Re: PI2 card grief

[David Brooke]

In article <[EMAIL PROTECTED]>,
        [EMAIL PROTECTED] (Klaus Kudielka) writes:
> They usually _do_ work with 386 and 486 systems. They don't work with some
> Pentium systems (and in that case, only DMA TX fails) because the timing of

I recently tried to enable DMA on my Packetwin (only running at 9600 baud
just to see if it worked) but it failed with these same symptoms. It's
a 486 with VLB and I think the DMA is done by a PC Chips integrated
controller.

Dave