Philby John <pj...@mvista.com> writes:
> On 02/08/2010 04:05 PM, Nori, Sekhar wrote:
>> Hi Philby,
>>
>> On Fri, Feb 05, 2010 at 19:23:43, Philby John wrote:
>>> Hello Sekhar,
>>>
>>
>> [...]
>>
>>>>> +/* Generate a pulse on the i2c clock pin. */
>>>>> +static void generic_i2c_clock_pulse(unsigned int scl_pin)
>>>>> +{
>>>>> + u16 i;
>>>>> +
>>>>> + if (scl_pin) {
>>>>> + /* Send high and low on the SCL line */
>>>>> + for (i = 0; i< 9; i++) {
>>>>> + gpio_set_value(scl_pin, 0);
>>>>> + udelay(20);
>>>>> + gpio_set_value(scl_pin, 1);
>>>>> + udelay(20);
>>>>> + }
>>>>
>>>> Before using the pins as GPIO, you would have to set the
>>>> functionality of these pins as GPIO. You had this code in
>>>> previous incarnations of this patch - not sure why it is
>>>> dropped now.
>>>>
>
> I now think that the previous versions were incorrect since
> davinci_cfg_reg() does not set the scl or sda pins for gpio
> functionality. Instead they set them as scl or sda which is not what
> we want at the time of pulsing. The previous versions used
> gpio_set_value() in disable_i2c_pins() and then called
> davinci_cfg_reg(). After which it called pulse_i2c_clock().
>
> Please correct me if my interpretation of the code is incorrect.
Can we get some resolution here?
I have a queue of davinci i2c patches waiting to go upstream, and I'd
like to get them in for 2.6.35.
The current i2c series is in the 'davinci-i2c' branch of davinci git.
Please submit an updated version so we can get this stuff upstream.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
