Hi, thanks for your answer. I started my client with the boot cd-rom and then checked that they are files in /dev, and yes, I can see all the devices (regarding hard drive I've got hdx and sdx)
Kernel version : 2.6.16-fai-kernels #1 smp My hardware : I'm using an amd 64 3000+ with a gigabyte motherboard : 10de005e-nVidia CorporationCK804 Memory Controller 10de0050-nVidia CorporationCK804 ISA Bridge 10de0052YesnVidia CorporationCK804 SMBusi2c-nforce2 10de005a-nVidia CorporationCK804 USB Controller 10de005b-nVidia CorporationCK804 USB Controller 10de0059YesnVidia CorporationCK804 AC97 Audio Controller97 Audio Controllersnd-intel8x0,i810_audio 10de0053YesnVidia CorporationCK804 IDEamd74xx 10de0054YesnVidia CorporationCK804 Serial ATA Controllersata_nv 10de0055YesnVidia CorporationCK804 Serial ATA Controllersata_nv 10de005c-nVidia CorporationCK804 PCI Bridge 10de0057YesnVidia CorporationCK804 Ethernet Controllerforcedeth 10de005d-nVidia CorporationCK804 PCIE Bridge 10de005d-nVidia CorporationCK804 PCIE Bridge 10de005d-nVidia CorporationCK804 PCIE Bridge 10de005d-nVidia CorporationCK804 PCIE Bridge 10221100-Advanced Micro Devices [AMD]K8 [Athlon64/Opteron] HyperTransport Technology Configuration 10221101-Advanced Micro Devices [AMD]K8 [Athlon64/Opteron] Address Map 10221102-Advanced Micro Devices [AMD]K8 [Athlon64/Opteron] DRAM Controller 10221103-Advanced Micro Devices [AMD]K8 [Athlon64/Opteron] Miscellaneous Control 10110024YesDigital Equipment CorporationDECchip 21152ignore 104c8025-Texas InstrumentsTSB82AA2 IEEE-1394b Link Layer Controller 10110019YesDigital Equipment CorporationDECchip 21142/43tulip,de4x5 10110019YesDigital Equipment CorporationDECchip 21142/43tulip,de4x5 10110019YesDigital Equipment CorporationDECchip 21142/43tulip,de4x5 10110019YesDigital Equipment CorporationDECchip 21142/43tulip,de4x5 10de01df-nVidia Corporationno information What I don't understand is why it is the same thing for an ide and sata file ? It is like the modules are not loading ? thanks for your help ;-) JPB Le mardi 25 juillet 2006 à 18:59 +0200, Michael Tautschnig a écrit : > > Hi, > > > > I contact you because I just can't make fai detecting my hard drives. > > I have made some tests with a 160 Go SATA disk and then with an ide 40 > > Go disk and fai can't find my hard drive : > > Probing disks : > > Disks found : > > > > Using config file: /fai/disk_config/FAIBASE > > ERROR: could not read device /dev/ > > Mapping disk name disk1 to > > ... > > > > I have read some posts on the archive and tried to make changes to > > 20-hwdetect.source regarding ata_piix and other things without success. > > > > Do you have udev running or are there all files in /dev/, but the disk is just > noch detected? > > In any case, it is not setup_harddisks' task, but the script's in class/ > > Important information you should supply is: > - Your hardware > - the kernel version > > HTH, > Michael >