On 19 Φεβ 2008, at 2:52 ΜΜ, Igor wrote: >>>> My goal is to get this card to tune to a DVB-S2 transponder, more >>>> specifically this one: >>>> http://en.kingofsat.net/tp.php?tp=2656 >>>> I have a dish with 4 LNBs connected to the HVR4000 through a DiSEqC >>>> 1.0 4x1 switch. >>>> The 4th LNB is pointed to this satellite and I can tune to DVB-S >>>> transponders there just fine with another card as well as this one >>>> (more on that later). >>>> >>>> I assume multiproto is necessary for DVB-S2 tuning to actually >>>> work. >>>> Right? >>> >>> yes, right. Latest version of multiproto will help you. >> >> Thanks. Since I asked this in the first place, let me put it another >> way: >> Currently there is no other way to get DVB-S2 tuning, other than >> going >> with the multiproto tree, such as a patch-set for the main hg tree? > > there's other way - the hvr4000-patches from Darron Broad for > current hg tree > http://dev.kewl.org/hauppauge/
As I wrote in my first mail, I also tried those (more specifically the sfe patch), but it didn't work for S2 (DVB-S worked with 2.6.22): > I have also tried the patches from http://dev.kewl.org/hauppauge/ > against the v4l-dvb tree. The patches didn't apply cleanly with the > current tip. I had to go back to 7192 (b6e3eee46ca2) to apply the > 2008-02-07 sfe patch. Compiled for 2.6.22, DVB-S works, with the > default sysctl value of dev.cx24116.modfec=0xfe30. After setting > dev.cx24116.modfec=0x0d I can no longer scan a DVB-S or a DVB-S2 > transponder. With 2.6.24 neither of the above works. Is there something else I am missing? Thanks! _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
