This is a part of my dmesg ... I have a problem with one of my cdrom
(hdd). What can i do to work this cdrom?
Thanx for your time,
Cosmin
---------------------- DMESG ---------------------------------------------
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC36400L, ATA DISK drive
hdb: CREATIVECD3630E, ATAPI CDROM drive
hdc: FUJITSU MPA3043ATU, ATA DISK drive
hdd: probing with STATUS(0xd0) instead of ALTSTATUS(0x50)
hdd: probing with STATUS(0xd1) instead of ALTSTATUS(0x51)
hdd: probing with STATUS(0xd1) instead of ALTSTATUS(0x51)
hdd: E295X, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63, (U)DMA
hdc: FUJITSU MPA3043ATU, 4172MB w/0kB Cache, CHS=9042/15/63, (U)DMA
hdb: ATAPI 32X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.11
hdd: status error: status=0x50 { DriveReady SeekComplete }
hdd: status error: status=0x50 { DriveReady SeekComplete }
hdd: status error: status=0x50 { DriveReady SeekComplete }
hdd: status error: status=0x50 { DriveReady SeekComplete }
hdd: DMA disabled
hdd: ATAPI reset complete
hdd: status error: status=0x00 { }
hdd: status error: status=0x00 { }
hdd: status error: status=0x00 { }
hdd: status error: status=0x00 { }
hdd: ATAPI reset complete
hdd: status error: status=0x00 { }
end_request: I/O error, dev 16:40 (hdd), sector 0
hdd: ATAPI CD-ROM drive, 0kB Cache
