I'll add the required modifications and to the BSRU6 driver to CVS soon, so just now you'll have to use the patch posted previously for now.
The dvr device will only get a stream if you set up the Demux appropriatly, e.g. by calling
$ szap -r zdf
then let it run in one console and call
$ cat /dev/dvb/adapter0/dvr0 | ts2ps 0x65 0x66 | mplayer -cache 2048 -
in another one.
Holger
chrisb wrote:
After patching the BSRU6 driver szap and scan are working fine:On Saturday 07 December 2002 15:10, Peter Schildmann wrote:If your card is equipped with a Philips SU1278/SH frontend you should try my modified BSRU6 driver.
...
pid 0x11 tid 0x42 id 0x044d, 0/0 (version 10, start 0)
0x044d 0x6de2: pmt_pid 0x07d0 ARD -- Test-R (running, not scrambled)
0x044d 0x6dcb: pmt_pid 0x00c8 ARD -- Bayerisches FS (running, not scrambled)
...
Now I'm trying to display anything without any luck. After reading lots of the mailing list I found commands like
cat /dev/ost/dvr | ts2ps 0x65 0x66 | mplayer -cache 2048 -
which should be
cat /dev/dvb/adapter0/dvr0 | ts2ps 0x65 0x66 | mplayer -cache 2048 -
translated to NEWSTRUCT. But all I get from mplayer is
Playing -
Reading from stdin...
Cache fill: 0.00% (0 bytes)
If I do a 'cat ' on video0, audio0, ca0 or osd0 I get 'No such device' and on vdr0 nothing happens...
lsmod is showing the following modules:
ganzfix:~ # lsmod
Module Size Used by Tainted: P
dvb-ttpci 332240 0 (unused)
evdev 4640 0 (unused)
ves1820 4188 0
grundig_29504-491 4128 0
grundig_29504-401 4264 0
alps_tdlb7 4524 0
alps_tdmb7 4260 0
alps_bsrv2 4376 0
alps_bsru6 6704 1
dvb-core 41348 3 [dvb-ttpci ves1820 grundig_29504-491 grundig_29504-401 alps_tdlb7 alps_tdmb7 alps_bsrv2 alps_bsru6]
videodev 6112 0 [dvb-ttpci]
Is there a module missing or do you have any further hints?
TIA
Chris
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
