What does the connect script look like ?
On Mon, 10 Jan 2000, George Mailer wrote:
> I wonder whether someone may have found a fix for this problem - it is not a
> new one ( only for me !).
> I've looked over the archives back a year or so and seen the problem,
> suggestions but no definitive answer.
>
> I am building a new system using RH6 (kernel 2.2.5) & have installed diald /
> ethertap. Diald appears to start up and configure the interfaces correctly
> but chat doesn't seem to talk to the modem.
>
> The chat script works fine when called with ifup ppp0 but diald gives :
>
> chat[2262]: Can't get terminal parameters: Invalid argument
> diald[2254]: Connect script failed.
> diald[2254]: Delaying 10 seconds before clear to dial.
> .......(repeated)
>
> I've really cut down the /etc/diald.conf :-
> ----------------------------------------------------------------------------
> -------------------
> accept any 420 any
> include /usr/lib/diald/standard.filter
> # stuff to set up the diald connection
> mode ppp
> connect "/usr/sbin/chat -v -f /etc/sysconfig/network-scripts/chat-ppp0"
> device /dev/ttyS0
> speed 38400
> crtscts
> modem
> lock
> mode ppp
> dynamic
> local 10.0.0.1
> remote 10.0.0.2
> pppd-options name freeserve
> up-delay 5
> defaultroute
> redial-timeout 10
> fifo /etc/diald/diald.ctl
> ----------------------------------------------------------------------------
> ----
> I saw mention of putting -daemon in /etc/diald.conf but the problem stays
> the same.
>
> The device option is correct /dev/ttyS0 - I also tried it set to
> /dev/modem ( and made a link).
>
> There was a suggestion to change to 0.98 - if anyone can confirm this is a
> known problem
> then I'll have to do this !
>
> Many thanks in advance - regards - George Mailer.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
