Well with 'fifo' in /etc/diald.conf, it's work.

But i need to type 
route add default ppp0 
each time diald brings up ppp link.

hown can i avoid that ?

Thanks a lot !

Joan

Joan Moreau wrote:
> 
> I've got a really big proble with diald 0.99.1 under Suse6.2
> The connection is not giving up :
> 
> Nov  9 23:38:12 goyave diald[659]: Trigger: udp
> 10.0.0.1/1024       192.33.4.12/53
> Nov  9 23:38:12 goyave diald[659]: new state CONNECT action 0x8051ed0
> timeout 60
> Nov  9 23:38:12 goyave diald[659]: Calling site 10.0.0.2
> Nov  9 23:38:13 goyave diald[659]: running '/usr/sbin/chat -v -f
> /etc/ppp/chat.script'
> Nov  9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
> 134645032 len 63 packet 10.0.0.1,1024 => 128.8.10.90,53
> Nov  9 23:38:13 goyave chat[663]: Can't get terminal parameters:
> Param�tre invalide
> Nov  9 23:38:13 goyave diald[659]: filter accepted rule 22 proto
> 134645032 len 45 packet 10.0.0.1,1024 => 128.9.0.107,53
> Nov  9 23:38:13 goyave diald[659]: SIGCHLD[4]: pid 663 dial, status 512
> Nov  9 23:38:13 goyave diald[659]: Connect script failed.
> Nov  9 23:38:13 goyave diald[659]: new state CLOSE action 0x80526f0
> timeout -1
> Nov  9 23:38:13 goyave diald[659]: Closing /dev/modem
> Nov  9 23:38:14 goyave diald[659]: Delaying 30 seconds before clear to
> dial.
> N
> 
> my etc/diald.conf is
> mode ppp
> connect "/usr/sbin/chat -v -f /etc/ppp/chat.script"
> device /dev/modem
> speed 115200
> modem
> defaultroute
> lock
> crtscts
> dynamic
> local 10.0.0.1
> remote 10.0.0.2
> debug 31
> include /usr/lib/diald/standard.filter
> 
> while my chat.script is
> REPORT CONNECT
> ABORT 'ERROR'
> ABORT 'BUSY'
> ABORT 'NO CARRIER'
> ABORT 'NO DIALTONE'
> '' ATZ OK AT&F1 OK ATDTXXXXXXXXXXX CONNECT ''
> ogin: XXXXXXXXXX
> ssword: XXXXXXXXXX
> 
> (route -n is :
> root@goyave:~ > route -n
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 192.168.1.1     0.0.0.0         255.255.255.255 UH    1      0        0
> dummy
> 192.168.0.0     0.0.0.0         255.255.0.0     U     0      0        0
> eth0
> 127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0
> lo
> )
> can you help me ??
> 
> Thanks a lot
> 
> Joan Moreau
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]

-- 
Joan Moreau
[EMAIL PROTECTED]
http://www.multimania.com/grosjo/
http://www.polytechnique.org/
ICQ 42001201

"La phrase la plus excitante qu'on peut entendre dans le domaine de la 
recherche qui annonce une grande nouvelle, ce n'est pas 'Eureka!', 
mais plut�t 'Tiens, c'est marrant....'" --Isaac Asimov

-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]

Reply via email to