[EMAIL PROTECTED] wrote:
Hello,
On Tue, 25 Nov 2003, Nico wrote:
You don't need dvbtune, only dvbstream ./dvbstream -f 657833 .... -o 6210 | ts2es 6210 | mpg123 -
Change ... with the other tuning parameters, if needed: inversion, bandwidth, modulation, coderate,
guard interval and hyerarchy; all of them have default values, but not always they are
correct for every transmitter.
Thanks for the tip on tuning in the frequency with dvbstream. That skips a step that I was taking!
When using dvbstream (V 0.4Pre3) (like dvbtune), I can not seam to have success tuning into the transponder on the first try. That is to say when I execute:
dvbstream -f 633833 -o 201 202
I get the following error after 10 seconds:
Using DVB card "Philips TDA10045H" tuning DVB-T (in United Kingdom) to 657833000 Hz polling.... Getting frontend event FE_STATUS: FE_TIMEDOUT Not able to lock to the signal on the given frequency
However, if I execute dvbstream twice in a row like:
dvbstream -f 633833 -o 201 202 ; dvbstream -f 633833 -o 201 202
I get the following:
Using DVB card "Philips TDA10045H" tuning DVB-T (in United Kingdom) to 657833000 Hz polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 3600 Signal strength: 52942 SNR: 65278 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Wed Nov 26 15:25:23 GMT 2003
Is there something I can do to make this work properly on the first execution?
Also, is there a way to reduce the 10 seconds of delay? That is a long
time between changing channels!
I don't know, maybe some -T user can help you. What driver are you using? Try the other :)
I also can not get libdvb-0.5.2 to compile. When I run the make -s I get the following error:
DVB.cc: In method `int DVB::SetFullFilter(short unsigned int = NOPID)': DVB.cc:1591: `DMX_FULL_TS_PID' undeclared (first use this function) DVB.cc:1591: (Each undeclared identifier is reported only once DVB.cc:1591: for each function it appears in.) make[1]: *** [DVB.o] Error 1 make: *** [libdvb/libdvb.a] Error 2
Does anyone know how I can fix this and make it compile?
insert #define DMX_FULL_TS_PID 0x2000 at the top of DVB.cc
Also, I am trying to use the "ts2es" mpeg-utility in there to assist with
piping a TS output stream to mpg123, and can not see "ts2es" anywhere in
the libdvb-0.5.2 files. Has the "ts2es" utility been renamed?
thanks for the help,
Monty
it's a symlink to dvb-mpegtools when it's successfully compiled
-- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
