Eg using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' initial transponder 722000000 0 2 9 3 1 2 0 initial transponder 578000000 0 2 9 3 1 2 0 initial transponder 730000000 0 2 9 3 1 2 0 initial transponder 762000000 0 2 9 3 1 2 0 >>> tune to: 722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 722000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done.
On 10/5/07, Henrik Beckman <[EMAIL PROTECTED]> wrote: > > No DVB-T should be below 474MHz in Sweden, it´s more like there doesn´t > exist any signal on the stick, either reception in linux is extremly bad > compared to windows or something has changed on the inside of the Nova-TD > stick, or the stick is quirky. > w_scan doesn´t find anything, tzap with the nova-t 500 channels.confdoesn´t > find anything. > I´ll try with kaffeine and create and a brand new channesl.conf consisting > of only auto values and see if I can find and recive something. > > > /Henrik > > On 10/5/07, Patrick Boettcher <[EMAIL PROTECTED]> wrote: > > > > On Thu, 4 Oct 2007, Henrik Beckman wrote: > > > > > Hi, > > > > > > I´ve posted some yesterday and I´ve done some more poking around and > > it just > > > doesn´t find any signal in linux > > > I´ve tried with two different antenna feeds who both works with > > windows, if > > > I spilt my primary feed I can still run the t-500 PCI card > > > but no matter what the TD stick never finds anything. > > > > The current driver even in latest hg has no VHF support meaning it does > > not support frequencies below 470 MHz. > > > > I have a patch pending - if I will find the time, I will commit it later > > that day. > > > > Patrick. > > > > -- > > Mail: [EMAIL PROTECTED] > > WWW: > > http://www.wi-bw.tfh-wildau.de/~pboettch/<http://www.wi-bw.tfh-wildau.de/%7Epboettch/> > > >
_______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb