>>2) about the MODEM_INIT string in /etc/diald/connect.
>>Default is "ATZ&C1&D2%C0": I need to insert the ATX3 command, but
>>"ATX3&C1&D2%C0" fails to initialize the modem; which is the right string ?
>
> You removed the Z from the command: you may need it!
> Does X3 is a command recognized by your modem? If it does, you may want to
> try:
> "ATZX3&C1&D2%C0"
>
> Modem commands vary from one modem to the other: check with your modem
> manual to make sure that you are using the right commands.
You are correct about the variance from one modem to
another. In some cases, modems (including one I am
using) do not accept anything on the AT line after
ATZ -- this might be why the Z was removed.
--
David C. Barnhart II KF4KXM
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
