I am having diald working properly while connection is initiated from the
machine on which diald resides.
However, when I am trying to bring up the link automatically from a client
request, it won't work as expected.
Here are the routing tables for the client, the diald gateway before a
connection is made and after I bought up the connection from the gateway itself.
Also included is the syslog output in the messages file. I am using RedHat 6.1, but I
don't think it matters much...
BTW, after the link is up, everything works fine for the client to access the
external network using the ppp link.
Any hints or help will be greatly appreciated to solve this issue.
--------------------------------------------------------
Routing table on the diald gateway while the link is down:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.1 * 255.255.255.255 UH 0 0 0 tap0
10.1.1.2 * 255.255.255.255 UH 0 0 0 eth0
10.1.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default * 0.0.0.0 U 0 0 0 tap0
Routing table on the diald gateway while the link is up:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
207.253.206.6 * 255.255.255.255 UH 0 0 0 ppp0
10.1.1.2 * 255.255.255.255 UH 0 0 0 eth0
10.1.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default * 0.0.0.0 U 0 0 0 ppp0
default * 0.0.0.0 U 0 0 0 ppp0
---------------------------------------------------------------
Routing table on the client:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.1.1.1 * 255.255.255.255 UH 0 0 0 eth0
10.1.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default yukawa.cids.ca 0.0.0.0 UG 0 0 0 eth0
syslog output:
*****************************************************************************
Apr 16 13:55:44 yukawa diald[11093]: Using fifo /etc/diald/diald.ctl
Apr 16 13:55:44 yukawa diald[11093]: Proxy device established on interface tap0
Apr 16 13:55:45 yukawa diald[11093]: Diald initial setup completed.
Apr 16 13:56:00 yukawa diald[11093]: Trigger: udp 192.168.0.2/1024
205.151.222.250/53
Apr 16 13:56:00 yukawa diald[11093]: Calling site 192.168.0.1
Apr 16 13:56:01 yukawa connect: Initializing Modem
Apr 16 13:56:02 yukawa connect: Dialing 5145992743
Apr 16 13:56:30 yukawa connect: chat: Apr 16 13:56:30 CONNECT
45333/ARQ/V90/LAPM/V42BIS
Apr 16 13:56:30 yukawa connect: Loggin in
Apr 16 13:56:32 yukawa connect: Starting Comm Protocol
Apr 16 13:56:32 yukawa diald[11093]: connector: /etc/diald/videotron: [: PPP: binary
operator expected
Apr 16 13:56:32 yukawa connect: Protocol started
Apr 16 13:56:32 yukawa diald[11093]: Connected to site 192.168.0.1
Apr 16 13:56:32 yukawa diald[11093]: Running pppd (pid = 11111).
Apr 16 13:56:35 yukawa modprobe: can't locate module char-major-108
Apr 16 13:56:36 yukawa pppd[11111]: pppd 2.3.10 started by root, uid 0
Apr 16 13:56:36 yukawa pppd[11111]: Using interface ppp0
Apr 16 13:56:36 yukawa pppd[11111]: Connect: ppp0 <--> /dev/ttyS1
Apr 16 13:56:39 yukawa pppd[11111]: local IP address 207.253.206.227
Apr 16 13:56:39 yukawa pppd[11111]: remote IP address 207.253.206.6
Apr 16 13:56:40 yukawa diald[11093]: New addresses: local 207.253.206.227, remote
207.253.206.6, broadcast 0.0.0.0
************************************************************************************************************************************
--
Daniel Savard
CIDS Inc.
Courriel: [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
