> * Karan Singh [linux-india] <11/06/01 17:58 +0530>:
>
>
>> to load RH7.1 on my dual processor 768 MB RAM machine with SCSI hard disk
>> and megaraid support it takes a long time to load the aic7xxx driver and
>> after selecting the needed softwares, the install does not complete and
>> the machine simply hangs without any indication of what is happening.
>
>
> If that's a Compaq or IBM machine (with proprietory RAID) I suggest you
> search their support site - there's usually a howto on installation of
> redhat.
I feel, RH7.1 is bit screwed up in SCSI detection. It got failed in
Compaq Ml-350 SCSI
>
>> The same machine loads beautifully with the RH 6.2 and we have been using
>> it for nearly 8 months as our mail server. What is the problem with the RH
>> 7.1 operating system?
>
>
> We faced similar issues with a netfinity 5000. Simple solution - move to
> mandrake ;) (we were running short of time re bringing the box up, no time to
> do R&D, and redhat 6.2 is seriously out of date)
>
> --suresh
ya!! MDK detects the SCSI nicely.
Whaw!!!!! Saugata, Suresh is suggesting Mandrake...... (just kidding)
>
Archan
[EMAIL PROTECTED]
[EMAIL PROTECTED]
>
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
