On 1/15/2011 4:27 AM, dirk.brande...@gmail.com wrote: > From: Dirk Brandewie <dirk.brande...@gmail.com> > > With multiple I2C adapters possible in the system each running at > (possibly) different speeds we need to move the controller > configuration bit field to the adapter.
This is also a good first step to support per-bus basis I2C bus-speed configuration, because current i2c-designware driver is going to configure all I2C busses with the same speed settings, unfortunately. > @@ -375,6 +373,7 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) > return -EIO; > } > > + > /* > * Prepare controller for a transaction and call i2c_dw_xfer_msg > */ ! > @@ -212,7 +214,6 @@ const struct pci_device_id *id) > > i2c_dw_init(dev); > > - > adap = &dev->adapter; > i2c_set_adapdata(adap, dev); > adap->owner = THIS_MODULE; ! As talked with Dirk-san before, this patch improves a situation at PCI driver side only, and we need to come up with a way for platform side in the future! -- Shinya Kuribayashi Renesas Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
