Yeah, I had the same problem -- and I put the connection into
mic in -- and now it works. Not sure why, but there you go.
Hamish Moffatt wrote:
>
> I'm trying to use an old sbpro for packet. It transmits OK, but
> never receives anything. I don't here the audio from line in on the
> output either.
>
> smmixer refuses to set anything except the output gain and the input
> selection (the manual page says this is all that is supported).
> I find this a bit strange, I think a lot more mixer settings were supported
> on that card. Running smmixer says
>
> smmixer: Version 0.2; (C) 1996-1997 by Thomas Sailer HB9JNX/AE4WA
> Input source: Line
> Master volume: Left: -6dB Right: -6dB
> Voice volume: Left: 0dB Right: 0dB
> MIDI volume: Left: -46dB Right: -46dB
> CD volume: Left: -46dB Right: -46dB
> Line volume: Left: -46dB Right: -46dB
> Mic mixing volume: -46dB
>
> With line input at -46 that's probably why I don't hear anything.
> Any ideas? I might swap it for an SB mono card I have lying around,
> if necessary.
>
> thanks
> Hamish VK3SB
> --
> Hamish Moffatt Mobile: +61 412 011 176 [EMAIL PROTECTED]
> Rising Software Australia Pty. Ltd. http://www.risingsoftware.com/
> Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA: 1 888 667 7839
--
http://junglevision.com
