Hi Michael Under 2.2 kernel diald could use ether_tap. 1. Compile the kernel with CONFIG_PACKET=m and CONFIG_NETLINK=y 2. In conf.modules: alias net-pf-17 af_packet alias tap0 ethertap option tap0 -o tap0 unit=0 3. Create device tap0 mknod /dev/tap0 c 36 16 4. Start diald compiled with ether_tap support. > -----Urspr�ngliche Nachricht----- > Von: Michael Foong Weng Kong [mailto:[EMAIL PROTECTED]] > Gesendet: Dienstag, 27. Juli 1999 03:51 > An: [EMAIL PROTECTED] > Betreff: > > > Hi all, > > I have worked with diald-0.16 a while back.. and with the new > developments > in diald 2.0/2.2 kernel left we a little dazed and lost. > Therefore its like > starting over again. What used to work with diald and ipfwadm becomes > obsolete. > > So I have tried to install the diald-0.99.1 and kernel 2.2.10 > and kernel > 2.0.34 and at first I get the proxy_tap errors. Then after > compiling it > without proxy_tap (is this ok?) I installed diald and it > seems to diald when > I reboot and after it disconnects it will not bring up the > link again and > says there is xmit call made after link down. > > Anything I have done wrong or do I have to compile proxy_tap > or ether_tap > thingy? > How do I do it? I have checked the FAQ and no go from there. > > Thanx > > from Michael's desk... > > > > - > To unsubscribe from this list: send the line "unsubscribe > linux-diald" in > the body of a message to [EMAIL PROTECTED] > - To unsubscribe from this list: send the line "unsubscribe linux-diald" in the body of a message to [EMAIL PROTECTED]
