From: Claudiu Beznea <[email protected]> Add USB nodes for the Renesas RZ/G3S SoC. This consists of PHY reset, host and device support.
Signed-off-by: Claudiu Beznea <[email protected]> --- Changes in v3: - changed the nodes order to keep similar nodes toghether Changes in v2: - this was patch 14/16 in v1 - added renesas,sysc-signal properties to USB PHYs - collected tags - Geert: I kept your tag; please let me know if you consider otherwise arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 120 +++++++++++++++++++++ 1 file changed, 120 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 0364f89776e6..e329c55c3fad 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -681,6 +681,126 @@ eth1: ethernet@11c40000 { status = "disabled"; }; + phyrst: usbphy-ctrl@11e00000 { + compatible = "renesas,r9a08g045-usbphy-ctrl"; + reg = <0 0x11e00000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>; + resets = <&cpg R9A08G045_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + renesas,sysc-signals = <&sysc 0xd70 0x1>; + status = "disabled"; + + usb0_vbus_otg: regulator-vbus { + regulator-name = "vbus"; + }; + }; + + ohci0: usb@11e10000 { + compatible = "generic-ohci"; + reg = <0 0x11e10000 0 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11e30000 { + compatible = "generic-ohci"; + reg = <0 0x11e30000 0 0x100>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11e10100 { + compatible = "generic-ehci"; + reg = <0 0x11e10100 0 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11e30100 { + compatible = "generic-ehci"; + reg = <0 0x11e30100 0 0x100>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11e10200 { + compatible = "renesas,usb2-phy-r9a08g045"; + reg = <0 0x11e10200 0 0x700>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + #phy-cells = <1>; + power-domains = <&cpg>; + renesas,sysc-signals = <&sysc 0xd70 0x1>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11e30200 { + compatible = "renesas,usb2-phy-r9a08g045"; + reg = <0 0x11e30200 0 0x700>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + #phy-cells = <1>; + power-domains = <&cpg>; + renesas,sysc-signals = <&sysc 0xd70 0x1>; + status = "disabled"; + }; + + hsusb: usb@11e20000 { + compatible = "renesas,usbhs-r9a08g045", + "renesas,rzg2l-usbhs"; + reg = <0 0x11e20000 0 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + gic: interrupt-controller@12400000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; -- 2.43.0
