ DMLOGWRITES_ORIGIN_TABLE="0 $size snapshot-origin $SCRATCH_DEV"
+ DMLOGWRITES_SNAPSHOT_TABLE="0 $size snapshot
/dev/mapper/$DMLOGWRITES_ORIGIN_NAME $snapshot_dev N 512"
+
+ $UDEV_SETTLE_PROG >/dev/null 2>&1
+ $DMSETUP_PROG create $DMLOGWRITES_ORIGIN_NAME --table
"$DMLOGWRITES_ORIGIN_TABLE" ||\
+ _fatal "failed to create snapshot-origin of log writes target"
+ $DMSETUP_PROG mknodes > /dev/null 2>&1
+ $UDEV_SETTLE_PROG >/dev/null 2>&1
+ $DMSETUP_PROG create $DMLOGWRITES_SNAPSHOT_NAME --table
"$DMLOGWRITES_SNAPSHOT_TABLE" ||\
+ _fatal "failed to create snapshot of log writes target"
+ $DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_log_writes_mount_snapshot()
+{
+ _scratch_options mount
+ $MOUNT_PROG -t $FSTYP `_common_dev_mount_options $*` $SCRATCH_OPTIONS \
+ "/dev/mapper/$DMLOGWRITES_SNAPSHOT_NAME" $SCRATCH_MNT
+}
+
+_log_writes_unmount_snapshot()
+{
+ $UMOUNT_PROG $SCRATCH_MNT
+}
+
diff --git a/tests/generic/481 b/tests/generic/481
new file mode 100755
index 00000000..3985493d
--- /dev/null
+++ b/tests/generic/481
@@ -0,0 +1,124 @@
+#! /bin/bash
+# FS QA Test 481
+#
+# Test filesystem consistency after each FUA operation
+#
+# Will do log replay and check the filesystem.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2018 SuSE. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ $KILLALL_PROG -KILL -q $FSSTRESS_PROG &> /dev/null
+ _log_writes_cleanup_snapshot &> /dev/null
+ _log_writes_cleanup &> /dev/null
+
+ # We use $TEST_DEV as snapshot COW device, which can't be
+ # mounted/recognized as normal fs, need to recreate it
+ # or fstest will complain about it
+ _mkfs_dev $TEST_DEV > /dev/null 2>&1
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmlogwrites
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_supported_os Linux
+
+_require_command "$KILLALL_PROG" killall
+# Use $TEST_DEV as snapshot CoW device
+_require_test
+# Use $SCRATCH_DEV as replay device
+_require_scratch
+# and we need extra device as log device
+_require_log_writes
+
+
+workload=$(( 512 * $LOAD_FACTOR ))
+nr_threads=$(($($here/src/feature -o) * $LOAD_FACTOR))
+
+_test_unmount
+_log_writes_init
+_log_writes_mkfs >> $seqres.full 2>&1
+_log_writes_mark mkfs
+
+_log_writes_mount
+run_check $FSSTRESS_PROG -w -n $workload -p $nr_threads -d $SCRATCH_MNT \
+ $FSSTRESS_AVOID > /dev/null 2>&1
+_log_writes_unmount
+
+_log_writes_remove
+prev=$(_log_writes_mark_to_entry_number mkfs)
+[ -z "$prev" ] && _fail "failed to locate entry mark 'mkfs'"
+cur=$(_log_writes_find_next_fua $prev)
+[ -z "$cur" ] && _fail "failed to locate next FUA write"
+
+_log_writes_replay_log_entry_range $prev
+while [ ! -z "$cur" ]; do
+ _log_writes_replay_log_entry_range $cur $prev >> $seqres.full
+
+ echo "=== Replay to entry number $cur ===" >> $seqres.full
+ # Here we need extra mount to replay the log, mainly for journal based
+ # fs, as their fsck will report dirty log as error. So do snapshot
+ # to replay, so we can still continue replaying
+ _log_writes_create_snapshot $TEST_DEV
+ _log_writes_mount_snapshot
+ _log_writes_unmount_snapshot
+ _check_generic_filesystem "/dev/mapper/$DMLOGWRITES_SNAPSHOT_NAME"
+ if [ $? -ne 0 ]; then
+ _log_writes_replay_log_entry_range $cur $prev y >> $seqres.full
+ _fail "error found in fsck after log replay"
+ fi
+ _log_writes_cleanup_snapshot
+
+ prev=$cur
+ cur=$(_log_writes_find_next_fua $(($cur + 1)))
+ [ -z "$cur" ] && break
+done
+_log_writes_cleanup_snapshot
+_log_writes_cleanup
+
+# mkfs before ending the test case, or $TEST_DEV doesn't contain any
+# valid fs
+_mkfs_dev $TEST_DEV
+
+echo "Silence is golden"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/481.out b/tests/generic/481.out
new file mode 100644
index 00000000..206e1163
--- /dev/null
+++ b/tests/generic/481.out
@@ -0,0 +1,2 @@
+QA output created by 481
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index ea2056b1..1de053a6 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -483,3 +483,4 @@
478 auto quick
479 auto quick metadata
480 auto quick metadata
+481 auto
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
