Linux-Hardware Digest #642, Volume #10 Thu, 1 Jul 99 15:13:41 EDT
Contents:
Re: Monitor dies while installing Redhat 5.2 (Barry Smith)
xwave 3000 ([EMAIL PROTECTED])
Re: Where is MAKE ??? ([EMAIL PROTECTED])
Re: Many serial ports for Linux ("Tony Platt")
Re: Problem configuring PCMCIA Network card ("Max Barawid Jr.")
SCSI Bus Timeout / Systems locks up (Scott W. Petersen)
Re: SGI Visual Workstation 540 and Qlogic 1080.... (Phil LoCascio)
Re: Best sound card for use w/ Linux? (Jeremy Crabtree)
Re: Best PCI Soundcard? (Tabman)
Re: [Q:] Format Jaz on Sun, read on Linux (Alex Yung)
Re: Need Iomega Ditto 3200 (3.2G) Tape Drive info (Ron Gibson)
Re: Adaptec 2940 UW SCSI Problem ("Andrew J. Norman")
Lexmark 3200 and Linux (Joker)
Permedia-based RealVision Power 3DGL Graphis adapter and RH Linux 6 ("richardmette")
----------------------------------------------------------------------------
From: Barry Smith <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.advocacy
Subject: Re: Monitor dies while installing Redhat 5.2
Date: Thu, 1 Jul 1999 17:16:47 +0100
Reply-To: [EMAIL PROTECTED]
On Wed, 30 Jun 1999, Bones <[EMAIL PROTECTED]> wrote:
>Some points...
>
>I've worked with some older Acers, Packard-Bells and IBMs with
>integrated video adapters. I'm sure there's more, so it's quite
>possible.
>>Right now hardware is super cheap and you can build yourself a large
>>distributed network of SMP machines with tremendous amounts of memory
>>for very little money...
Precisely why I don't want to waste any more on equipment that ought to
be retired.
>
>Better hurry, I'm starting to have trouble getting anything new that's
>not AGP! It was great when I could get a Trident-chipset PCI card with
>2MB DRAM for under $20.
>
>
>>Barry Smith wrote:
>>
>>> Thanks for your long answer. The problems are: I don't have a spare
>>> video card;
>
>I might Barry, if that's what it comes down to.
>(Oop! Sorry, it's a VLB card. I believe Dell used their own
>implementation of local-bus video on some of their 386 machines, and
>if not that, then ISA.)
Hmm ... If you have problems getting PCI then how can I find VLB or ISA?
I will have to get in touch with Dell Support to find out what bus I
have.
>>> I don't want to buy one as I intend to buy new kit soon, and
>>> just wanted to practice the installation; and I don't know how to turn
>>> off the video on the mother board.
>
>Damn cheapo motherboard. No jumper settings silk-screened on it, eh?
Not that I have seen.
>Well, I think everyone is working with the assumption that the
>integrated video card is going bad, which sounds plausible to me. I
>haven't run into any older systems that will function correctly with
>two video adapters installed, so you'd have to disable the old one to
>make the computer function with a replacement. Plus, if the card is
>stealing RAM for its own use, you'll be wasting it when it could be
>put to better use elsewhere (assuming it's taking a decent amount).
>
>A short while ago you said...
>>> I have tried booting from the install floppy in default and expert mode
>>> but each time the monitor dies, and the light that indicates connection
>>> with the PC extinguishes. This happens soon after I press ENTER from the
>>> welcome screen...
>
>What this sounds like is that the video card (or monitor) can't
>produce output for a certain video mode. This could indicate that:
>
>A) The card is producing a signal that's way, way out of the monitor's
>range.
What could this be? I can run at 1027x768 pixels in 256 bit colour, or
1280x1024 in 16 bit colour? And isn't this a stupid thing to do? ie try
and run something exotic before checking the capabilities of the
hardware? Why not start in VGA?
Is there no switch I can apply to tell it not to be so silly?
>B) There's a problem with the logic on the video card with whatever
>mode it's attempting to switch to (it might not even be producing any
>sync signals if the monitor is 'going to sleep')
>
>C) There's a problem with the software that's driving it.
>
>(I've also seem problems where the memory that the card is using goes
>bad, but this usually produces corrupted displays; not the symptom
>we're looking at.)
>
>I'd also like to note (I'm guessing, I haven't installed RH5.2
>personally) that perhaps it's trying to display a banner, and it
>attempts to switch the video to SVGA mode with a sync that the monitor
>can't handle, or that the video card can't handle because it's broken.
So far as I am aware nothing is broken. All the modes that I allowed to
run in Windows function normally. Perhaps I should contact RedHat
support and tell them what is happening.
Thanks for your continued help.
--
Barry Smith
Email: sax (at) wychcraft.demon.co.uk <-- I don't want ANY spam!
------------------------------
From: [EMAIL PROTECTED]
Subject: xwave 3000
Date: Thu, 01 Jul 1999 17:11:47 GMT
how do you set up the xwave 3000 sound board in
rh6 ?
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Where is MAKE ???
Date: 1 Jul 1999 16:20:16 GMT
eric chazase <[EMAIL PROTECTED]> did eloquently scribble:
= I am trying to setup a network card on my computer, because i need it to
= connect to the internet. I've tried it at first with a Mandrake 6, and then
= with a RedHat 6.
= I'm a begginner, and the only way to do so i've figured out with the how-to
= needed to use the 'make' command. (make menuconfig).
= But the bash shell tells me that it doesn't know that command, and 'man
= make' gives the same result.
= This file is supposed to be in usr/src/linux.
The Makefile is, but mif you haven't included the make command from the
installation medium, you can't do anything much with the kernel.
Check what you installed (I take it you used Cds) and install make if you
hadn't already.
= In mandrake 6, this directory doesn't even existe, and in the redhat distrib
= it has a slitly differente name.
It only exists if you choose to install the specific packages needed.
I only use SuSE, and have never seen a Debian install, but many packages are
optional, and not vital to the running of the system. The kernel source is
one of these. It may be that you just overlooked it.
= Anyway, I did a search on the hole Hard disk, with no results
Search the CDROM. You'll find it on there.
--
_____________________________________________________________________________
|[EMAIL PROTECTED]| "This is the voice of the Mysterons..... |
| Andrew Halliwell Bsc | I'm afraid no-ones in at the moment, but if |
| in | you leave your rank and colour, we'll destroy |
| Computer Science | you as soon as we get back. - The Preventers |
=============================================================================
|GCv3.12 GCS>$ d-(dpu) s+/- a C++ US++ P L/L+ E-- W+ N++ o+ K PS+ w-- M+/++|
|PS+++ PE- Y t+ 5++ X+/X++ R+ tv+ b+ DI+ D+ G e++ h/h+ !r!| Space for hire |
=============================================================================
------------------------------
From: "Tony Platt" <[EMAIL PROTECTED]>
Subject: Re: Many serial ports for Linux
Date: Fri, 2 Jul 1999 03:18:43 +1000
Try cyclades or digi or boca
relevant www before and com after
Tony
H. Wade Minter wrote in message <7lg2dm$[EMAIL PROTECTED]>...
>I'm looking for a device that will plug into a PCI slot on an intel
>system, and allow Linux to have many serial ports off of that card.
>
>An example of something similar to what I'm looking for is at:
>http://www.systech.com/catalog/ProductsCatalog.html#Parallex
>but it only connects to the parallel port, and isn't supported under
>Linux.
>
>Does anyone have any ideas?
>
>--Wade
------------------------------
From: "Max Barawid Jr." <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Re: Problem configuring PCMCIA Network card
Date: Thu, 01 Jul 1999 17:19:11 +0400
Rick,
Read PCMCIA HOWTO by David Hinds. It got lots of informations in there. I
am using Mandrake 5.3 with 2.2.7 kernel on a Toshiba 320CDT and I am having
a 3Com Cardbus Ethernet card and a Global 56K Modem and both are working.
You may have to install the latest pcmcia-cs-xxx driver. Good luck.
Max
Richard A. Bilonick wrote:
> Robert,
>
> I'm in the same (or at least similar) boat. I have a Linksys Combo
> PCMCIA EthernetCard which is a supported card. I have looked everywhere
> for info on how to set up PCMCIA cards for networking but nothing I have
> read has helped. I also have the strange problem that the cardinfo
> command cannot be found anywhere. Both cardctl ident and cardctl status
> give similar info to yours.
>
> When I try to connect eth0 to a driver, no reasonable driver appears in
> the list (I'm using Red Hat 6.0, BTW, on a Toshiba 2535 laptop.) From
> what I've been able to gather, something called pcnet_cs is involved but
> I don't know if this is a driver or not. It never shows up in the list
> of drivers. My PCMCIA modem card works just fine so I know PCMCIA is
> installed and working.
>
> It doesn't seem that anyone else knows or if they know they are keeping
> it secret. Why does it have to be this hard? I've gotten nowhere with
> support at Red Hat so far.
>
> I just got sound working. But to get it working I had to buy drivers
> from 4Front ($20) but it was worth it! I'd surely pay $20 to get
> networking through the PCMCIA card working!
>
> If you find out anything useful, I would appreciate hearing about it.
>
> Rick Bilonick
>
> Robert Chung wrote:
>
> > I am having trouble getting my PCMCIA ethernet card to work in Linux.
> > It is EPX-10BT PC Card Ethernet 10BT from Eiger labs,Inc., and it is
> > working well in Windows 95 and Windows NT. I am trying to add IP
> > address to this device, and "ifconfig" is telling me there is no
> > interface (I tried "eth0" for this device). I do not think my PCMCIA
> > card has an interface name assigned to it. What should I do? Thank
> > you in advance.
> >
> > PS: Below is output from "cardctl ident".
> > This card is taking up Socket 1.
> > Socket 0:
> > product info: "SMS", "MM510 56K", "021", "A"
> > manfid: 0x0013, 0x0000
> > function: 2 (serial)
> > Socket 1:
> > product info: "Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT",
> > "01"
> > manfid: 0x0004, 0x2000
> > function: 6 (network)
> >
> > ==============================================================
> >
> > Below is output from "cardctl status"
> >
> > Interface type is memory and I/O
> > IRQ 3 is exclusive, level mode, enabled
> > Speaker output is enabled
> > Function 0:
> > Config register base = 0x0200
> > Option = 0x61, status = 0x08, pin = 0000, ext = 0000
> > I/O window 1: 0x02f8 to 0x02ff, 8 bit
> > Socket 1:
> > Vcc = 5.0, Vpp1 = 5.0, Vpp2 = 5.0
>
> --
> --------------------------------------------------------------
> Rick Bilonick - mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
> Statistical Consulting for Business & Industry
> --------------------------------------------------------------
> "Where statistics help is as close as the Internet."
> http://www.nauticom.net/users/rab/consult.htm
> http://www.nauticom.net/users/rab/tutor.htm
> http://www.nauticom.net/users/rab/bookstor.htm
------------------------------
From: [EMAIL PROTECTED] (Scott W. Petersen)
Subject: SCSI Bus Timeout / Systems locks up
Date: Thu, 01 Jul 1999 17:51:06 GMT
Jun 23 23:19:26 linux kernel: SCSI bus is being reset for host 0
channel 0.
Jun 23 23:19:26 linux kernel: SCSI host 0 abort (pid 1264009) timed
out - resett
ing
Jun 23 23:19:26 linux kernel: SCSI bus is being reset for host 0
channel 0.
Jun 23 23:19:26 linux kernel: scsi : aborting command due to timeout :
pid 12640
13, scsi0, channel 0, id 0, lun 0 0x0a 04 ab 1c 04 00
Jun 23 23:19:27 linux kernel: SCSI host 0 abort (pid 1264009) timed
out - resett
ing
Jun 23 23:19:27 linux kernel: SCSI bus is being reset for host 0
channel 0.
Jun 23 23:19:28 linux kernel: SCSI host 0 channel 0 reset (pid
1264009) timed ou
t - trying harder
Jun 23 23:19:28 linux kernel: SCSI bus is being reset for host 0
channel 0.
Jun 23 23:19:28 linux kernel: SCSI host 0 reset (pid 1264009) timed
out again -
Jun 23 23:19:28 linux kernel: probably an unrecoverable SCSI bus or
device hang.
Jun 23 23:19:29 linux kernel: st0: Error with sense data: extra data
not valid C
urrent error st09:00: sns = 70 6
Jun 23 23:19:29 linux kernel: ASC=29 ASCQ= 0
Jun 23 23:19:29 linux kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00
0x00 0x00
0x10 0x00 0x00 0x00 0x00 0x29 0x00 0x00
This is the last line in the log file and the system locks up.
Is it hardware? This seems to happen when the scsi tape backup kicks
in at 23:15 pm. Lately we don't even get these error messages, the
machine just locks up at the time of backup.
Using SuSE 5.3 on an HP netserver E with a AIC-7880 scsi controller.
I have extra scsi messages turned on in the kernel now but have not
seen anything different.
====================================
Scott W. Petersen - N9SLA
Web Page: www.wwa.com/~scooter
Elgin, IL - USA
ICQ 8287204
Packet E-mail:
[EMAIL PROTECTED]
====================================
PLEASE note e-mail address is scooter @ wwa.com
------------------------------
From: Phil LoCascio <[EMAIL PROTECTED]>
Crossposted-To: linux.dev.scsi
Subject: Re: SGI Visual Workstation 540 and Qlogic 1080....
Date: Thu, 01 Jul 1999 11:22:08 -0400
Reply-To: [EMAIL PROTECTED]
Bryan wrote:
> <snip>
Hi,
Well the SGI instructions for IDE drives is pretty straightforward( of course,
"not supported slapped" everywhere).
I received an email from someone who has a hack that might fool the kernel into
recognising the SCSI stuff.
At least that is my interprestation.. If I have any joy, I'll post it. I think
there must be more folks out there with this problem.
>
> that's the easy way out. I bet sgi is working on linux for that box -
> and as complete a linux as is justified by business case. why try to
> hack stuff if there's any chance sgi will release some scsi drivers
> for their own hardware..
>
> get a cheapie ide drive and live with it for a while. its not so bad,
> and ide drives under a gig (used) are 'throw-away' money - certainly
> 'zero' compared to the pricetag for that sgi box.
Alas, time is money. And you are right, the cost of the box, makes an
IDE drive ($160 for 10G !!!!) seem most attractive.
Of course, I'd need to do a boatload of paperwork...:-)
Cheers
PHiL
------------------------------
From: [EMAIL PROTECTED] (Jeremy Crabtree)
Crossposted-To: alt.os.linux,comp.os.linux.misc
Subject: Re: Best sound card for use w/ Linux?
Date: 1 Jul 1999 15:31:07 GMT
Reply-To: [EMAIL PROTECTED]
Jeremy Crabtree allegedly wrote:
>Michel Catudal allegedly wrote:
>>David Fox wrote:
>>>
>>> According to listening tests at
>>> http://www.pcavtech.com/soundcards/summary/index.htm the SB Live has
>>> only mediocre fidelity. Certainly not the best.
>>>
>>
>>Their emulation of SB16 is what sucks.
>>If ran under winblows it works great and sound good.
>
>Check the site. They DID run it under windows, the performance was still
>disappointing...and the digital I/O didn't work very well.
>
>>
>>My friend has been unable to get it to work under Linux so to
>>say that it is a good choice would be a poor judgment call.
>
>Well...there are drivers, and people have gotten them to work...but it
>still would be on my list of recommended cards.
^
not
YIPES!
--
"Being myself a remarkably stupid fellow, I have had to unteach myself
the difficulties, and now beg to present to my fellow fools the parts
that are not hard" --Silvanus P. Thompson, from "Calculus Made Easy."
------------------------------
From: [EMAIL PROTECTED] (Tabman)
Subject: Re: Best PCI Soundcard?
Date: 1 Jul 1999 17:39:17 GMT
Reply-To: [EMAIL PROTECTED]
On 30 Jun 1999 23:04:47 GMT, Mike Frisch <[EMAIL PROTECTED]> wrote:
>On 30 Jun 1999 22:16:37 GMT, Tabman <[EMAIL PROTECTED]> wrote:
>> Do the Ensoniq AudioPCI cards come with a driver or utility that will
>>allow it to work with DOS games in MSDOS 6.0 ?
>
>If you want to run DOS games, you need a SB16,
I have one, but it doesn't work with all games ( such as Red
Alert. )
> but who uses DOS anymore
I still need it for some games which I can't get working in DOSEMU. If I
could run everything I need in Linux, then I would.
>and why are we discussing it in a Linux newsgroup?
I'm looking for a card which works well in both Linux and DOS.
'later...
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| "If you make people think they are
Tabman You may answer in | thinking, they will love you; if you
english, french, german | make them think, they will hate you."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Don Marquis
------------------------------
From: [EMAIL PROTECTED] (Alex Yung)
Subject: Re: [Q:] Format Jaz on Sun, read on Linux
Date: 1 Jul 1999 14:24:37 GMT
Reply-To: [EMAIL PROTECTED]
Sergei Starchik ([EMAIL PROTECTED]) wrote:
: I wonder if a Jaz disk, formatted on the Sun machine and having
: Solaris filesystem on it can then be connected to a Linux box and
: mounted there?
: So, basically, can Linux mount Sun filesystems ?
Yes, you mount it as ufs under read only mode. It works just fine for
me in kernel 2.0.36. Supposely, people are working on read/write mode.
I don't know the current status since I don't need write mode yet.
------------------------------
From: [EMAIL PROTECTED] (Ron Gibson)
Crossposted-To:
comp.os.ms-windows.win95.misc,comp.sys.hp.hardware,comp.sys.ibm.pc.hardware.storage,comp.sys.ibm.pc.hardware.systems,comp.os.linux.misc,comp.os.os2.misc,comp.os.os2.setup.misc
Subject: Re: Need Iomega Ditto 3200 (3.2G) Tape Drive info
Date: 1 Jul 1999 18:20:05 GMT
On Wed, 30 Jun 1999 15:44:31, "Actarus [VL]" <[EMAIL PROTECTED]>
wrote:
> > On 06/29/99 at 10:26 PM, [EMAIL PROTECTED] (Ron Gibson) said:
> >
> > >I'm considering getting an Iomega 3200 (3.2 G) floppy connected internal
> > >tape backup.
> >
> > Wow... that's GOTTA be slow.
>
> Nope... a floppy port connection is faster than a parallel port. Trust
> me, my Ditto 2000 is external.
Take a look at this from IOMEGA...
=========================================================================
omegazine(tm) - Support
Document #3000
Revision 003
What will happen if the Ditto Max, 3200, or 2GB Insider is
connected to a 500 Kb/sec. controller?
This document applies to the following:
Operating System: Windows 95, NT, 3.1x, MS-DOS
Device Type: Ditto Insider
Software Version: Ditto Tools, Iomega Backup, Flash!File
Why can't I use a Ditto Max, 3200, 2GB or 1700 tape drive
on a 500 Kb/sec. controller card?
The 3200MB* and 2GB* tape drive motors were designed to run at one of
two speeds, 1Mb/sec. or 2 Mb/sec. The controller card the tape drive is
connected to will send data at a specified speed. If the controller card
does not send the data at the same rate the tape drive motor is moving
the tape; the backup performance will drop as will the compression
ratio.
To use the Ditto 3200 or Ditto 1700 tape drive on a 500Kb/sec.
controller card, the tapes will have to be re-formatted on the
500Kb/sec. controller card. The Ditto 2GB* will require a 1Mb/ sec. or
faster controller card; the 2GB tape drive will not function on a
500Kb/sec. controller card. The Ditto Max must use the 4MB/sec
controller card included with the drive.
If the 3200 MB* tape drive is connected to a 500Kb/sec. card there are
several issues that will arise. First, the slower controller speed will
not allow for compression. In other words, the 3200 MB* tape drive
capacity will be decreased to 1600MB. In addition, the transfer rate of
the tape drives will decrease with both tape drives, which may cause the
tape drive to shoeshine. Iomega does not recommend using the Ditto Max,
3200MB* or 2GB* tape drives with a 500Kb/sec. controller card.
How do I know what speed my controller card is?
To determine if your floppy disk controller is able to support the Ditto
3200, 2GB, or 1700, Iomega has developed a utility that will indicate
the speed of your floppy disk controller called Iodetect.exe. This
utility is available from Iomega's WebStie. Once this file has been
downloaded, execute this program from the DOS prompt. This utility will
tell you the speed of your floppy disk controller.
If you are unable to obtain the Iodetect.exe utility, the speed of the
controller card usually can not be determined by looking at the card. To
determine the speed of your controller card, refer to the documentation
that came with the computer.
Iomega recommends using the Ditto Dash Accelerator card with the Ditto
3200 and 2GB* tape drives.
*Compression assumes 2:1 ratio. Actual compression will vary with
file and hardware configuration.
email: [EMAIL PROTECTED]
------------------------------
From: "Andrew J. Norman" <[EMAIL PROTECTED]>
Subject: Re: Adaptec 2940 UW SCSI Problem
Date: Thu, 01 Jul 1999 15:31:24 GMT
=====BEGIN PGP SIGNED MESSAGE=====
The problem is your termination of the SCSI chain.
Just so you know the Adaptec 2940UW will actually work with improper
termination (well kinda that is) However you will start to notice
messages like you are getting. The solution is to terminate both the high
and low ends of your SCSI chain. To do this:
1) If you have both external and internal devices you must terminate the
external chain with a 68pin wide ACTIVE terminator on the last
device. (I've tried a passive and a passthrough termination and they just
are not the same) If you have no external devices you need to set your
termination on the AH2940UW via it's bios (go into the SCSI bios...eg. hit
cntrl-a like the screen for ez-scsi says) and turn on the termination.
You will have three options "ON/ON" "OFF/ON" "ON/OFF" corresponding
HIGH/LOW termination (meaning external/internal if you read the docs
carefully) In the case that you have both external and internal devices
the setting should be "OFF/OFF" indicating that you will provide all
termination properly other wise you need the "ON/OFF" or "OFF/ON"
depending on which side of the bus you are using.
In the case of internal devices....again the last device on the chain MUST
be terminated. This is normally done on a seagate drive by means of a
jumper on the back jumper block (if you read the docs on your drive you
will see a jump number which turns on active termination. Alternatively
your drive may have a resistor block for passive termination, in which
case make sure that it is filled with the correct load and that any
jumpers that short this block out are set properly.
The last thing to mention is that this error can also be caused by a
T-configuration of the card (i.e. using the external, wide-internal,
narrow-internal simulatenously) While this will work sometimes (I ran a
narrow CD-R off the T for a while until I could hunt down a good 50-68 pin
adapter) It will give errors and should prove unreliable.
Interestingly Win/95/98/NT were not able to detect that my termination was
incorrect or that I had T'd the bus (this in contrast to Linux screaming
bloody murder about it) The most remarkable part of the whole thing was
that the system when shipped by a Large well known dealer (who will remain
nameless, but shame on them anyways) was configured with EVERY device on
the SCSI bus terminated (note: ONLY the last device can be terminated if
things are going to work right) and when I say EVERY I mean the disk,
tape, CD, etc....shame shame on them....but it does tell me that the
AH2940 is very good at picking up heavily attenuated signals...kudos to
Adaptec....
Well good luck with your new toy, remember that it really is all about
termination. When all else fails check the manual that came with the
AH2490 as it has a section on termination and cable lengths.
Andrew J. Norman
______________________________________________________________
Dept. of Physics Phone: 757-221-3571
College of William & Mary [EMAIL PROTECTED]
"It is only with the heart that one can see rightly;
what is essential is invisible to the eye" -The Little Prince
______________________________________________________________
On Wed, 30 Jun 1999, Warwick Ward-Cox wrote:
> I'm running Redhat 5.2 on a Compaq Deskpro 350
> Kernel 2.0.36 stock standard
> 128 Meg ram
>
> I have a 4.3 Gig IDE drive working fine, and have just added a
> AHA-2940UW SCSI adapter and a 9 Gig Seagate Barracuda drive to the
> system
>
> I did an insmod aix7xxx.o to install the scsi module it found the
> controller and drive all normally.
>
> I've managed to partition the drive and create the file systems.
>
> My problem now comes in that after I copied about 2 gig's of data into
> the partitions without any hassles I'm now getting the following
> messages repeated every 30 seconds or so :
>
> SCSI host 0 aborted (PID xxxxx) timed out - restarting
> SCSI bus being reset for host 0 .....................................
>
> Has anyone got any ideas on what is causing this?
>
Many thanks in advance
> Warwick.
>
>
>
> ------------------------------------------------------------------------------
> Replace no-spam in email address with mighty
>
>
>
>
>
=====BEGIN PGP SIGNATURE=====
Version: 2.6.3i
Charset: noconv
iQCVAwUBN3uJzCRqxyk0Hh01AQEY2gP/fiJXLp/bVBZeKsGd7tjmU9kfLjZ9/UXq
ognzvYtnzebL1m/PNtiJJGEWxrmkdhMAVrH9OyuVoYtn/n8NlftIqSCXsl9tcvmj
agOa2I1Ktn5xohr2c4+fmmUbO8Wz3dzuIqEUlLcsZp0EgRK3Un7VbEpvNcY+d+mz
g2lxsy2UyDA=
=92JD
=====END PGP SIGNATURE=====
------------------------------
From: Joker <[EMAIL PROTECTED]>
Subject: Lexmark 3200 and Linux
Date: Thu, 01 Jul 1999 14:17:55 -0400
Has anyone been able to get a Lexmark 3200 to work with Linux?
I have apsfilter and ghostscript installed but can't seem to find the
appropriate
filter. I have 4.0 Slackware (Linux 2.2.6 w/ libc5).
Thanks!
Dan
------------------------------
From: "richardmette" <[EMAIL PROTECTED]>
Subject: Permedia-based RealVision Power 3DGL Graphis adapter and RH Linux 6
Date: Thu, 1 Jul 1999 17:27:58 +0200
Hi,
does anyone have any clue as to why this particular board will not work with
the xfree86_3dlabs server?? -I've tried setting clock chip and all that
manually - with no luck at all....
your faithfully,
soeren groening
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
