According to Luis Yanes: While burning my CPU.
>
> Here is my problem, when I type sccinit simply got the prompt again.
> No errors, no messages, no logs, and a second call to sccinit are
> exactly like the first, without complaints. That is why I'm going mad!
>
> The sccinit that come with z8530drv-2.4c has the Id string:
> RCS_ID "$Id: sccinit.c,v 1.7 1995/11/17 01:10:17 jreuter Exp jreuter $"
>
> A missing /etc/z8530drv.conf file don't generate any error.
> I've checked the sccinit source, and the config file is opened
> with: fp = fopen(CONFIGFILE,"r"); , but after this isn't checked
> if was sucessfully.
>
> Althought if I write strange characters in /etc/z8530drv.conf
> sccinit complains about these correctly.
> After adding some printf's I'm sure sccinit are being executed.
Then possably your /etc/z8530drv.conf is missing some details about adresses
and irq or the likes.
>
> But I noticed that /usr/src/z8530drv-2.4/sccinit byte size are
> greater than /sbin/sccinit, being both the just rebuilt executables.
> Why happens this?
>
> A message like above are what I was expecting to read in the log
> like before I upgraded!
>
> I even removed the board, and its the same.
> --
> 73's de Luis
>
> mail: [EMAIL PROTECTED]
> Ampr: eb7gwl.ampr.org (sorry shut down)
> AX25: (sorry shut down)
> http://www.esi.us.es/~melus/ <- Homebrewed Hardware Projects with PCBs
>
--
Regards Richard.
[EMAIL PROTECTED]
