For several weeks since SuSE 6.1 has been released, I have seen a lot of diald
releated problems. I too am suffering.
I read that perhaps we should be using Diald .99 and I have installed this. Also he
suggests compiling in
ethertap and I have done this.
When I launch Diald, and force it up, diald kicks in and logs in, starts pppd
and then fails soon after.
My diald files are included as is the bits of messages from where i launched
diald until the instigated connection failed.
If anyone out there can help from this point, could you let us all know?
--
Col Wilson -o)
41372 Niederkruechten-Elmpt /\\ -o)
Germany _\_v /\\
_\_v
##############################################################
#/etc/diald.conf
include /root/bin/diald/diald.options
include /usr/lib/diald/standard.filter
#############################################################
#diald.options
device /dev/modem
-m ppp
speed 38400
two-way
#local 127.0.0.3
local 0.0.0.0
remote 195.4.12.1
reroute
defaultroute
dynamic
disconnect-timeout 120
redial-timeout 30
dial-fail-limit 5
fifo /var/run/diald.ctl
connect /root/bin/diald/connect
########################################################################
#!/bin/sh
# connect
`
/usr/sbin/pppd lock connect /root/bin/diald/connect.script#!/bin/sh
#connect.script
MODEM_INIT="ATZ&C1&D2%C0"
PHONE_NUMBER="isp-phone-number"
USER_CHAT_SEQ="login:"
USER_NAME="my-username"
PASSWD_CHAT_SEQ="Password:"
PASSWORD="my-password"
START_ACK="PPP"
function message () {
[ $FIFO ] && echo "message $*" >$FIFO
logger -p local2.info -t connect "$*"
}
message "Initializing Modem"
chat TIMEOUT 5 "" $MODEM_INIT TIMEOUT 45 OK ""
if [ $? != 0 ]; then
message "Failed to initialize modem"
exit 1
fi
message "Dialing system"
chat \
TIMEOUT 45 \
ABORT "NO CARRIER" \
ABORT BUSY \
ABORT "NO DIALTONE" \
ABORT ERROR \
"" ATDT$PHONE_NUMBER \
CONNECT ""
case $? in
0) message Connected;;
1) message "Chat Error"; exit 1;;
2) message "Chat Script Error"; exit 1;;
3) message "Chat Timeout"; exit 1;;
4) message "No Carrier"; exit 1;;
5) message "Busy"; exit 1;;
6) message "No DialTone"; exit 1;;
7) message "Modem Error"; exit 1;;
*)
esac
message "Logging in"
chat \
TIMEOUT 5 \
$USER_CHAT_SEQ $USER_NAME \
TIMEOUT 60 \
$PASSWD_CHAT_SEQ $PASSWORD
if [ $? != 0 ]; then
message "Failed to log in"
exit 1
fi
if [ $PROMPT ]; then
message "Starting Comm Protocol"
chat TIMEOUT 15 $PROMPT $PROTOCOL_START
if [ $? != 0 ]; then
message "Prompt not received"
exit 1
fi
fi
message "Waiting for server to start ppp..."
if [ $START_ACK ]; then
chat TIMEOUT 15 $START_ACK ""
if [ $? != 0 ]; then
message "Failed to start Protocol"
exit 1
fi
fi
# Success!
message "Protocol started"
#############################################################
### OUTPUT FROM /var/log/messages
Jun 24 07:59:42 server login[8520]: ROOT LOGIN on `ttyp0' from `upstairs.wilson.net'
Jun 24 08:02:13 server diald[8567]: Unknown option 'reroute'
Jun 24 08:02:13 server diald[8567]: keepup parsing error. Got token 'tcp.ssl'. Not a
known tcp service port.
Jun 24 08:02:13 server diald[8567]: parse string: 'tcp 120 tcp.dest=tcp.ssl'
Jun 24 08:02:13 server diald[8567]: keepup parsing error. Got token 'tcp.ssl'. Not a
known tcp service port.
Jun 24 08:02:13 server diald[8567]: parse string: 'tcp 120 tcp.source=tcp.ssl'
Jun 24 08:02:13 server diald[8568]: Using fifo /var/run/diald.ctl
Jun 24 08:02:14 server diald[8568]: Proxy device established on interface tap0
Jun 24 08:02:14 server diald[8568]: running '/sbin/ifconfig tap0 0.0.0.0 pointopoint
195.4.12.1 broadcast 0.0.0.0 netmask 255.255.255.255 metric 0 mtu 1500 up'
Jun 24 08:02:14 server diald[8568]: start tap0: SIOCSIFDSTADDR: Cannot assign
requested address
Jun 24 08:02:14 server diald[8568]: start tap0: SIOCSIFBRDADDR: Cannot assign
requested address
Jun 24 08:02:14 server diald[8568]: start tap0: SIOCSIFNETMASK: Cannot assign
requested address
Jun 24 08:02:14 server diald[8568]: start tap0: SIOCSIFMETRIC: Operation not supported
Jun 24 08:02:14 server diald[8568]: SIGCHLD[1]: pid 8569 system, status 256
Jun 24 08:02:14 server diald[8568]: start tap0: Establishing routes for tap0
Jun 24 08:02:14 server diald[8568]: running '/sbin/route add 195.4.12.1 metric 0 dev
tap0'
Jun 24 08:02:14 server diald[8568]: SIGCHLD[2]: pid 8570 system, status 0
Jun 24 08:02:14 server diald[8568]: running '/sbin/route add default metric 0 netmask
0.0.0.0 dev tap0'
Jun 24 08:02:14 server diald[8568]: SIGCHLD[3]: pid 8571 system, status 0
Jun 24 08:02:14 server diald[8568]: Changed snoop device to tap0
Jun 24 08:02:14 server diald[8568]: Diald initial setup completed.
Jun 24 08:02:16 server diald[8568]: /tmp/08572aaa: full monitor connection
Jun 24 08:02:19 server diald[8568]: FIFO: link up request
Jun 24 08:02:19 server diald[8568]: new state CONNECT action 0x80513e0 timeout 120
Jun 24 08:02:19 server diald[8568]: Calling site 195.4.12.1
Jun 24 08:02:21 server diald[8568]: running '/root/bin/diald/connect'
Jun 24 08:02:21 server pppd[8574]: pppd 2.3.5 started by root, uid 0
Jun 24 08:02:21 server connect: Initializing Modem
Jun 24 08:02:21 server connect: Dialing system
Jun 24 08:02:25 server in.telnetd[8580]: connect from [EMAIL PROTECTED]
Jun 24 08:02:43 server login[8581]: invalid password for `root' on `ttyp1' from
`upstairs.wilson.net'
Jun 24 08:02:47 server login[8581]: ROOT LOGIN on `ttyp1' from `upstairs.wilson.net'
Jun 24 08:02:49 server connect: Connected
Jun 24 08:02:49 server connect: Logging in
Jun 24 08:02:52 server connect: Waiting for server to start ppp...
Jun 24 08:02:52 server connect: Protocol started
Jun 24 08:02:52 server pppd[8574]: Serial connection established.
Jun 24 08:02:53 server kernel: ppp_ioctl: set dbg flags to 10000
Jun 24 08:02:53 server kernel: ppp_ioctl: set flags to 10000
Jun 24 08:02:53 server kernel: ppp_tty_ioctl: set xasyncmap
Jun 24 08:02:53 server kernel: ppp_tty_ioctl: set xmit asyncmap ffffffff
Jun 24 08:02:53 server kernel: ppp_ioctl: set flags to 10000
Jun 24 08:02:53 server kernel: ppp_ioctl: set mru to 5dc
Jun 24 08:02:53 server kernel: ppp_tty_ioctl: set rcv asyncmap ffffffff
Jun 24 08:02:53 server kernel: ppp_ioctl: set flags to 10000
Jun 24 08:02:53 server pppd[8574]: Using interface ppp0
Jun 24 08:02:53 server pppd[8574]: Connect: ppp0 <--> /dev/ttyS1
Jun 24 08:02:53 server pppd[8574]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic
0xb1118c1a> <pcomp> <accomp>]
Jun 24 08:02:53 server pppd[8574]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic
0xb1118c1a> <pcomp> <accomp>]
Jun 24 08:02:53 server kernel: ppp: tossing frame (e0)
Jun 24 08:02:55 server kernel: ppp_tty_ioctl: set xmit asyncmap 0
Jun 24 08:02:55 server kernel: ppp_ioctl: set flags to f010003
Jun 24 08:02:55 server kernel: ppp_ioctl: set mru to 5dc
Jun 24 08:02:55 server kernel: ppp_tty_ioctl: set rcv asyncmap 0
Jun 24 08:02:55 server kernel: ppp_ioctl: set flags to f010003
Jun 24 08:02:55 server kernel: ppp_ioctl: set flags to f010043
Jun 24 08:02:55 server kernel: ppp_proto_ccp rcvd=0 code=1 flags=f010043
Jun 24 08:02:55 server pppd[8574]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
0x2201b77f> <pcomp> <accomp>]
Jun 24 08:02:55 server pppd[8574]: sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic
0x2201b77f> <pcomp> <accomp>]
Jun 24 08:02:55 server pppd[8574]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
Jun 24 08:02:55 server pppd[8574]: sent [CCP ConfReq id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Jun 24 08:02:55 server pppd[8574]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 00> <addr
195.4.213.8>]
Jun 24 08:02:55 server pppd[8574]: sent [IPCP ConfRej id=0x1 <compress VJ 0f 00>]
Jun 24 08:02:55 server pppd[8574]: rcvd [IPCP ConfNak id=0x1 <addr 62.104.96.225>]
Jun 24 08:02:55 server pppd[8574]: sent [IPCP ConfReq id=0x2 <addr 62.104.96.225>]
Jun 24 08:02:55 server pppd[8574]: rcvd [LCP ProtRej id=0x3 80 fd 01 01 00 0f 1a 04 78
00 18 04 78 00 15 03 2f]
Jun 24 08:02:55 server kernel: ppp0: ccp closed
Jun 24 08:02:55 server kernel: ppp_ioctl: set flags to f010003
Jun 24 08:02:56 server kernel: ppp_ioctl: set flags to f01000b
Jun 24 08:02:56 server kernel: ppp: set np 0 to 0
Jun 24 08:02:55 server pppd[8574]: rcvd [IPCP ConfReq id=0x2 <compress VJ> <addr
195.4.213.8>]
Jun 24 08:02:55 server pppd[8574]: sent [IPCP ConfRej id=0x2 <compress VJ>]
Jun 24 08:02:55 server pppd[8574]: rcvd [IPCP ConfAck id=0x2 <addr 62.104.96.225>]
Jun 24 08:02:56 server pppd[8574]: rcvd [IPCP ConfReq id=0x3 <addr 195.4.213.8>]
Jun 24 08:02:56 server pppd[8574]: sent [IPCP ConfAck id=0x3 <addr 195.4.213.8>]
Jun 24 08:02:56 server pppd[8574]: local IP address 62.104.96.225
Jun 24 08:02:56 server pppd[8574]: remote IP address 195.4.213.8
Jun 24 08:04:20 server kernel: ppp_ioctl: set flags to f01000b
Jun 24 08:04:20 server kernel: ppp_ioctl: set flags to f01000b
Jun 24 08:04:20 server kernel: ppp_tty_ioctl: set xmit asyncmap ffffffff
Jun 24 08:04:20 server kernel: ppp_ioctl: set flags to f010008
Jun 24 08:04:20 server kernel: ppp_ioctl: set mru to 5dc
Jun 24 08:04:20 server kernel: ppp_tty_ioctl: set rcv asyncmap 0
Jun 24 08:04:20 server kernel: ppp_ioctl: set flags to f010008
Jun 24 08:04:20 server diald[8568]: Connect script timed out. Killing script.
Jun 24 08:04:20 server diald[8568]: new state STOP_DIAL action 0x80515f0 timeout 60
Jun 24 08:04:20 server diald[8568]: Sending SIGINT to (dis)connect process 8573
Jun 24 08:04:20 server pppd[8574]: Terminating on signal 2.
Jun 24 08:04:20 server pppd[8574]: sent [LCP TermReq id=0x2 "User request"]
Jun 24 08:04:20 server pppd[8574]: rcvd [LCP TermAck id=0x4]
Jun 24 08:04:20 server pppd[8574]: Connection terminated.
Jun 24 08:04:20 server kernel: ppp: channel ppp0 closing.
Jun 24 08:04:20 server kernel: ppp0 released
Jun 24 08:04:20 server kernel: ppp0: ccp closed
Jun 24 08:04:20 server diald[8568]: SIGHUP: modem got hung up on.
Jun 24 08:04:21 server pppd[8574]: Exit.
Jun 24 08:04:21 server diald[8568]: SIGCHLD[4]: pid 8573 dial, status 256
Jun 24 08:04:21 server diald[8568]: new state CLOSE action 0x8051be0 timeout -1
Jun 24 08:04:21 server diald[8568]: Closing /dev/modem
Jun 24 08:04:22 server diald[8568]: Delaying 30 seconds before clear to dial.
