> > > > I am trying to build a small (and cheap) LAN at home that would run a Linux
> > > > box and a Win client. Other 1-2 machines and maybe a printer would be
> > > > expected in near future. Could someone advice on good network cards that
> > > > would be supported by Linux (RedHat 5.2) and I would not have problems with
> > > > on a Win client? Also, some advisory on a hub would be appreciated.
> > > >
> > > I like the 3c509 for 10 speed stuff and the Netgear cards for 100 speed.
> >
> > If you can get them 5.2 will use the 3c905A, better for 10 stuff than the
> > 509 and they're supported by 95,98, and NT. The 905A is less the a
> > hundred dollars. Make sure you do not get a 905B, as far as I know BSD is
> > the only one that supports that card.
>
> Huh? My 2.2.3 kernel would be surprised to hear that. I have a 3c905B card in
> my Pentium 90 Mhz router box, and it works fine (granted I'm not pushing a
> steady stream of 100 Mbit through the wire so there may be capacity issues).
> Here is the /proc/pci entry:
>
> Bus 0, device 15, function 0:
> Ethernet controller: 3Com 3C905B 100bTX (rev 48).
> Medium devsel. IRQ 11. Master Capable. Latency=248. Min Gnt=10.Max Lat=10.
> I/O at 0xf880 [0xf881].
> Non-prefetchable 32 bit memory at 0xffbdfe80 [0xffbdfe80].
>
> I got my 3c509B for ~$80 IIRC. Its more than the Netgear, but I haven't seen
> the end of bitching yet about the non-DEC tulips.
It appears I stand corrected, as of 2.0.36 it was unsupported. Haven't
had the time to upgraded to the new kernel yet.
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
