This series introduces a driver for the Silergy SY7802 charge pump used in the BQ Aquaris M5 and X5 smartphones.
The implementation is based on information extracted from downstream as the datasheet provided by a distributor of the hardware didn't include any information about the i2c register description. Signed-off-by: André Apitzsch <[email protected]> --- Changes in v2: - bindings: remove unneeded allOf - bindings: example: move flash-led-controller under i2c node to fix check error - Cc to phone-devel - Link to v1: https://lore.kernel.org/r/[email protected] --- André Apitzsch (3): dt-bindings: leds: Add Silergy SY7802 flash LED leds: sy7802: Add support for Silergy SY7802 flash LED controller arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash .../devicetree/bindings/leds/silergy,sy7802.yaml | 100 ++++ .../boot/dts/qcom/msm8939-longcheer-l9100.dts | 26 + drivers/leds/flash/Kconfig | 11 + drivers/leds/flash/Makefile | 1 + drivers/leds/flash/leds-sy7802.c | 532 +++++++++++++++++++++ 5 files changed, 670 insertions(+) --- base-commit: a6bd6c9333397f5a0e2667d4d82fef8c970108f2 change-id: 20240325-sy7802-f40fc6f56525 Best regards, -- André Apitzsch <[email protected]>
