I am using the CONFIG Files from the 16.x Version of Diald.
You can find these via an RPM from the RedHat FTP Site:
ftp://ftp.redhat.com/contrib/libc6/i386/diald16-config-0.16.5a-2.i386.rpm
The only changes I made were to the diald.conf file.
The changes were to comment out the first accept line,
uncomment the phone filter, change the Local/Remote IPs,
and the ppp-options name (name for PAP). I also,
made changes to the phone.filter file, but those are
particular to my link-up requirements.
If you are using 99 Diald then you will have to move the
diald.conf file from the /etc/diald directory to the "/etc"
directory (this was a change between old version of
diald and the newer version).
----- Original Message -----
From: Carlos Vermejo <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, November 06, 1999 8:35 PM
Subject: Fwd: Re: diald on RH6.1 - HELP
---------- Mensaje Reenviado ----------
Subject: Re: diald on RH6.1 - HELP
Date: Sat, 6 Nov 1999 19:59:47 -0500
From: Carlos Vermejo <[EMAIL PROTECTED]>
Can you send me your config files for RedHat 6.0?
Your prompt reply will be appreciated.
Best Regards,
Carlos Vermejo
P.D.: I had a problem with the PAP and PPPD when I installed an external
ISDN
modem, I solved including these lines to /etc/conf.modules
alias ppp-compress-1 off
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
Good Luck
El Sat, 06 Nov 1999, rtswguru escribi�:
> >%_Having problems getting DIALD working correctly on RH6.1.
> RH6.1 uses 2.3.10 PPPD. I had DIALD previously working
> on RH6.0, and I am using the same DIALD configuration files.
> I know there have been some significant changes to PPPD
> since the RH6.0 version (don't remember the PPPD Version,
> I think it was 2.3.7), so I am assuming that I am missing
> something for PPPD.
>
> DIALD initiates the dialing, and connection via PPPD. But,
> PPPD terminates the connection. The Errors I am seeing
> in the "messages" file indicate that PPPD can't find a matching
> PAP User for the Remote System.
>
> The PAP User I am providing is the same as I had with RH6.0.
> Additionally, PPPD works apart from DIALD. The PPPD
> Configuration Files are the defaults.
>
> Any suggestions or ideas of what is going on with my CONFIG ?
>
> Thanks,
> Jeff
>
----------------------------------------
Content-Type: text/html; name="unnamed"
Content-Transfer-Encoding: quoted-printable
Content-Description:
----------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
