On Tuesday 17 May 2005 03:30 pm, Danny Lieberman wrote: > aharon > this is a familiar problem with FC3 solved as you already know by RH 9 > ESv4 > there are similar issues with gigabit eth nics > > if you need a whitebox version then use Centos 3.4
I just started installing Centos 4 on an IBM machine (described below) with two disks defined as an hardware mirror set. I chose the disk druid to partition the disks, and instead of seeing one disk which is really the hardware RAID mirror set, I see both individual disks. Has anyone ever seen this ? Am I doing something wrong ? > > br > danny > > Aharon Schkolnik wrote: > >Hi. > > > >I am trying to install Fedora Core 3 on an IBM xSeries 306 machine with > > two SCSI disks set up as a mirror set. The SCSI controller is AIC 7901, > > and the IBM RAID is called ServeRaid (I think). > > > >When I boot the Fedora installation CD, it does not find and disks. I have > >tried very hard to find a driver which I can supply during installation > > time, but have not been successful. > > > >When I boot from a RedHat 9 Enterprise 3 Update 4 installation CD, it DOES > >recognize the disk. lsmod shows modules named md, raid0, raid1, and raid5. > > > >Any ideas ? > > > >TIA ! -- The day is short, and the work is great, | Aharon Schkolnik and the laborers are lazy, and the reward | is great, and the Master of the house is | [EMAIL PROTECTED] impatient. - Ethics Of The Fathers Ch. 2 | 052-5560120 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]