On 19 Φεβ 2008, at 5:07 ΜΜ, Zenon Mousmoulas wrote: > > On 19 жЕБ 2008, at 4:59 лл, Igor wrote: > >>>> could you show the szap2 output during dvb-s2 tuning >>> >>> I just tried it again with 2.6.22: >>> >>> tvbox2:~# szap2 -r -t2 -e3 -m8 -c tvbox_dvb/zap/dvb-s/ >>> diseqc4_HellasSat2-39.0E.new LUXETV >>> reading channels from file 'tvbox_dvb/zap/dvb-s/ >>> diseqc4_HellasSat2-39.0E.new' >>> zapping to 2 'LUXETV': >>> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, >>> apid = 0x0bc6 sid = 0x012d (fec = 64, mod = 8) >>> Querying info .. Delivery system=DVB-S2 >>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>> ioctl DVBFE_GET_INFO failed: Operation not supported >>> >>> I will try it again shortly with 2.6.24. >> >> try to use the usual szap, not szap2 > > I already did. It didn't work... > > tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new > LUXETV > reading channels from file 'tvbox_dvb/zap/dvb-s/ > diseqc4_HellasSat2-39.0E.new' > zapping to 2 'LUXETV': > sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, > apid = 0x0bc6 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | > status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | > status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | > status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | > status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | > status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 | > status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | > status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
And with 2.6.24: tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new LUXETV reading channels from file 'tvbox_dvb/zap/dvb-s/ diseqc4_HellasSat2-39.0E.new' zapping to 2 'LUXETV': sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3, apid = 0x0bc6 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 | Something particularly important: szap is from the Debian dvb- utils-1.1.1-3 package. Is there a requirement for a particular version of dvb-apps? Thanks, Z. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
