Correct me if I'm wrong but I think it means you have a corrupt boot block... rebooting from floppy and running LILO again should solve the problem Nathan Middleton -----Original Message----- From: Vesselin Mladenov <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Monday, November 16, 1998 7:59 PM Subject: LILO >Hi, >I remember that such questions were poseted into admin and config lists some >time ago, but here is my problem: > >I've setup a SuSE Linux 5.3 on i486/33/20MB 522MB HDD, two network adapters >(NE2000 compatible). >It was working fine for two days, but when I reboot it it started to refuse >to boot. >The only thing I see from lilo boot procedure is: "LI" and that's all. >I can boot with bootdisk from fd0 and fsck shows that everything is ok. >I've checked the disk geometry and manufacturer date, BIOS autodetect >and lilo report at boot time (when I boot from fd0) are the same. >I've changed the boot lilo record from /dev/hda to /dev/hda2 (my root >partition), but the result was the same. I've even forse disk in lilo >record, but no results. I've tried with smaller kernel(350kB) - the same results. >Have you any ideas why is this strage behaviour? >I'll appreciate them. > >--------------------------- >Vesselin Mladenov >NetBG Ltd. >Phone: +3592-9744260 >--------------------------- >
