Hi,

only for information : 
It works fine now, it was just due to the fact that on chili1 , gfs2-utils 
rpm was not installed,
and it is strange that I succeeded to mount the FS gfs2 without this rpm 
installed which 
install /sbin/mount.gfs2 ...
And perhaps just a dependancy is missing in rpm 
gfs-pcmk-3.0.12-23.el6.Bull.1.x86_64 on gfs2-utils.

Regards
Alain




De :    alain.mou...@bull.net
A :     linux-ha@lists.linux-ha.org
Date :  13/09/2011 08:59
Objet : [Linux-HA] What's wrong in my configuration for GFS2 under 
Pacemaker ?
Envoyé par :    linux-ha-boun...@lists.linux-ha.org



Hi,

( Pacemaker 1.1.2.7 on RHEL6 )

I just tried to configure a GFS2 Filesystem under Pacemaker, but
the FS is always mounted only on one side, not both sides :

Clone Set: dlm-clone [dlm]
     Started: [ chili0 chili1 ]
 Clone Set: gfs-clone [gfs-control]
     Started: [ chili0 chili1 ]
 Clone Set: fsGFS2 [fs-GFS2]
     Started: [ chili1 ]
     Stopped: [ fs-GFS2:0 ]

and after a while the node chili0 where the FS mount fails is fenced by 
chili1

Is there something missing or wrong in my configuration below ?
or is there an already known issue on this subject ?
Thanks
Alain Moullé

My configuration around gfs2 items:
node chili0
node chili1
primitive dlm ocf:pacemaker:controld \
        op start interval="0" timeout="90s" \
        op stop interval="0" timeout="100" \
        op monitor interval="120s"
primitive fs-GFS2 ocf:heartbeat:Filesystem \
        params device="/dev/sdl" directory="/mnt/gfs2" fstype="gfs2" \
        op start interval="0" timeout="60" \
        op stop interval="0" timeout="60" \
        op monitor interval="20" timeout="40" \
primitive gfs-control ocf:pacemaker:controld \
        params daemon="gfs_controld.pcmk" args="-g 0" \
        op monitor interval="120s" \
        op start interval="0" timeout="90s" \
        op stop interval="0" timeout="120s"
clone dlm-clone dlm \
        meta interleave="true"
clone fsGFS2 fs-GFS2
clone gfs-clone gfs-control \
        meta interleave="true"
colocation gfs-with-dlm inf: gfs-clone dlm-clone
order start-gfs-after-dlm inf: dlm-clone gfs-clone


_______________________________________________
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems

_______________________________________________
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://linux-ha.org/ReportingProblems

Reply via email to