Hello, On Tue, 25 Nov 2003, Nico wrote:
>You don't need dvbtune, only dvbstream >./dvbstream -f 657833 .... -o 6210 | ts2es 6210 | mpg123 - > >Change ... with the other tuning parameters, if needed: inversion, bandwidth, >modulation, coderate, >guard interval and hyerarchy; all of them have default values, but not always they are >correct for every transmitter. Thanks for the tip on tuning in the frequency with dvbstream. That skips a step that I was taking! When using dvbstream (V 0.4Pre3) (like dvbtune), I can not seam to have success tuning into the transponder on the first try. That is to say when I execute: > dvbstream -f 633833 -o 201 202 I get the following error after 10 seconds: Using DVB card "Philips TDA10045H" tuning DVB-T (in United Kingdom) to 657833000 Hz polling.... Getting frontend event FE_STATUS: FE_TIMEDOUT Not able to lock to the signal on the given frequency However, if I execute dvbstream twice in a row like: > dvbstream -f 633833 -o 201 202 ; dvbstream -f 633833 -o 201 202 I get the following: Using DVB card "Philips TDA10045H" tuning DVB-T (in United Kingdom) to 657833000 Hz polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 3600 Signal strength: 52942 SNR: 65278 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Wed Nov 26 15:25:23 GMT 2003 Is there something I can do to make this work properly on the first execution? Also, is there a way to reduce the 10 seconds of delay? That is a long time between changing channels! I also can not get libdvb-0.5.2 to compile. When I run the make -s I get the following error: DVB.cc: In method `int DVB::SetFullFilter(short unsigned int = NOPID)': DVB.cc:1591: `DMX_FULL_TS_PID' undeclared (first use this function) DVB.cc:1591: (Each undeclared identifier is reported only once DVB.cc:1591: for each function it appears in.) make[1]: *** [DVB.o] Error 1 make: *** [libdvb/libdvb.a] Error 2 Does anyone know how I can fix this and make it compile? Also, I am trying to use the "ts2es" mpeg-utility in there to assist with piping a TS output stream to mpg123, and can not see "ts2es" anywhere in the libdvb-0.5.2 files. Has the "ts2es" utility been renamed? thanks for the help, Monty -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
