On Wed, Feb 27, 2002 at 08:03:40PM +0800, Suresh Ramasubramanian wrote: >+++ Rajesh [linux-india] <27/02/02 16:37 +0530>: >> Feb 27 16:27:57 ho modprobe: modprobe: Can't locate module char-major-204 >> Feb 27 16:27:57 ho modprobe: modprobe: Can't locate module char-major-174 >> Feb 27 16:27:58 ho modprobe: modprobe: Can't locate module char-major-154 >> Feb 27 16:27:58 ho modprobe: modprobe: Can't locate module char-major-156 > >These are for USB / Multiport / Serial devices.
That does not include ttyS0, ttyS1 etc. At home on one partition this PCQ Linux 7.1 is still there, but I was not using it. Tried wvdial there and it worked on my gvc modem without problem. However the above errors were still coming in /var/log/messages. But these errors should not affect anything. > >modprobe -c ... and depmod -a, insmod ... if necessary. Or find out what >these represent and add modules.conf / conf.modules entries for them. I tried all that. But wvdial is not initialising the modem. I tried connecting the mouse to ttyS1 and it works fine. Now only thing left to be done is connecting a modem of different company say dlink or gvc. The one which is here is US Robotics. Anybody using this modem with RH Linux 7.1 ? If yes, can you send me any initialisation strings which might be required. I am short of ideas here. Thanks in advance. Peace -- Rajesh : ####[ Linux One Stanza Tip (LOST) ]########################### Sub : syslog output on console LOST #131 syslog entries are output to file as per the configuration in /etc/syslog.conf .. To have the same thing also shown on a tty not in use, add the following to /etc/syslog.conf: # Output to tty9 as well, and Alt-F9 to view *.* /dev/tty9 ####<[EMAIL PROTECTED]>#################################### : _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
