I've got a really big proble with diald 0.99.1 under Suse6.2
The connection is not giving up :
Nov 9 23:38:12 goyave diald[659]: Trigger: udp
10.0.0.1/1024 192.33.4.12/53
Nov 9 23:38:12 goyave diald[659]: new state CONNECT action 0x8051ed0
timeout 60
Nov 9 23:38:12 goyave diald[659]: Calling site 10.0.0.2
Nov 9 23:38:13 goyave diald[659]: running '/usr/sbin/chat -v -f
/etc/ppp/chat.script'
Nov 9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
134645032 len 63 packet 10.0.0.1,1024 => 128.8.10.90,53
Nov 9 23:38:13 goyave chat[663]: Can't get terminal parameters:
Param�tre invalide
Nov 9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
134645032 len 45 packet 10.0.0.1,1024 => 128.9.0.107,53
Nov 9 23:38:13 goyave diald[659]: SIGCHLD[4]: pid 663 dial, status 512
Nov 9 23:38:13 goyave diald[659]: Connect script failed.
Nov 9 23:38:13 goyave diald[659]: new state CLOSE action 0x80526f0
timeout -1
Nov 9 23:38:13 goyave diald[659]: Closing /dev/modem
Nov 9 23:38:14 goyave diald[659]: Delaying 30 seconds before clear to
dial.
N
my etc/diald.conf is
mode ppp
connect "/usr/sbin/chat -v -f /etc/ppp/chat.script"
device /dev/modem
speed 115200
modem
defaultroute
lock
crtscts
dynamic
local 10.0.0.1
remote 10.0.0.2
debug 31
include /usr/lib/diald/standard.filter
while my chat.script is
REPORT CONNECT
ABORT 'ERROR'
ABORT 'BUSY'
ABORT 'NO CARRIER'
ABORT 'NO DIALTONE'
'' ATZ OK AT&F1 OK ATDTXXXXXXXXXXX CONNECT ''
ogin: XXXXXXXXXX
ssword: XXXXXXXXXX
(route -n is :
root@goyave:~ > route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.1 0.0.0.0 255.255.255.255 UH 1 0 0
dummy
192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
lo
)
can you help me ??
Thanks a lot
Joan Moreau
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
