Hello, > I tried all this of course. What I overlooked and therefore didn't tell in my last >mail: since I > removed the CI from the hauppauge card and moved it over to the siemens card (I read >somewhere about > the problem) the windvb-driver writes a line into /var/log/messages with the code >anytime I press a > key one the remote. But I don't get them within irw.
Sorry friends, I was to stupid, to start the 0.6.5 lircd. There was an older version in the path. > Another problem, which will arise as soon as I get the first solved: The remote >control of the wintv > uses the same codes as that for our tv. Because the remote control for the tv has a >second and third > level for VTR and DVD I hoped, to be able to use them for controlling vdr. But this >codes are not > protocolled in /var/log/messages. AFAIK the lirc.conf comes into action at a later >level, so it > should be of no interest, whether the codes are in it, isn't it? Or is it probable, >that the remote > control uses different codes on different levels? As I read from Matthias Hilbig, this is no problem of my installation but one of the firmware. As far as I can see, the firmware reacts on any device addressed, but delivers the button code only. Would it be possible, to deliver the device code, too. Martin -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
